CR2010 [TTELEC]
Surface Mounted Resistors; 表面贴装电阻器型号: | CR2010 |
厂家: | TT Electronics |
描述: | Surface Mounted Resistors |
文件: | 总3页 (文件大小:165K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Surface Mounted
Resistors
Welwyn Components
CR Series
• CECC released products
• Custom designs/sizes available
• Any resistance value available within specified range
• Terminations available for wire bonding or soldering
• Available in sizes down to 0503
• Resistance range 1 ohm to100M ohms
• Tolerances down to 0.1%
• Solder terminations have a nickel barrier layer
• Shorting Links available
Electrical Data
Commercial
CR0503
CR0805
CR1005
0.125
CR1206
CR2010
CR2512
Notes
Power rating at 70°C
Resistance range
watts
0.063
0.125
0.25
0.5
1.0
ohms 1R to 10M
1R to 100M
150
1R to 1M
400
Limiting element voltage
TCR -55° to +155°C
volts
50
100
200
500
ppm/°C
<10 ohms 350: 10 to 100 ohms 200:
100 to 1M ohm 100: >1M ohm 250
0.1, 0.25, 0.5, 1, 2, 5
Resistance tolerance
%
°C
See table of value ranges
Ambient temperature range
-55 to 155
Approved CECC 40401-004
Power rating at 70°C
Resistance range
CR0805
CR1206
watts
ohms
volts
0.125
0.25
1R to 10M
Limiting element voltage
TCR -55°C to +125°C
TCR +20°C to +70°C
Resistance tolerance
100
200
ppm/°C
ppm/°C
%
<10 ohms 200: 10 to 1M 100: >1M 200
<10 ohms 200: 10 to 1M 50: >1M 100
0.5, 1, 2, 5
See table of value ranges
Ambient temperature range
°C
-55 to +125
Approved CECC 40401-008
Power rating at 70°C
Resistance range
CR0805
CR1206
CR2010
0.5
CR2512
1.0
watts
ohms
0.125
1R to 10M
100
0.25
1R to 10M 1R to 1M
200 400
1R to 1M
500
Limiting element voltage
TCR -55°C to +155°C
volts
ppm/°C
<10 ohms 200: 10 to 1M ohms 100:
>1M ohms 250
Resistance tolerance
%
°C
0.1, 0.25, 0.5, 1, 2, 5
-55 to 155
See table of value ranges
Ambient temperature range
Approved CECC 40401-003
Power rating at 70°C
Resistance range
CR0805
CR1206
0.125
watts
ohms
0.063
1R to 3M
100
1R to 5M
200
Limiting element voltage
TCR -55°C to +125°C
volts
ppm/°C
<5 ohms 500: 5 to 10 ohms 350:
10 to 3M ohms 100: >3M ohms 250
0.25, 0.5, 1, 2, 5
Resistance tolerance
%
°C
See table of value ranges
Any value to order
Ambient temperature range
-55 to 125
Values
E24 & E96 preferred
Thermal impedance
°C/watt
800
360
290
200
80
70
Mounted on custom
designed PCB’s
General Note
Welwyn Components reserves the right to make changes in product specification without notice or liability.
All information is subject to Welwyn’s own data and is considered accurate at time of going to print.
A subsidiary of
TT electronics plc
© Welwyn Components Limited · Bedlington, Northumberland NE22 7AA, UK
Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com
Issue F · 10.05
17
Surface Mounted
Resistors
Welwyn Components
CR Series
Physical Data
Dimensions of Standard Styles (mm) & Weight (g)
Wrap around
Style
0503
0805
1005
1206
2010
2512
L
W
T max
0.5
A
B†
Not available
0.3 0.15 0.9 min 0.3 0.1
Not available 0.4 0.15 0.015
0.4 0.2 1.7 min 0.4 0.15 0.020
C
Wt
0.20 0.1 0.005
0.009
T
C
A
1.25 0.2 0.63 .15
2.0 0.2 1.25 0.15
2.5 0.3 1.25 0.2
3.2 0.2 1.6 0.2
5.1 0.3 2.5 0.2
6.5 0.3 3.2 0.2
B
C
L
W
A
0.6
T
Wrap-around terminations
(3 faces)
0.7
L
W
0.7
Planar terminations
0.7
0.6 0.3 3.0 min
0.6 0.3 4.4 min
N/A
N/A
0.036
0.055
Alternative styles for
surface mounting resistors
0.7
†This dimension determines the number of conductors which may pass under the surface mounted device.
