OPB852A2 [TTELEC]
Slotted Optical Switch;型号: | OPB852A2 |
厂家: | TT Electronics |
描述: | Slotted Optical Switch |
文件: | 总3页 (文件大小:696K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Slotted Optical Switch
OPB852A1-3
OPB853A1-3
Features:
Inexpensive opaque plasꢁc housing
Choice of transistor (OPB852) or photodarlington (OPB853) output
0.125” (3.18 mm) slot width
0.290” (7.37 mm) lead spacing
Apertured for high resoluꢁon
Descripꢀon:
Sloꢀed opꢁcal switches in the OPB852, and OPB853 series consist of an infrared emiꢂng diode and a NPN silicon
phototransistor or photodarlington, mounted on opposite sides of a 0.125” (3.175 mm) wide slot. The OPB852A, OPB852B
and OPB852C have phototransistor output, while the OPB853A, OPB853B and OPB853C have photodarlington output.
On each of these devices, the emiꢀer has a molded-in aperture of 0.050” x 0.050” (1.270 mm x 1.270 mm) and the
phototransistor (OPB852) or photodarlington (OPB853) has a molded-in aperture of 0.010” x 0.050” (0.254 mm x 1.270
mm).
Phototransistor or photodarlington switching occurs when an opaque object passes through the slot.
Slot
Width/
Aperture
Emitter/
Sensor
Lead
Length /
Spacing
Applicaꢀons:
Part
LED Peak
Non-contact interrupꢁve object sensing
Number Wavelength Sensor Depth
Assembly line automaꢁon
Machine automaꢁon
Equipment security
Machine safety
OPB852A1
OPB852A2
Transistor
OPB852A3
0.120" /
0.315”
0.425" /
0.290"
890 nm
0.05" / 0.01"
OPB853A1
OPB853A2
Darlington
OPB853A3
OPB852
OPB853
1
3
1
3
2
4
2
4
Pin # Description
1
2
Anode
[ MILLIMETERS]
INCHES
Cathode
DIMENSIONS ARE IN:
3
4
Collector
Emitter
RoHS
General Note
TT Electronics | Optek Technology, Inc.
1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
www.ꢀelectronics.com | sensors@ꢀelectronics.com
Issue A 11/2016 Page 1
© TT electronics plc
Slotted Optical Switch
OPB852A1-3, OPB853A1-3
Electrical Specificaꢀons
Absolute Maximum Raꢀngs (TA=25°C unless otherwise noted)
Storage & Operaꢁng Temperature Range
-40°C to +85° C
Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron]
260° C(1)
Input Diode
Forward DC Current
40 mA
3 A
Peak Forward Current (1 μs pulse width, 300 pps)
Reverse DC Voltage
2 V
Power Dissipaꢁon
100 mW(2)
Output Phototransistor
Collector-Emiꢀer Voltage
Emiꢀer-Collector Voltage
30 V
5 V
Power Dissipaꢁon
100 mW(2)
Electrical Characterisꢀcs (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP
MAX UNITS
TEST CONDITIONS
Input Diode (see OP140 for addiꢁonal informaꢁon—OPB852A_, OP245 for addiꢁonal informaꢁon—OPB853A)
VF
IR
Forward Voltage
Reverse Current
-
-
-
-
1.7
V
IF = 20 mA
VR = 2 V
100
µA
Output Phototransistor (see OP550 for addiꢁonal informaꢁon—OPB852A_, OP565 for addiꢁonal informaꢁon—OPB853A)
Collector-Emiꢀer Breakdown Voltage
V(BR)CEO
OPB852A1, OPB852A2, OPB852A3
OPB853A1, OPB853A2, OPB853A3
30
15
-
-
-
-
V
V
IC = 1 mA
IC = 1 mA
V(BR)ECO
ICEO
Emiꢀer-Collector Breakdown Voltage
Collector-Emiꢀer Dark Current
5
-
-
-
V
IE = 100 µA
VCE = 10 V
-
100
nA
Combined
Saturaꢁon Voltage
-
-
-
-
-
-
OPB852A1, OPB852A2
OPB852A3
OPB853A1, OPB853A2, OPB853A3
0.4
0.4
1.0
V
V
V
IC = 500 µA, IF = 20 mA
IC = 1.8 mA, IF = 20 mA
IC = 1.8 mA, IF = 10 mA
VCE(SAT)
On-State Collector Current
OPB852A1
1.0
2.0
4.0
2.5
5.0
-
-
-
-
-
-
-
-
-
-
-
-
mA
mA
mA
mA
mA
mA
VCE = 5 V, IF = 20 mA
VCE = 5 V, IF = 20 mA
VCE = 5 V, IF = 20 mA
VCE = 1.5 V, IF = 5 mA
VCE = 1.5 V, IF = 5 mA
VCE = 1.5 V, IF = 5 mA
OPB852A2
OPB852A3
OPB853A1
OPB853A2
IC(ON)
OPB853A3
10.0
Notes:
(1) RMA flux is recommended. Duraꢁon can be extended to 10 seconds maximum when flow soldering.
(2) Derate linearly 1.67 mW/° C above 25° C.
(3) Methanol and isopropanol are recommended as cleaning agents. Housings are soluble in chlorinated hydrocarbons and ketones. Highly acꢁvated,
water soluble fluxes may aꢀack housings in some situaꢁons.
(4) All parameters tested using pulse technique.
Slotted Optical Switch
OPB852A1-3, OPB853A1-3
Performance
OPB852 & OPB853 - Flag Next to Sensor
OPB852 & OP853 - Flag Next to Emitter
1.20
1.00
0.80
0.60
0.40
0.20
0.00
1.20
1.00
0.80
0.60
0.40
0.20
0.00
Right to Left
Left to Right
Top to Bottom
Right to Left
Left to Right
Top to Bottom
0.00
0.05
0.10
0.15
0.20
0.25
0.00
0.05
0.10
0.15
0.20
0.25
Displacement Distance (inches)
Displacement Distance (inches)
OPB852 & OPB853 - Flag in Middle of Slot
1.20
1.00
0.80
0.60
0.40
0.20
0.00
Top to Bottom
0
Right to Left
Left to Right
Top to Bottom
Emitter
Left to Right
Right to Left
Sensor
0
Width
0.00
0.05
0.10
0.15
0.20
0.25
Displacement Distance (inches)
General Note
TT Electronics | Optek Technology, Inc.
1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
www.ꢀelectronics.com | sensors@ꢀelectronics.com
Issue A 11/2016 Page 3
© TT electronics plc
相关型号:
©2020 ICPDF网 联系我们和版权申明