OSSRD2001D [TTELEC]
Solid State Relays;型号: | OSSRD2001D |
厂家: | TT Electronics |
描述: | Solid State Relays 输出元件 光电 |
文件: | 总12页 (文件大小:475K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
Features:
•
•
•
•
•
•
•
Molded Epoxy package
Zero crossing circuit
High Input/output Optical Isolation 4k Vrms
Small size and light weight
Can be installed directly on the P.C. board
Fast switching time
Non-contact switch
Approval Agency:
•
UL Certification No: E321810
Description:
The OSSR Solid State Relay series are electronic controlled switches, they contain no moving parts.
When voltage is applied to the input, a Light Emitting Diode or LED illuminates a Photosensor which
controls the internal output circuit. The output circuit is utilized to drive high current loads. The input
and output are optically isolated. The OSSR series incorporates a zero crossing circuit which minimizes
current and noise surges due to resistive and inductive loads. Optek provides three different electrical
configurations of the OSSR series: DC input – AC output, AC input – AC output and DC input – DC
output. These configurations meet most industry applications.
The OSSRD2001D and OSSRD2002A are offered in a standard 4-pin SIP, Single In-Line Package, for
PCB mounting applications. The package offers a light weight, compact and robust molded epoxy body
with extended operating temperature range of up to 100°C.
The OSSRD2001D input circuit features a DC range from 4 to 24 VDC. The output consists of a photo
darlington circuit featuring a load current rating of 3 Amps and a maximum load voltage of 100VDC and
30 Watts with normally open output.
The OSSRD2002A input circuit features a DC range from 4 to 32 VDC. The output consists of a Triac
circuit featuring a load current rating of 3 to 40 Amps and a maximum load voltage of 250VAC with
normally open output.
Applications:
•
•
•
•
•
•
•
•
•
•
Temperature controlled systems
Office equipment
Motor controls
Industrial Equipment
Light controls systems
Heater control
Appliances
HVAC temperature control
Plastic molding
Packaging industry
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.3 11/09
Page 1 of 12
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
Package Outline Dimensions: 4-Pin SIP
Tolerance: 0.2mm [millimeters]
All dimensions in Inches [millimeters]
Schematic: Top View
+
-
+
-
+
-
+
-
LOAD
INPUT
LOAD
INPUT
OSSRD2002A
OSSRD2001D
Pin Configuration:
Pin #
Part Number
1
A
A
2
K
K
3
C
4
OSSRD2001D
OSSRD2002A
E (Dar.)
A2 (-)
A1 (+)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3
11/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Page 2 of 12
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
VDC Input with VDC/VAC Output Devices Ordering Information
Br. Vol.
Min. Tgr Max. Output Min. Ouput
Output
Type
Part Number
Input
Max. Vout Min. Vout
Configuration
Current Ift Current
Current
Input to
Output
OSSRD2001D 4-24VDC
OSSRD2002A 4-32VDC
100mA
50mA
3A
3A
0.05A
0.05A
100VDC
250VAC
-
DC
AC
4000VAC
A K—C E (Darl.)
A K—A1(+) A2(-)
50VAC
4000VAC
Configuration: Definition of Terms
LED Identification—Sensor Identification
LED
Sensor
A = Anode
K = Cathode
E = Emitter
Configuration
Information
C = Collector
A1(+) and A2(-) = Main Terminals of Triac
Part Number Symbolization
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.3 11/09
Page 3 of 12
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage Temperature
OSSRD2001D, OSSRD2002A
-30° C to +125° C
-30° C to +100° C
4,000 Vrms
Operating Temperature
OSSRD2001D, OSSRD2002A
Isolation Voltage (Input to Output)
OSSRD2001D, OSSRD2002A
Soldering Temperature 10 sec.
OSSRD2001D, OSSRD2002A
260° C
Input Diode
Input Signal Voltage—(VIN)
OSSRD2001D
OSSRD2002A
4—24 VDC
4—32 VDC
Drop-out Voltage—(Vdo)
OSSRD2001D, OSSRD2002A
1 VDC
30 W
Output Power Dissipation—(Pc)
OSSRD2001D
Output Triac
RMS On-State Current - (IT)
OSSRD2002A
3 Arms
Peak One Cycle Surge Current - (I surge)
OSSRD2001D @ 50µS
OSSRD2002A @ 8.3ms
9 A
30 A
Repetitive Peak-Off State Voltage—(VDRM
)
OSSRD2002A
600 V
47—70 Hz
50 A/µS
Operating Frequency—(f)
OSSRD2002A
Critical Rate of Rise of On-State Current—(di/dt)
OSSRD2002A
Load Supply Voltage—(VOUT
)
OSSRD2002A
250 Vrms AC
Output Photo Darlington
Collector Voltage - (VCEO
)
OSSRD2001D
100 VDC
3 A
Output Current - (Io)
OSSRD2001D
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3
Page 4 of 12
11/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
Electrical Characteristics (TA = 25o C unless otherwise noted)
SYMBOL
PARAMETER
MIN
TYP MAX UNITS
TEST CONDITIONS
Input Diode
Pick-up Voltage
OSSRD2001D, OSSRD2002A
VPU
-
-
4
VDC IT = 1Arms
Input Current
OSSRD2001D
OSSRD2002A
IIN
-
5
-
-
25
12
mA
pF
VIN= 4 - 24 V
VIN= 4 - 32 V
Terminal Capacitance
OSSRD2001D
CT
-
30
-
V=0, f=1kHz
Output Triac
On-State Voltage
OSSRD2002A
VT
IOP
-
-
1.5
Vrms IT = 1Arms
Operating Current
OSSRD2002A
50
-
-
-
-
7
-
mArms Vout = 240Vrms
mArms Vout = 240Vrms
Leakage Current
OSSRD2002A
ILEAK
dv/dt
-
Critical Rate of Rise of Off-State Voltage
OSSRD2002A
50
200
V/µs
See Note 1.