Construction
Thick film resistor material, overglaze and organic protection
are screen printed on a 96% alumina substrate.
Solderability
Wrap-around terminations have an electroplated nickel barrier
and solder coating, this ensures excellent ‘leach’ resistance
properties and solderability. They will withstand immersion in
solder at 260°C for 30 seconds.
Terminations
Planar (or single-sided) termination is gold and suitable for
wire-bonding; wrap-around is suitable for soldering.
Marking
All relevant information recorded on the primary package or reel.
Performance Data
CECC 40401-008 CECC40401-004 CECC40401-003
Requirements Requirements Requirements
Actual
Maximum
Typical
Load at rated power: 1000 hours at 70°C ∆R%
2
2
≤ 3M3 2
2
0.25
>3M3 3
Shelf life: 12 months at room temp.
Derating from rated power at 70°C
Overload
∆R%
-
-
-
0.1
0.02
Zero at 155°C
Zero at 125°C
Zero at 125°C
∆R% 0805:1 1206:0.5
0.5
1
2
1
to 10M 1
>10M 2
1
0.1
0.2
Dry Heat: 1000 hours at UCT
(125°C for 003 & 004 - 155°C for 008)
Long term damp heat
∆R%
2
≤ 3M3 2
>3M3 3
>10M 1
0.25
∆R%
∆R%
∆R%
volts
2
2
2
1
2
Temperature rapid change
Resistance to solder heat
Voltage proof
0.5
0.5
0.5
0.5
0.25
0.05
0.25
0.05
0805 : 200
2010 : 400
1206 : 300
2512 : 500
0503 : 100
All others : 500
Note: An 0.01 ohm addition to be added to the performance of all resistors <10 ohms
Value Ranges (ohms)
Tolerance
%
Size
5
2
1
0.5
0.25
0.1
N/A
0503
0805
1005
1206
2010
2512
1 to 10M
1 to 100M
1 to 100M
1 to 100M
1 to 1M
1 to 10M
1 to 50M
1 to 50M
1 to 50M
1 to 1M
1 to 1M
10 to 10M
1 to 20M
1 to 20M
1 to 25M
1 to 1M
1 to 1M
100 to 1M
10 to 10M
10 to 10M
10 to 10M
10 to 10M
10 to 10M
N/A
100 to 1M
100 to 1M
100 to 1M
100 to 1M
100 to 1M
100 to 1M
100 to 1M
100 to 1M
N/A
1 to 1M
N/A
© Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK
Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com
Issue F · 10.05
18
Surface Mounted
Resistors
Welwyn Components
CR Series
Application Notes
Operating Temperature Range
Packaging
Wrap-around Termination
Chip resistors are supplied taped and reeled on standard
8mm tape to IEC 286-3.
The chips themselves can operate at a maximum temperature
of 155°C (see performance claims above). For soldered chips,
the joint temperature should not exceed 110°C. This
condition is met when the stated power levels at 70°C are
used.
Quantity per reel; 3000 max.
Mounting
Planar Terminations
Resistor chips are supplied in waffle packs.
This chip resistor is ideally suited for handling by automatic
methods due to its rectangular shape and the small
dimensional tolerances. Electrical connection to a ceramic
substrate or to a printed circuit board can be made by wire
bonding (eg suffix ‘G’ in CR0805G) or by reflow soldering of
wrap-around terminations (eg suffix ‘F’ in CR0805F).
The ‘F’ terminations provide good leach properties and ensure
reliable contact. Due to the robust construction the resistor
chip can be immersed in the solder bath for 30 seconds at
260°C. This enables the resistor to be mounted on one side
of a printed circuit board and other wire-leaded components
on the other side.
Ordering Procedure
Specify type reference, value and tolerance as shown in this example of CR0805 10M 0.1%:
Type
CR0805
10M
B
Resistance value
(IEC62 code)
Tolerance
(IEC62 code)
B
C
D
F
0.1%
0.25%
0.5%
1%
G
J
2%
5%
© Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK
Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com
Issue F · 10.05
19
相关型号:
CR2010-FX-1200ELF
Fixed Resistor, Ruthenium Oxide, 0.5W, 120ohm, 200V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 2010, CHIP, ROHS COMPLIANT
BOURNS
©2020 ICPDF网 联系我们和版权申明