OPB941L55Z [TTELEC]
Slotted Optical Switch;型号: | OPB941L55Z |
厂家: | TT Electronics |
描述: | Slotted Optical Switch |
文件: | 总9页 (文件大小:751K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
OPB930 and OPB940 (L and W Series)
L Package
Features:
Choice of aperture size
Choice of output configuraꢁons
Choice of opaque or IR transmissive shell
Choice of pins (L) or wires (W)
0.125” (3.18 mm) slot width
0.320” (8.128 mm) lead spacing for PCBoard (side mounꢁng)
Data rates to 250 kBaud
W Package
Descripꢀon:
The OPB930 and OPB940 series of Photologic® photo integrated circuit switches provide opꢁmum flexibility for the design
engineer. Building from a standard housing with a 0.125” (3.18 mm) wide slot, a user can specify the type and polarity of
TTL output, discrete shell material, aperture width and either 0.350” (8.9 mm) long pins
(L Series) or 24” (610 mm) AWG, UL listed wire leads (W Series).
All housings are made from an opaque grade of injecꢁon-molded plasꢁc that minimizes the assembly’s sensiꢁvity to both
visible and near-infrared ambient radiaꢁon. Discrete shells (exposed on the parallel faces inside the device throat) are
either IR transmissive plasꢁc (for applicaꢁons where aperture contaminaꢁon may occur) or opaque plasꢁc (for maximum
protecꢁon against ambient light).
Electrical output can be specified as either TTL Totem Pole or TTL Open Collector, either of which can be supplied with
buffer or inverter output polarity. All devices have the added stability of a built-in hysteresis amplifier.
Custom electrical, wire and cabling and connectors are available. Contact your local representaꢁve or OPTEK for more
informaꢁon.
Applicaꢀons:
Mechanical switch replacement
Speed indicaꢁon (tachometer)
Mechanical limit indicaꢁon
Part Number Guide — OPB930 and OPB940 Series
OPB 9 X X X X X Z———————For “W” series only
Optek Assembly
Sensor Aperture:
1 — 0.010” (0.254 mm)
5 — 0.050” (1.27 mm)
Photologic® Photo Integrated
Circuit Sensor Family
Emitter Aperture:
5 — 0.050” (1.27 mm)
Discrete Shell Material:
3 — Side mount IR transmissive
Plastic discrete shell
Mounting configurations:
L — Solder leads termination
W — Wire termination
4 — Side mount opaque
Electrical Specification Variations:
0 = Buffered Totem-Pole Output
1 = Buffered Open-Collector Output
2 = Inverted Totem-Pole Output
3 = Inverted Open-Collector Output
Plastic discrete shell
CONTAINS POLYSULFONE
To avoid stress cracking, we suggest using ND
Industries’ Vibra-Tite for thread-locking.
Vibra-Tite evaporates fast without causing
structural failure in OPTEK’s molded plastics.
RoHS
General Note
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ꢀelectronics.com
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
Issue B 10/2016 Page 1
© TT electronics plc
OPB930, OPB940 Buffered Totem-Pole
OPB931, OPB941 Buffered Open-Collector
OPB933 & OPB943 Inverted Open-Collector
OPB932, OPB942 Inverted Totem-Pole
Absolute Maximum Raꢀngs (TA = 25° C unless otherwise noted)
Supply Voltage, VCC (not to exceed 3 seconds)
Operaꢁng Temperature Range
10 V
-40°C to +70° C
-40°C to +85° C
260° C
Storage Temperature Range
Lead Soldering Temperature (1/16 inch (1.6mm) from the case for 5 sec. with soldering iron (1)
Input Infrared LED
Input Diode Power Dissipaꢁon (2)
Output Photologic® Power Dissipaꢁon (3)
Total Device Power Dissipaꢁon (4)
100 mW
200 mW
300 mW
Output Photologic®
Voltage at Output Lead (Open Collector Output)
Diode Forward DC Current
35 V
40 mA
2 V
Diode Reverse DC Voltage
Notes:
(1) RMA flux is recommended. Duraꢁon can be extended to 10 seconds maximum when flow soldering.
(2) Derate linearly 2.22 mW/°C above 25°.
(3) Derate linearly 4.44 mW/°C above 25°.
(4) Derate linearly 6.66 mW/°C above 25°.
(5) OPB930L/OPB940L series devices are terminated with 0.020” square leads designed for PCBoard mounꢁng.
(6) Methanol and isopropanol are recommended as cleaning agents. Plasꢁc housing is soluble in chlorinated hydrocarbons and ketones.