Zero-Cross Voltage
OSSRD2002A
-
Yes
-
-
-
-
Load Voltage Rating
OSSRD2002A
VOUT
50
280
VAC
IT = 50mArms MIN
Minimum Trigger Current
OSSRD2002A
IFT
10
25
mA
-
10^10
-
-
-
-
VDRM = 600 V
Isolation resistance Input to Output
OSSRD2002A
Riso
TON
-
DC500 V
60Hz AC
Ω
Turn-on Time
OSSRD2002A
8.3
mS
Turn-off Time
OSSRD2002A
TOFF
-
-
-
8.3
-
mS
60Hz AC
Rth (j-C) l Thermal Resistance (between junction and case)
1.3
°C/W
−
Note1: Output (dv/dt) protection is provided in all models, and they are designed to switch resistive or inductive loads to 0.2 factor. The dv/dt rating is based on
source impedance of 50 ohms.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.3 11/09
Page 5 of 12
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
Electrical Characteristics (TA = 25o C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Output Photodiode
Collector-Emitter Breakdown Voltage
OSSRD0001D
BVCEO
ILEAK
IC
100
-
-
-
1.5
3
Vrms IF = 0mA
Output LeakCurrent
OSSRD0001D
-
µA
A
IF = 0mA, V=100V
IF = 1mA, VCE=2V
IF = 20mA, IC=100mA
DC500 V
Collector Current
OSSRD0001D
0.05
-
-
Yes
-
Collector-Emitter Saturation Voltage
OSSRD0001D
VCE(sat)
-
-
Isolation Resistance
OSSRD0001D
Riso
1010
-
Ω
Floating Capacitance
OSSRD0001D
Cr
fc
tf
-
2
-
-
-
-
-
3
-
pF
Hz
µS
µS
V=0, f=1MHz
Cut-Off Frequency
OSSRD0001D
VCE = 2V, IC=200mA,
RL=200mA
Response Time (Rise)
OSSRD0001D
VCE = 2V, IC=20mA,
RL=200mA
500
200
Response Time (Fall)
OSSRD0001D
VCE = 2V, IC=20mA,
RL=200mA
tr
-
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3
Page 6 of 12
11/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
OSSRD2001D
Characteristic Data Curves
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Issue A.3 11/09
Page 7 of 12
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
OSSRD2002A
Characteristic Data Curves
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3
11/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Page 8 of 12
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
Quality and Reliability Requirements
Parameter
Failure Criteria
Test Conditions
Room Temperature Operating Life
(for light emitting diodes only)
TA = 25°C, IF = 60mA or max. rated,
Time = 1000 hours
± 20%
JEDEC, Method A101-B
TA = 85°C, Humidity = 85%RH,
Time = 1000 hours
High Humidity, High Temperature
Reverse Bias
± 20%
± 20%
JEDEC, Method A108-A
TA = 70°C, IF = 20mA, Time = 1000 hours
High Temperature Forward Bias
TA = 121°C, Pressure = 15psi,
Humidity = 100%
Autoclave
0 Fail
0 Fail
JEDEC (J-STD-020) /
MIL-STD-883E, Method 2003.7
IR Reflow / Solderability Test
MTTF @ 90% confidence
Moisture Sensitivity Level
Glass Transition of body
Temperature Humidity-Bias
Temperature Cycle
150,000 Min.
MSL 1
@ 25°C, 25mADC
per JDEC stnd J-STD-020B
DSC test method
125°C Min.
± 20%
85°C, 85%RH, 500Hrs, 80% min Iceo
per Method 1010.7 of MIL-STD-883E
85°C, 500Hrs
± 20%
High Temperature Storage
± 20%
Label Identification:
DESCRIPTION:
Size: 3” (7.4 cm) X 2.2” (5.5 cm)
Lettering shall be black on white background.
Format shall be as:
Notes:
1. The DATE CODE is a 4-digit code for date of manufacture where YY is
the last two digits of the year, and WW is week number of manufacture.
2. The LOT I.D. is the manufacturing location lot identification where Y is
the year of manufacture, NNNN is a sequential lot identifier, and DDD is
the day of the year of manufacture. – or use equivalent label format.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Issue A.3 11/09
Page 9 of 12
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
Packaging Information:
Tray and Carton Packaging Specifications:
Tube Packaging Dimensions
All dimensions in millimeters
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3
Page 10 of 12
11/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
Tray and Carton Packaging Specifications (Cont.):
Carton Packaging Dimensions
Inner Carton
All dimensions in millimeters
Medium Carton
All dimensions in millimeters
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.3 11/09
Page 11 of 12
Solid State Relays
4-Pin SIP Package—VDC Input—VAC/VDC Output
OSSRD2001D and OSSRD2002A
Tray and Carton Packaging Specifications (Cont.):
Carton Packaging Dimensions
Large Carton
All dimensions in millimeters
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3
Page 12 of 12
11/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
相关型号:
©2020 ICPDF网 联系我们和版权申明