OPIA815 [TTELEC]
DIP Package;OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
DIP Package
Features:
•
•
•
•
5,000 Vrms electrical isolation
Choice of a Single and Dual LED
Phototransistor or Photodarlington Sensor
Low-cost plastic Dual-In-Line (DIP) package
Approval Agency:
•
•
UL Certification No: E58730
VDE No: 40026625 40026536, 40026654
Description:
The OPIA series optocouplers are designed for applications that use an analog output (Phototransistor or
Photodarlington) in a dual-in-line package. A wide selection of configurations are available. With typical isolation
voltage of 5,000 Volts(RMS), these products meet typical power system isolation requirements.
Theory of operation: The LED transmitter is used to illuminate the Photosensor providing electrical isolation
between two power systems while maintaining the ability to transmit information from one power system to the
other. In many applications, analog signal levels may be required to be transmitted between two power systems
while maintaining isolation between the power systems up to 5,000 volts(RMS). A variety of LED and photosensor
configurations are available depending on the system requirements.
The ratio Current Transfer Ratio (CTR) is determined by using the output current and input current for analog
photosensors. CTR ratios can range from as low as 5 to over 9,000 depending on the device.
Photosenso
r − Current
20 mA
10 mA
CTR =
=
* 100 = 200
LED − Current
All DIP product is shipped in a shipping tube with “TU” identified on the end of the part number.
Example: OPIA817DTUE is a 4-Pin DIP shipped in a tube (TU).
Applications:
• High voltage isolation: 5,000 Volts RMS
• PCBoard power system isolation
• Industrial equipment power isolation
• Medical equipment power isolation
• Office equipment
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
RoHS
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Issue A.5
8/09
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Page 1 of 17
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
DIP Package
Package Outline Dimensions and Schematics: Top-View
Pin #
Part Number
1
2
3
4
OPIA817
OPIA814
OPIA815
OPIA4010
OPIA1210
A
A-K
A
K
K-A
K
E
E
E
E
E
C
C
C
C
C
A
K
A
K
Analog Output Devices Ordering Information
Isolation Voltage
Max. (Vrms)
CTR
Min/Typ/Max
Typ. Tr / Tf (µs)
RL = 100 ohms
Part Number
Package
Configuration
OPIA817D
OPIA814D
OPIA815D
OPIA4010D
OPIA1210D
5,000
5,000
5,000
5,000
5,000
50 / - / 600
60 / - / 600
70 / - / -
4 / 3
5 / 4
4-Pin DIP
4-Pin DIP
4-Pin DIP
4-Pin DIP
4-Pin DIP
A K—C E
A K, K A—C E
A K—C E (Dar)
A K—C E (Dar)
A K—C E
80 / 72
60 / 50
2 / 3
600 / - / 9,000
50 / - / 600
Configuration: Definition of Terms
LED Identification—Sensor Identification
Configuration
Information
LED
A = Anode
B = Base
K = Cathode
C = Collector
Sensor
E = Emitter
(Dar) = Photodarlington
Packaging
Part Number Suffix: TU = Shipped in Tubes
Example:
OPIA817DTUE
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.5
Page 2 of 17
8/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
DIP Package
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage Temperature
-55° C to +125° C
-30° C to +100° C
Operating Temperature
Isolation voltage (1 minute)
Total Package Power Dissipation
5,000 Vrms
200 mW
260° C
Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron)
Input Diode
Continuous Forward Current
50 mA
1 A
Peak Forward current (1 µs pulse width, 300 pps)
