MO5S [TTELEC]
Power Metal Oxide Film Resistors; 功率金属氧化膜电阻型号: | MO5S |
厂家: | TT Electronics |
描述: | Power Metal Oxide Film Resistors |
文件: | 总2页 (文件大小:233K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Power Metal Oxide
Film Resistors
Welwyn Components
MO-S Series
Small size for power rating
•
Can replace carbon composition in many
pulse handling applications
•
Flameproof protection
•
Electrical Data
MO1/2S
0.5
MO1S
1.0
MO2S
2.0
MO3S
3.0
MO5S
5.0
Power rating at 70°C
Restance range
Limiting element voltage
TCR
Isolation voltage
Resistance tolerance
Standard values
watts
ohms
volts
ppm/°C
volts
10R - 50K
250
10R - 100K
350
10R - 100K
500
350
350
140
500
5, 10
E24 preferred
80
700
35
%
Thermal impedance
Ambient temperature range
°C/watt
°C
110
60
-55 to +155
Physical Data
Dimensions (mm) and Weight (g)
pcb
mounting
Min
bend
Wt.
Type
L max.
6.2
9.0
12.5
14.5
25.0
D max.
2.5
3.6
4.2
5.3
f min.
21.0
19.6
17.8
23.8
27.6
d nom. centres
radius
0.6
1.2
1.2
1.2
1.2
nom.
0.3
0.5
0.9
1.1
4.3
MO1/2S
MO1S
MO2S
MO3S
MO5S
0.6
0.8
0.8
0.8
0.8
10.0
12.5
15.0
20.0
30.0
d
D
L
f
8.5
Construction
Marking
The tin oxide resistance element is deposited onto a high
MO1/2S, MO1S, MO2S and MO3S resistors are colour coded
with four bands. IEC 62 colours are used. For larger sizes type
reference, resistance value and tolerance are legend marked.
The resistance value marking conforms to lEC 62.
purity ceramic rod. End caps are force fitted and termination
wires are welded to the end caps. The element is adjusted to
the required resistance value by a helical cut; finally a cement
protection is applied to the resistor body prior to marking
with indelible ink.
Solvent Resistance
The body protection and marking are resistant to all normal
industrial cleaning solvents suitable for printed circuits.
Terminations
Material
Resistor sizes up to and including the MO3S
use solder coated copper terminations. MO4S
and MO5S use solder coated steel cored
terminations.
Flammability
The resistor coating will not burn or emit incandescent
particles under any condition of applied temperature or
power overload.
Strength
The terminations meet the requirements of
IEC 68.2.21.
Solderability The terminations meet the requirements of
IEC 115-1, Clause 4.17.3.2.
General Note
Welwyn Components reserves the right to make changes in product specification without notice or liability.
All information is subject to Welwyn’s own data and is considered accurate at time of going to print.
A subsidiary of
TT electronics plc
© Welwyn Components Limited · Bedlington, Northumberland NE22 7AA, UK
Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email :info@welwyn-tt.com · Website: www.welwyn-tt.com
Issue C · 07.04
149
Power Metal Oxide
Film Resistors
MO-S Series
Welwyn Components
Performance Data
Maximum
Load at rated power: 1000 hrs at 70°c
Shelf life: 12 months at room temperature
Derating
∆R%
∆R%
5
2
See derating curve
Climatic
∆R%
1
40/125/56
0.5
Climatic category
Temperature rapid change
Resistance to solder heat
∆R%
∆R%
0.5
Application Notes
MO-S Series Derating Curve
100
90
80
70
60
50
40
30
20
10
0
1. If the resistors are to dissipate full rated power, it is
recommended that the terminations should not be
soldered closer than 4mm from the body.
2. Due to operating temperature limitations imposed by some
pcb materials, derating may be necessary. An estimate of
the temperature rise to be expected can be calculated
using the thermal impedance figures given under Electrical
Data.
60
80
100
120
140
160
180
200
220
240
Ambient Temp
3. MO-S resistors can also be supplied pre-formed.
See lead form section for details.
Figure 1
Packaging
Our standard packaging for MO1/2S, MO1S, MO2S and MO3S
is taped and ammo packed, MO5S is taped and reeled. The
critical dimensions are shown in Figure 1.
c
The component wires will not protrude beyond the outside
edge of the tapes.
f1
f2
b
6
6
Pre-formed resistors are supplied loose packed in plastic bags
or boxes.
Body Location f1 – f2 ≤ 1.4 mm
Alternative packaging available by request.
Type
MO1/2S MO1S MO2S MO3S MO5S
b
c
52
5
52
5
52
5
67
10
85
10
Standard Quantities Per Package
Type
MO1/2S MO1S MO2S MO3S MO5S
Reel
5000
5000
2500
2500
2500
1500
1000
1000
700
n/a
Ammo pack
© Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK
Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com
Issue C · 07.04
150
相关型号:
©2020 ICPDF网 联系我们和版权申明