(7) All parameters tested using pulse technique.
General Note
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
www.optekinc.com | www.ꢀelectronics.com
considered accurate at ꢁme of going to print.
Issue B 10/2016 Page 2
© TT electronics plc
Color- Pin # Description
PCBoard (L) version
Red—1
Black—2
White—3
Blue—4
Anode
Cathode
VCC
Output
Ground
Green—5
[ MILLIMETERS]
DIMENSIONS ARE IN:
INCHES
Wired (W) version
The W Series includes wire terminations of 24” (610 mm) 7-strand, 26
AWG UL insulated wire on each terminal. Each device incorporates a
wire strain relief at the housing surface. The insulation functions and
colors are: anode (red), cathode (black), phototransistor collector (white)
and phototransistor emitter (green).
General Note
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ꢀelectronics.com
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
Issue B 10/2016 Page 3
© TT electronics plc
Electrical Characterisꢀcs (TA = 25° C unless otherwise noted)
SYMBOL
PARAMETER
MIN
TYP
MAX
UNITS
TEST CONDITIONS
Input Diode
VF
IR
Forward Voltage
Reverse Current
-
-
-
-
1.7
V
IF = 20 mA
VR = 2.0 V
100
µA
Output Photologic® Sensor
VCC Operaꢁng D.C. Supply Voltage
4.75
-
5.25
V
-
Low Level Supply Current:
Totem Pole & Open-Collector
-
-
-
-
15
15
mA
mA
VCC = 5.25, IF = 0 mA(1)
VCC = 5.25, IF = 15 mA
ICCL
Inverted Totem-Pole &
Inverted Open-Collector
High Level Supply Current:
Totem Pole & Open-Collector
-
-
-
-
15
15
mA
mA
VCC = 5.25, IF = 15 mA
VCC = 5.25, IF = 0 mA(1)
ICCH
VOL
VOH
Inverted Totem-Pole &
Inverted Open-Collector
Low Level Output Voltage:
VCC = 4.75, IOL = 12.8 mA, IF = 0 mA
Totem Pole & Open-Collector
-
-
-
-
-
0.4
0.4
-
V
V
V
(1)
Inverted Totem-Pole &
Inverted Open-Collector
VCC = 4.75, IOL = 12.8 mA, IF = 15 mA
High Level Output Voltage:
2.4
VCC = 4.75, IOH = -800 µA, IF = 15 mA
Totem-Pole & Open-Collector
VCC = 4.75, IOH = -800 µA, IF = 0 mA
(1)
Inverted Totem-Pole &
Inverted Open-Collector
2.4
-
-
V
High Level Output Current:
VCC = 4.75, VOH = 30 V, IF = 15 mA,
VCC = 4.75, VOH = 30 V, IF = 0 mA(1)
Totem Pole & Open-Collector
-
-
-
-
100
100
µA
µA
IOH
Inverted Totem-Pole &
Inverted Open-Collector
IF(+)
LED Posiꢁve-Going Threshold Current
-
-
-
15
mA
V
VCC = 5.0 V
VCC = 5.0 V
IF(+), IF(-) Hysteresis
2.0
-
Short Circuit Output Current:
VCC = 5.25 V, IF = 15 mA, Output =
GND
VCC = 5.25 V, IF = 0 mA(1), Output =
GND
Totem Pole & Open-Collector
-15
-15
-
-
-60
-60
mA
mA
IOS
Inverted Totem-Pole &
Inverted Open-Collector
General Note
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
www.optekinc.com | www.ꢀelectronics.com
Issue B 10/2016 Page 4
© TT electronics plc
Electrical Characterisꢀcs (TA = 25° C unless otherwise noted)
SYMBOL
trtr
PARAMETER
MIN
TYP
70
MAX
UNITS
ns
TEST CONDITIONS
VCC = 5 V, IF = 0 or 15 mA
RL = 8TTL loads (Totem Pole)
RL = 360 Ω (Open-Collector)
Output Rise Time, Output Fall Time
Propagaꢁon Delay Low-High
Propagaꢁon Delay High-Low
-
-
-
-
-
-
TPLH
5.0
5.0
µs
TPHL
µs
Notes:
(1) Normal applicaꢁon would be with light source blocked, simulated by IF = 0 mA.
(2) All parameters are tested using pulse techniques.