Reverse Voltage
OPIA817, OPIA815, OPIA4010, OPIA1210
OPIA814, OPIA4010
6 V
-
Power Dissipation
70 mW
Output Phototransistor
Collector-Emitter Voltage
OPIA817, OPIA814
OPIA4010
60 V
300 V
35 V
OPIA815
OPIA1210
350 V
Emitter-Collector Voltage
OPIA817, OPIA814, OPIA815
OPIA4010
6 V
0.1 V
7 V
OPIA1210
Collector Current
OPIA817, OPIA814, OPIA1210
OPIA4010
50 mA
150 mA
80 mA
OPIA815
Power Dissipation
All except the part numbers noted below
OPIA4010
150 mW
200 mW
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.5
8/09
Page 3 of 17
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
DIP Package
Electrical Characteristics
SYMBOL
PARAMETER
MIN
TYP MAX UNITS
TEST CONDITIONS
Input Diode
Forward Voltage
VF
All except those noted below
OPIA1210
-
1.2
1.2
1.4
1.3
IF = 20 mA
IF = 10 mA
V
V
1.0
Peek Forward Voltage
OPIA814, OPIA4010
OPIA1210
VFM
-
-
-
-
3.5
3.0
I
FM = 500 mA
Reverse Current
All except those noted below
OPIA814
-
-
-
-
-
-
10
-
10
VR = 4 V
-
VR = 5 V
IR
µA
pf
OPIA1210
Terminal Capacitance
All except those noted below
OPIA815
Ct
-
-
30
30
-
V = 0.0 V, f = 1K Hz
V = 0.0 V, f = 1K Hz
250
Output Phototransistor
Collector Dark Current
ICEO
OPIA817, OPIA814
OPIA1210
-
-
-
10
100
200
IF = 0 mA, VCE = 20 V
IF = 0 mA, VCE = 300 V
nA
V
Collector-Emitter Saturation Voltage
OPIA817
OPIA814
OPIA1210
-
-
-
0.1
0.1
-
0.2
0.3
0.4
IF = 20 mA, IC = 1 mA
IF = 20 mA, IC = 1 mA
IF = 8 mA, IC = 2.4 mA
VCE(SAT)
Cutt-Off Frequency
fC
All except those noted below
OPIA817, OPIA814, OPIA1210
-
-
-
80
-
-
K Hz
µs
V
CC = 5 V, IC = 2 mA, RL = 100 Ω
Rise Time
OPIA817
OPIA814
OPIA1210
VCC = 2 V, IC = 2 mA, RL = 100 Ω
VCC = 2 V, IC = 2 mA, RL = 100 Ω
VCC = 10 V, IC = 2 mA, RL = 100 Ω
-
-
-
4
5
2
18
20
-
tR
Fall Time
OPIA817D
OPIA814
OPIA1210
VCC = 2 V, IC = 2 mA, RL = 100 Ω
VCC = 2 V, IC = 2 mA, RL = 100 Ω
VCC = 10 V, IC = 2 mA, RL = 100 Ω
-
-
-
3
4
3
18
20
-
tF
µs
Continued on Next Page
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.5
Page 4 of 17
8/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
DIP Package
Electrical Characteristics - Continued from Previous Page
SYMBOL
PARAMETER
MIN
TYP MAX UNITS
TEST CONDITIONS
Output PhotoDarlington
Collector Dark Current
OPIA4010
OPIA815
ICEO
-
-
-
-
1.0
1.0
IF = 0 mA, VCE = 200 V
IF = 0 mA, VCE = 10 V
µA
V
Collector-Emitter Saturation Voltage
VCE(SAT) OPIA815
OPIA4010
-
-
0.8
-
1.0
1.5
IF = 20 mA, IC = 5 mA
IF = 20 mA, IC = 5 mA
Cut-Off frequency
OPIA815
OPIA4010
fC
1.0
-
6.0
7.0
-
-
VCC = 2 V, IC = 20 mA, RL = 100 Ω
VCC = 5 V, IC = 2 mA, RL = 100 Ω
K Hz
Rise Time
OPIA815
OPIA4010
tr
-
-
80
60
300
300
VCC = 2 V, IC = 20 mA, RL = 100 Ω
VCC = 2 V, IC = 20 mA, RL = 100 Ω
µs
µs
Fall Time
OPIA815
OPIA4010
tf
-
-
72
50
250
250
VCC = 2 V, IC = 20 mA, RL = 100 Ω
VCC = 2 V, IC = 20 mA, RL = 100 Ω
Coupled Characteristics
Current Transfer Ratio
OPIA817, OPIA1210
OPIA814
OPIA815
50
60
70
-
-
-
-
600
600
-
IF = 5.00 mA, VCE = 5.0 V
IF = 1.00 mA, VCE = 2.0 V
IF = 0.05 mA, VCE = 3.3 V
IF = 1.00 mA, VCE = 2.0 V
CTR
%
OPIA4010
600
9,000
Cf
Floating Capacitance
Isolation Resistance
-
0.6
1.0
-
pF
V = 0.0 V, f = 1M Hz
RISO
5X1010 1011
ohm C500V, 40% to 60%RH
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.5
8/09
Page 5 of 17
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
DIP Package
OPIA817
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.5
Page 6 of 17
8/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
