MF2S6802KA [TTELEC]
Power Metal Film Resistor; 功率金属膜电阻器型号: | MF2S6802KA |
厂家: | TT Electronics |
描述: | Power Metal Film Resistor |
文件: | 总3页 (文件大小:155K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Power Metal Film
Resistor
Legend mark or color code
depending on size
MF-S Series
• Flameproof protection
• Small size for power rating
Flameproof protection
• Range of 4 sizes: 0.5 watt to 3 watt at 70°C
Solder coated
copper wire
Electrical Data
Power
Rating
@ 70°C
(watts)
Limiting
Operating
Temperature
Range
Resistance
Range
Isolation Resistance
Thermal
Impedance
(°C/watt)
IRC
Type
Element
Voltage
(volts)
TCR
(ppm/°C)
Standard
Values
Voltage
(volts)
Tolerance
(%)
(ohms)
(°C)
MF1/2S
MF1S
MF2S
MF3S
0.5
1.0
2.0
3.0
140
110
80
0.1 - 1M
150
500
700
≤1Ω: 5, 10
E24
Preferred
350
-55 to 235
>1Ω: 1, 2, 5
<1Ω: 350
0.1 - 470K
≥10Ω: 150
60
Environmental Data
Characteristic
Maximum
Loaded at Rated Power: 1000 hrs at 70°C
Shelf Life: 12 months at room temperature
Derating from Rated Power at 70°C
5
1
zero at 155°C
Climatic
1
Climatic Category
40/125/56
0..5
Temperature Rapid Change
Resistance to Solder heat
0.5
General Note
IRC reserves the right to make changes in product specification without notice or liability.
All information is subject to IRC’s own data and is considered accurate at time of going to print.
A subsidiary of
TT electronics plc
Wire and Film Technologies Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
MF-S Series Issue October 2008 Sheet 1 of 3
Power Metal Film
Resistor
Physical Data
d
D
L
f
Dimensions (Inches and (mm)) & Weight (g)
PCB
IRC
Type
Min Bend
Radius
L max
D max
f min
d nom
Mounting
Centers
Wt. nom
0.244
(6.2)
0.090
(2.3)
0.039
(21.0)
0.024
(0.6)
0.402
(10.2)
0.024
(0.6)
MF1/2S
MF1S
MF2S
MF3S
0.3
0.5
0.9
1.1
0.354
(9.0)
0.134
(3.4)
0.772
(19.6)
0.031
(0.8)
0.500
(12.7)
0.047
(1.2)
0.492
(12.5)
0.165
(4.2)
0.700
(17.8)
0.031
(0.8)
0.724
(18.4)
0.047
(1.2)
0.571
(14.5)
0.201
(5.1)
0.937
(23.8)
0.031
(0.8)
0.799
(20.3)
0.047
(1.2)
Construction
Marking
The resistance element is a precisely controlled thin film
of metal alloy on a high purity ceramic core, protected
by a cement coating applied so that terminations remain
completely clear.
MF Series resistors are color coded with 4 bands. IEC 62
colors are used.
Solvent Resistance
The body protection and marking are resistant to all normal
This permits a well defined body length, (clean lead to
clean lead dimension L).
industrial cleaning solvents suitable for printed circuits.
Flammability
Terminations
The resistors will not burn or emit incandescant particles under
Material
Solder-coated copper wire.
any condition of applied temperature or power overload.
Strength
The terminations meet the
requirements of IEC 68.2.21
Solderability
The terminations meet the
requirements of IEC 115-1,
Clause 4.17.3.2
Wire and Film Technologies Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
MF-S Series Issue October 2008 Sheet 2 of 3
Power Metal Film
Resistor
Ordering Data
Application Notes
1. If the resistors are to dissipate full rate power, it
is recommended that the terminations should not be
soldered closer than 4mm from the body.
Sample Part No.
MF2S
6802
J
R
IRC Type
MF1/2S, MF1S, MF2S, MF3S
Value
2. Due to operating temperature limitations imposed
by some pcb materials, derating may be necessary. An
estimate of the temperature rise to be expected can be
calculated using the thermal impedance figures given
under Electrical Data.
(Use IEC 62 code)
Tolerance
(Use IEC 62 code)
J = 5%, K = 10%
Packaging Details
3. Lead formed resistors can also be supplied. Standard
options of Lancet, Radial, and Goalpost forming are
shown in lead Form Information section.
R = Reel, A = Ammo
Type
Code MF1/2S
MF1S
2500
2500
1000
MF2S
2500
2500
1000
MF3S
1000
N/A
MF1/2S
MF1S
MF2S
R
A
A
5000
5000
2000
N/A
Packaging
The preferred method of packaging is taped and ammo packed.
See figure 1 for critical dimensions.
Alternative packaging is available by special request.
6
b
6
f
f
2
1
c
Body location:
f
f
1 - 2
≤ 1.4mm
Type
b
c
5
MF1/2S
MF1S
MF2S
MF3S
52
52
52
67
5
5
10
Wire and Film Technologies Division • 4222 South Staples Street • Corpus Christi Texas 78411 USA
Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Website: www.irctt.com
MF-S Series Issue October 2008 Sheet 2 of 3
相关型号:
MF2WS1011BTR
Fixed Resistor, Metal Film, 2W, 1010ohm, 500V, 0.1% +/-Tol, 50ppm/Cel, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
MERITEK
MF2WS1020DTR
Fixed Resistor, Metal Film, 2W, 102ohm, 500V, 0.5% +/-Tol, 50ppm/Cel, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
MERITEK
MF2WS1021BTR
Fixed Resistor, Metal Film, 2W, 1020ohm, 500V, 0.1% +/-Tol, 50ppm/Cel, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
MERITEK
MF2WS1021FTR
Fixed Resistor, Metal Film, 2W, 1020ohm, 500V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
MERITEK
MF2WS1022FTR
Fixed Resistor, Metal Film, 2W, 10200ohm, 500V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
MERITEK
MF2WS1023FTR
Fixed Resistor, Metal Film, 2W, 102000ohm, 500V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
MERITEK
MF2WS1051BTR
Fixed Resistor, Metal Film, 2W, 1050ohm, 500V, 0.1% +/-Tol, 50ppm/Cel, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
MERITEK
MF2WS1051DTR
Fixed Resistor, Metal Film, 2W, 1050ohm, 500V, 0.5% +/-Tol, 50ppm/Cel, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
MERITEK
MF2WS1051FTR
Fixed Resistor, Metal Film, 2W, 1050ohm, 500V, 1% +/-Tol, 50ppm/Cel, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
MERITEK
MF2WS1061BTR
Fixed Resistor, Metal Film, 2W, 1060ohm, 500V, 0.1% +/-Tol, 50ppm/Cel, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
MERITEK
MF2WS1062BTR
Fixed Resistor, Metal Film, 2W, 10600ohm, 500V, 0.1% +/-Tol, 50ppm/Cel, Through Hole Mount, AXIAL LEADED, ROHS COMPLIANT
MERITEK
©2020 ICPDF网 联系我们和版权申明