4531 [TTELEC]
High Voltage Planar Dividers; 高压平面分频器
| 型号： | 4531 |
| 厂家： | 
TT Electronics |
| 描述： | High Voltage Planar Dividers |
| 文件： | 总2页 (文件大小：198K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
High Voltage
Planar Dividers
Welwyn Components
4530 Series
• Dissipation up to 4.5 Watts at 70°C
Voltage up to 15 kV dc
•
TCR tracking down to 50 ppm/°C
•
Suitable for high voltage precision dividers,
feedback circuits and measurement systems
•
Electrical Data
4531*
4532*
4533*
4534*
4535*
4536*
4537*
Power rating at 70°C
Resistance range
watts
1.0
1.7
2.0
3.0
2.8
3.6
4.5
ohms 20K to 130M 36K to 250M 36K to 250M 62K to 450M 51K to 370M 82K to 660M 180K to 1.4G
Limiting element voltage
TCR (20°C to 70°C)
Resistance tolerance
Resistance ratio tolerances
Standard values
volts
ppm/°C
%
6.5K
6.5K
10K
10K
100+
15K
15K
15K
1, 2, 5
%
1, 2, 5
Any value to order
-55 to 125
Ambient temperature range
°C
+TCR tracking 50, 100 ppm/°C
*5th or 6th digit determines protection and lead type (see marking)
Physical Data
Dimensions (mm) of Uncoated Resistors*
Substrate
Type
L max
25.7
25.7
38.7
38.7
51.2
51.2
51.2
H max
9
T max
V nom
5.1
P nom
20.3
20.3
33.0
33.0
45.7
45.7
45.7
nominal
25 x 8.5
25 x 12.5
38 x 8.5
38 x 12.5
50 x 8.5
50 x 12.5
50 x 25
4531
4532
4533
4534
4535
4536
4537
2
2
2
2
2
2
2
13
9
5.1
5.1
x0.05
13
9
5.1
7.62
7.62
7.62
13
25.7
*Conformally coated resistors: Add 1mm to dimensions L and H and 0.5mm to T.
Coating can be extended up to 2mm down leads.
Example: A conformally coated 4531 measures 26.7 x 10 x 2.5 max.
General Note
Welwyn Components reserves the right to make changes in product specification without notice or liability.
All information is subject to Welwyn’s own data and is considered accurate at time of going to print.
A subsidiary of
TT electronics plc
© Welwyn Components Limited · Bedlington, Northumberland NE22 7AA, UK
Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com
Issue B · 03.02
207
High Voltage
Planar Dividers
4530 Series
Welwyn Components
Construction
Marking
A high quality alumina substrate is printed with a specially
selected high voltage resistor ink based on a ruthenium
oxide/glass system. A choice of protective systems is available.
Legend marked with type reference, resistance value,
tolerance ratio and manufacturing date code.
5th digit:
6th digit:
1 refers to leadframe
2 refers to copper wire lead
Choice of Protection
2 refers to conformal coating
3 refers to screen printed protection
4 refers to unprotected components
As standard components are supplied conformally coated
with an epoxy resin. By special request components can be
supplied unprotected or with a screen printed epoxy
‘handling’ protection.
Solvent Resistance
The marking and protection will withstand all commonly used
industrial cleaning solvents.
Terminations
Material
Solder-coated phosphor bronze lead-frame or
0.8mm dia, copper wire leads.
Solderability Meets the requirements of IEC 115-1, Clause
4.17.3.2.
Performance Data
Maximum
Typical
Load: 1000 hours at 70°C
∆R%
5
0.3
Derating from rated power at 70°C
Shelf life: 12 months at room temperature
Temperature rapid change
Zero at 125°C
∆R%
∆R%
0.3
0.1
0.05
5
< 0.1
0.02
0.02
< 3
Resistance to solder heat
∆R%
4531, 4532
4533, 4534
4535, 4536, 4537
Voltage coefficient of resistance ppm/volt
3
< 2
1.5
< 1
Application Notes
The terminations should not be bent closer than 1.5mm from
the body, and the recommended minimum bend radius is 1mm.
Non Standard Optional Features
The options listed below are some of the special features
which may be provided, subject to agreement.
Due to the high voltage which can appear between the resistor
body and any adjacent metal part, resistors should be mounted
at an adequate distance from other conducting parts.
Special substrate size.
Leadless version with palladium silver solder pads.
Special termination length, diameter and pitch.
Special designs for pulse applications.
Resistance value outside stated range.
Multiple dividers R1, R2, R3 etc.
Temperature Category
Lower temperature category is -55°C, upper temperature
category is 125°C. Due to the possibility of surface
condensation it is recommended that high voltage is not
applied to resistors in conditions of high humidity.
Packaging
Packed in foam within a box.
Design Flexibility
The experience of Welwyn engineers has been used to design
this generation of high voltage planar resistors to be suitable
for a majority of applications. However, should an application
require particular consideration, Welwyn designers are
available to provide advice and where applicable, to
recommend a non-standard product. Special sizes, designs
etc, can be prototyped at short notice.
© Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK
Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com
Issue B · 03.02
208
相关型号：
©2020 ICPDF网 联系我们和版权申明