DIP Package
OPIA817
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.5
8/09
Page 7 of 17
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
DIP Package
OPIA814
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.5
Page 8 of 17
8/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
DIP Package
OPIA814
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.5
8/09
Page 9 of 17
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
DIP Package
OPIA815
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.5
Page 10 of 17
8/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
DIP Package
OPIA815
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.5
8/09
Page 11 of 17
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
DIP Package
OPI412
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.5
Page 12 of 17
8/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
DIP Package
OPI412
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.5
8/09
Page 13 of 17
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
DIP Package
OPIA1210
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.5
Page 14 of 17
8/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
DIP Package
OPIA1210
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.5
8/09
Page 15 of 17
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
DIP Package
Quality / Reliability Requirements
Parameter
Conditions
11 samples after 500Hrs
@ VCE = 5.0VDC, Ta = 70°C
50 samples after 96Hrs
Failure Criteria
± 10%
HTRB D IC(OFF)
0 Fail
± 10%
HTFB D IC(ON)
0 Fail
@ Max PD, Ta = 25°C
MTTF @ 90% confidence
Moisture Sensitivity Level
Lead Solderability
150,000 Min.
MSL 1
@ 25°C, 25mADC
per JDEC stnd J-STD-020B
per Method 208 of MIL-STD-202.
DSC test method
0 Fail
Glass Transition of body
Temperature Humidity-Bias
Temperature Cycle
125°C Min.
± 20%
85°C, 85%RH, 500Hrs, 80% min Iceo
per Method 1010.7 of MIL-STD-883E
85°C, 500Hrs
± 20%
High Temperature Storage
± 20%
TA = 121°C, Pressure = 15psi, Humidity
= 100%, Time = 96Hrs
Autoclave
0 Fail
Note: This is to be performed when a change occurs to form, fit or function.
Government and Industry Standard
Compliance Requirements
European Union’s Reduction of Hazardous Substances (RoHS) Directive 2002/95/EC
Label Identification
DESCRIPTION:
Carrollton, TX, USA
MADE IN TAIWAN
OPTEK P/N __OPIA817D-TU__
Size: 3” (7.4 cm) X 2.2” (5.5 cm)
Lettering shall be black on white background.
Format shall be as:
IIIIIIIIIIIIIIIIIIIII
QTY. ________N/A_________
Notes:
1. The DATE CODE is a 4-digit code for date of manufacture where YY is
the last two digits of the year, and WW is week number of
manufacture.
2. The LOT I.D. is the manufacturing location lot identification where Y is
the year of manufacture, NNNN is a sequential lot identifier, and DDD
is the day of the year of manufacture. – or use equivalent label format.
IIIIIIIIIIIIIIIIIIIII
DATE CODE _____(YYWW)___
IIIIIIIIIIIIIIIIIIIII
LOT I.D. ____(Y-NNNNDDD)__
IIIIIIIIIIIIIIIIIIIII
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.5
Page 16 of 17
8/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA814, OPIA815, OPIA817
OPIA1210, OPIA4010
DIP Package
Packaging Information:
Tube Packaging Specifications (TU):
DIMENSIONS ARE IN: INCHES [MILLIMETERS]
Quantity: 4-pin: 100pcs/tube
TOLERANCE: ± 0.008 INCHES
[± 0.2 MILLIMETERS]
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.5
8/09
Page 17 of 17
相关型号:
©2020 ICPDF网 联系我们和版权申明