OPB951 [TTELEC]
Dual Channel Encoder;型号: | OPB951 |
厂家: | TT Electronics |
描述: | Dual Channel Encoder |
文件: | 总6页 (文件大小:976K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Photologic® Dual Channel
Encoder
OPB950Z, OPB951
Features:
Dual channel outputs for Quadrature Output
Open collector inverter outputs
0.010” (0.254 mm) sensor apertures for high resoluꢁon
Snap mount
Package 1
Package 2
OPB950 5±.0.5 Volt Vcc, OPB951 4.75 to 16 Volt Vcc
RoHS
Descripꢀon:
Each OPB950, series devices consists of an infrared Light Emiꢂng Diode (LED) and a monolithic integrated circuit which
incorporates two independent photodiodes, linear amplifiers, Schmiꢀ trigger circuits and output transistors. The device is
offered in two versions (see page 2 for package drawings). The OPB950 features a dual open-collector output that is
compaꢁble with TTL/LSTTL and can drive up to 8 TTL loads. The OPB951 brings out the anode of the LED for custom power
applicaꢁons.
Applicaꢁons include linear and rotary encoders with high resoluꢁon provided by internal 0.010” (0.254 mm) apertures
located in front of each Photologic® sensor on 0.040” (1.02 mm) center line spacing.
Custom electrical, wire, cabling and connectors are available. Contact your local representaꢁve or OPTEK for more
informaꢁon.
Applicaꢀons:
Ordering Information
Slot Width /
Lead
Length/
Connector
Mechanical switch replacement
Part
LED Peak
Aperture
Emitter/ Sensor
Speed and direcꢁon indicaꢁon
Mechanical limit indicaꢁon
Rotary encoders
Number Package Wavelength Sensor
Depth
OPB950Z
OPB951
1
2
Dual TTL
Dual TTL
Molex 5102
890 nm
0.200" / 0.350”
0.05” / 0.01"
Edge sensing
Sliding Door Automoꢁve and
Liꢃgate applicaꢁons
OPB950Z
OPB951
5-LED
4-Vcc
4-Vcc
VREG
VREG
3-Out B
3-Out B
AMP
AMP
AMP
AMP
2-Out A
1-GND
2-Out A
1-GND
General Note
TT Electronics | Optek Technology, Inc.
1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
www.ꢀelectronics.com | sensors@ꢀelectronics.com
Issue A 11/2016 Page 1
© TT electronics plc
Photologic® Dual Channel
Encoder
OPB950Z, OPB951
Electrical Specificaꢀons
Absolute Maximum Raꢀngs (TA=25°C unless otherwise noted)
Storage & Operaꢁng Temperature Range
Input Diode
-40°C to +85° C
Forward DC Current
50 mA
2.0 V
Reverse DC Voltage
Power Dissipaꢁon(1)
100 mW
Output Photologic®
Supply Voltage, VCC
OPB950Z / OPB951
5.5 V / 16 V
16 V
Voltage at Output
Power Dissipaꢁon(2)
200 mW
40 mA
Sinking Output Current
Electrical Characterisꢀcs (TA = 25°C and Vcc = +5 Volts unless otherwise noted )
SYMBOL
PARAMETER
MIN
TYP
MAX
UNITS
TEST CONDITIONS
Input LED OPB951 (see op240 for addiꢁonal informaꢁon)
VF
IR
Forward Voltage
-
-
-
-
-
1.80
100
-
V
IF = 20 mA
VR= 2.0 V
IF = 10 mA
Reverse Current
µA
nm
λP
Wavelength at Peak Emission
890
Output Photologic® Sensor (see OPL583 for addiꢁonal informaꢁon)
SYMBOL
PARAMETER
Operaꢁng Supply Voltage(4)
Hysteresis Raꢁo
MIN
4.5
TYP
-
MAX
16
UNITS
TEST CONDITIONS
VCC
V
-
-
(+)
(-)
EET
E
/
1.1
1.5
2
-
ET
Channel Match
MATCH
ICCL
0.67
1
1.5
12
6
-
-
(+ B)
EET(+ A) / EET
Supply Current, Both Outputs Low
(LED On, No Target)
-
-
-
8.5
3.5
6
mA
mA
mA
EE = 0.5 mW/cm2 (no load on output)
EE = 0 mW/cm2 (no load on output)
EE = 0 mW/cm2 and 0.5 mW/cm2
Supply Current, Both Outputs High
(LED Off)
ICCH
Supply Current, Mixed Output States
(one high, one low)
ICCM
-
Ioh
High Level Output Current
Low Level Output Voltage
-
-
1
30
µA
V
EE = 0 mW/cm2 , VOH = 16 V
VOL
0.21
0.4
EE = 0 mW/cm2 , IOL = 12.8 mA
Propagaꢁon Delay
Output High to Low
Output Low to HIgh
VCC = 5 V, RL = 360 Ω
TPHL
TPLH
2
10
µs
µs
-
-
-
EE = 0 or 0.5 mW/cm2 , f = 10 kHz, D.C. =
50%
tr
Output Rise Time
Output Fall Time
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
20
15
ns
ns
-
-
tf
TT Electronics | Optek Technology, Inc.