General Note
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
www.optekinc.com | www.ꢀelectronics.com
Issue B 10/2016 Page 5
© TT electronics plc
OPB930_11, OPB940_11 - Flag Next to Emitter
OPB930_11, OPB940_11 - Flag Next to Sensor
1.20
1.00
0.80
0.60
0.40
0.20
0.00
1.20
1.00
0.80
0.60
0.40
0.20
0.00
Right to Left
Right to Left
Right to Left (back)
Right to Left (back)
Top to Bottom
Bottom to Top
Top to Bottom
Bottom to Top
Left to Right
Left to Right
Left to Right (back)
Left to Right (back)
0.00
0.05
0.10
0.15
0.20
0.25
0.00
0.05
0.10
0.15
0.20
0.25
Displacement Distance (inches)
Displacement Distance (inches)
OPB930_11, OPB940_11 - Flag in Middle of Slot
1.20
1.00
0.80
0.60
0.40
0.20
0.00
Right to Left
Right to Left (back)
Top to Bottom
0
Top to Bottom
Bottom to Top
Left to Right
Left to Right (back)
Emitter
Left to Right
Right to Left
Sensor
0
Width
0.00
0.05
0.10
0.15
0.20
0.25
Displacement Distance (inches)
General Note
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
www.optekinc.com | www.ꢀelectronics.com
Issue B 10/2016 Page 6
© TT electronics plc
OPB930_51, OPB940_51 - Flag Next to Sensor
OPB930_51, OPB940_51 - Flag Next to Emitter
1.20
1.00
0.80
0.60
0.40
0.20
0.00
1.20
1.00
0.80
0.60
0.40
0.20
0.00
Right to Left
Right to Left
Right to Left (back)
Right to Left (back)
Top to Bottom
Bottom to Top
Top to Bottom
Bottom to Top
Left to Right
Left to Right
Left to Right (back)
Left to Right (back)
0.00
0.05
0.10
0.15
0.20
0.25
0.00
0.05
0.10
0.15
0.20
0.25
Displacement Distance (inches)
Displacement Distance (inches)
OPB930_51, OPB940_51 - Flag in Middle of Slot
1.20
1.00
0.80
0.60
0.40
0.20
0.00
Right to Left
Right to Left (back)
Top to Bottom
0
Top to Bottom
Bottom to Top
Left to Right
Emitter
Left to Right (back)
Left to Right
Right to Left
Sensor
0
Width
0.00
0.05
0.10
0.15
0.20
0.25
Displacement Distance (inches)
General Note
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
www.optekinc.com | www.ꢀelectronics.com
Issue B 10/2016 Page 7
© TT electronics plc
OPB930_55, OPB940_55 - Flag Next to Sensor
OPB930_55, OPB940_55 - Flag Next to Emitter
1.20
1.00
0.80
0.60
0.40
0.20
0.00
1.20
1.00
0.80
0.60
0.40
0.20
0.00
Right to Left
Right to Left
Right to Left (back)
Right to Left (back)
Top to Bottom
Bottom to Top
Top to Bottom
Bottom to Top
Left to Right
Left to Right
Left to Right (back)
Left to Right (back)
0.00
0.05
0.10
0.15
0.20
0.25
0.00
0.05
0.10
0.15
0.20
0.25
Displacement Distance (inches)
Displacement Distance (inches)
OPB930_55, OPB940_55 - Flag in Middle of Slot
1.20
1.00
0.80
0.60
0.40
0.20
0.00
Right to Left
Right to Left (back)
Top to Bottom
0
Top to Bottom
Bottom to Top
Left to Right
Left to Right (back)
Emitter
Left to Right
Right to Left
Sensor
0
Width
0.00
0.05
0.10
0.15
0.20
0.25
Displacement Distance (inches)
General Note
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
www.optekinc.com | www.ꢀelectronics.com
Issue B 10/2016 Page 8
© TT electronics plc
Issue
Change Descripꢁon
Approval
Date
Iniꢁal Issue (2 unnumbered PDFs - 1 for L series, 1 for W series)
Revised and put into new template. Required changes on all pages.
Updated table on page 4 with proper informaꢁon
Updated table on page 4 with proper nomenclature Icch, Vol, Voh
Added Polysulfone cauꢁon informaꢁon
July 1996
12/21/05
5/16/07
7/22/07
02/20/08
10/7/2016
A
Steve Coble
Steve Coble
Bob Procsal
Bob Procsal
L. Timpa
A.1
A.2
A.3
B
Transferred to the new TT Electronics template
General Note
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
www.optekinc.com | www.ꢀelectronics.com
Issue B 10/2016 Page 9
© TT electronics plc
相关型号:
©2020 ICPDF网 联系我们和版权申明