1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200
www.ꢀelectronics.com | sensors@ꢀelectronics.com
Issue A 11/2016 Page 2
© TT electronics plc
Photologic® Dual Channel
Encoder
OPB950Z, OPB951
Performance
High Level Output vs Ambient Temperature
Low Level Output vs Ambient Temperature
25
20
15
10
5
0.5
0.4
0.3
0.2
0.1
0
VCC = 4.5 V
VOH = 18 V
EE = 0
mW/cm2
VCC = 4.5 V
IOL = 12.8 mA
λ = 890 nm
EE = 0.5 mW/cm2
VOL
IOH
0
-50
-25
0
25
50
75
100
-50
-25
0
25
50
75
100
TA - Ambient Temperature (°C)
TA - Ambient Temperature (°C)
Supply Current vs Ambient Temperature
33
VCC = 5 V
31
29
27
25
23
21
19
No Load on Output
λ = 890 nm
ICCL
ICCH
0
-50
-25
0
25
50
75
100
TA - Ambient Temperature (°C)
General Note
TT Electronics | Optek Technology, Inc.
1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
www.ꢀelectronics.com | sensors@ꢀelectronics.com
Issue A 11/2016 Page 3
© TT electronics plc
Photologic® Dual Channel
Encoder
OPB950Z, OPB951
Performance
Rise and Fall Time vs Ambient Temperature
vs Output Load
Propagation Delay vs Ambient Temperature
250
200
150
100
50
20
15
10
5
Amplitude = 0.5 mW/cm2
VCC = 5 V
VCC = 5 V
λ = 890 nm
f = 10 kHz
tr, RL = 2 K
Ώ
RL = 360 Ώ
λ = 890 nm
f = 10 kHz
Duty Cycle = 50%
Amplitude = 0.5 mW/cm2
tr, RL = 1 K
Ώ
tPHL
tPLH
tr, RL = 360 Ώ
t, R= 360 Ώ, 1 k Ώ, 2 kΏ
50 75 100
0
0
-50
-25
0
25
-50
-25
0
25
50
75
100
TA - Ambient Temperature (°C)
TA - Ambient Temperature (°C)
Ideal Target Size & Spacing
For Linear or Circular Targets
Sensor Output(s)
0.070 [1.78]
0.090 [2.27]
1
1
1
0
0
0
0
1
1
1
1
0
0
0
1
Ch-A
Ch-B
0
0.150 [3.81]
Dimensions are in inches [millimeters]
Please consult OPTEK for target design and
sensor location relative to the target.
General Note
TT Electronics | Optek Technology, Inc.
1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
www.ꢀelectronics.com | sensors@ꢀelectronics.com
Issue A 11/2016 Page 4
© TT electronics plc
Photologic® Dual Channel
Encoder
OPB950Z, OPB951
Packaging
Package 1 - OPB950Z
Mates with Molex 22-01-1042
and terminal # 08-70-0069
Pin # Description
1
2
3
4
Ground
Output-A
Output-B
VCC
Package 2 - OPB951
Pin # Description
1
2
3
4
Output-A
Output-B
VCC
Ground
General Note
TT Electronics | Optek Technology, Inc.
1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
www.ꢀelectronics.com | sensors@ꢀelectronics.com
Issue A 11/2016 Page 5
© TT electronics plc
Photologic® Dual Channel
Encoder
OPB950Z, OPB951
Issue
Change Descripꢁon
Approval
Date
A
Initial Release
Tom Osborne
Tom Osborne
2/03/06
A.1
A.2
Minor changes to the first paragraph on page 1
Added OPB951
3/29/06
1/10/07
General Note
TT Electronics | Optek Technology, Inc.
1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200
www.ꢀelectronics.com | sensors@ꢀelectronics.com
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
Issue A 11/2016 Page 6
© TT electronics plc
相关型号:
©2020 ICPDF网 联系我们和版权申明