SPP2UL6R80JLF

更新时间:2024-09-18 22:12:29
品牌:TTELEC
描述:Fibre Core Conformal Coated Wirewound Resistor

SPP2UL6R80JLF 概述

Fibre Core Conformal Coated Wirewound Resistor

SPP2UL6R80JLF 数据手册

通过下载SPP2UL6R80JLF数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
Resistors  
Make Possible  
Fibre Core Conformal  
Coated Wirewound Resistor  
SPP Series  
UL1412 recognised fusing *  
Coated or uncoated units  
ꢀ PosiꢁveꢀhighꢀTC’sꢀuponꢀrequest  
ꢀ Colorꢀbandꢀstandardꢀidenꢁꢂcaꢁon  
ꢀ Lowerꢀrangesꢀavailableꢀ-ꢀcontactꢀfactory  
ꢀ Weldableꢀandꢀsolderableꢀmagneꢁcꢀleads  
*ꢀULꢀꢂleꢀnumberꢀE234469  
Electrical Data  
IRC Type  
SPP-1  
SPP-2  
SPP-3  
Resistance - Std.  
0.1to 1200Ω  
1 Ω to 470 Ω  
0.1to 2400Ω  
1 Ω to 470 Ω  
0.1to 2400Ω  
UL Recognised Range  
---  
Tolerance - Std.  
Power Rating  
±±5 ꢀE24ꢁ, ±105 ꢀE12ꢁ  
1 watt @ 8±°C  
3/4 watt @ 10±°C  
1/2 watt @ 12±°C  
Derating to 0 @ 160°C  
2 watt @ 8±°C  
1 watt @ 140°C  
3 watt @ 8±°C  
2 watt @ 14±°C  
1 watt @ 190°C  
---  
---  
---  
Load Life Stability  
1 watt @ 8±°C ± 105  
2 watt @ 8±°C ± 105  
3 watt @ 8±°C ± 105  
Max. Continuous  
Working Voltage  
Min. Insulation  
Resistance  
PR  
PR  
PR  
Dry  
Wet  
10,000 Meg  
100 Meg  
10,000 Meg  
100 Meg  
10,000 Meg  
100 Meg  
Min. Dielectric  
Withstanding Volts  
600V  
600V  
600V  
(RMS)  
Current Noise  
Negligible  
Negligible  
Negligible  
Temperature Rise at  
Approx. 1±0°C  
Approx. 200°C  
Approx. 22±°C  
Rated Load, 25°C Ambient  
±600/°C  
±300/°C  
±600/°C  
±300/°C  
±600/°C  
±300/°C  
1- 2400Ω  
Temperature Coefficient  
0.10- 0.911- 12000.10- 0.911- 24000.10- 0.91Ω  
Notes:  
Unless specified otherwise, standard test centers are 1 ¾ inches.  
General Note  
TT Electronics reserves the right to make changes in product specification without notice or liability.  
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.  
www.ttelectronicsresistors.com  
© TT Electronics plc  
09.14  
Fibre Core Conformal Coated  
Wirewound Resistor  
Make Possible  
SPP Series  
Environmental Data  
Characteristics  
Maximum Limits  
SPP-1  
SPP-2  
SPP-3  
±±00ꢀ/° 0.10- 0.91Ω  
±300ꢀ/° 1.0- 1200Ω  
±±00ꢀ/° 0.10- 0.91Ω  
±300ꢀ/° 1.0- 2400Ω  
Temperature Coefficient (ppm/°C)  
±±00ꢀ/° 0.10- 0.91Ω  
±±00ꢀ/° 1.0- 2400Ω  
Thermal Shock  
±5ꢁ  
Low Shock  
±5ꢁ  
Short Time Overload  
Commercial Short Time Overload  
Resistance to Solder Immersion  
Solderability  
±5ꢁ  
±5ꢁ  
±3ꢁ  
95ꢁ minimum coverage  
±5ꢁ  
Moisture Resistance  
Life Test  
±5ꢁ  
Test Method  
EIA Specification RS-344  
Physical Data  
A
max.  
°
B
1.125  
(28.±)  
min.  
Dimensions (Inches and (mm))  
IRC Type  
A
B
C
ꢀ..0(.ꢀ.ꢁ)  
SPP-1  
SPP-0  
SPP-3  
0.400(10.2) max.  
0.570(14.5) max.  
0.570(14.5) max  
0.148(3.8) max.  
0.170(4.3) max.  
0.170(4.3) max.  
0.032(0.8)  
0.032(0.8)  
0.032(0.8)  
General Note  
TT Electronics reserves the right to make changes in product specification without notice or liability.  
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.  
www.ttelectronicsresistors.com  
© TT Electronics plc  
09.14  
Fibre Core Conformal Coated  
Wirewound Resistor  
Make Possible  
SPP Series  
1ꢁꢁ  
8ꢁ  
3ꢁꢁ  
2ꢁꢁ  
SPP-3  
SPP-2  
SPP-3  
6ꢁ  
SPP-1% 2  
4ꢁ  
2ꢁ  
1ꢁꢁ  
SPP-1  
4ꢁ  
±ꢁ  
1ꢁꢁ 1±ꢁ  
2ꢁꢁ 2±ꢁ 3ꢁꢁ  
Ambient Temperature (°C)  
2ꢁ  
6ꢁ  
8ꢁ  
1ꢁꢁ  
Percent Rated Power  
SPP1 Fusing Characteristic  
(Maximum & Typical Fusing Times)  
SPP Series Pulse Energy Limit  
single or low repetition rate, ΔR <5%)  
100  
10  
1
7
6
5
4
3
2
1
0
Maximum  
Typical  
10  
15  
20  
25  
30  
35  
40  
45  
50  
55  
60  
SPP2  
Initial Power (W)  
SPP1  
Note: After fusing the ohmic value is at least 100 times the initial value, provided  
10  
100  
1000  
10000  
1
initial power ≥ 25W is applied.  
Value (ohms)  
SPP2 Fusing Characteristic  
(Maximum & Typical Fusing Times)  
1.2/50us Peak Voltage Limit  
(10 pulses at 30s intervals, ΔR <5%)  
1000  
100  
10  
7
SPP2  
6
5
4
3
2
1
Maximum  
Typical  
SPP1  
1
10  
15  
20  
25  
30  
35  
40  
45  
50  
55  
60  
0
Initial Power (W)  
1
10  
100  
1000  
10000  
Note: After fusing the ohmic value is at least 100 times the initial value, provided  
initial power ≥ 40W is applied.  
Value (ohms)  
Ordering Procedure  
Example: SPP1UL4700JLF (SPP1, UL recognised, 470 ohms ±5%, Pb-free)  
S
P
P
1
U
L
4
7
0
0
J
4
L
F
1
2
3
5
6
1
2
3
4
5
6
Packing &  
Termination Finish  
Custom  
Code  
Type  
UL Status  
Value  
Tolerance  
SPP1 UL = UL recognised 3 digits + multiplier  
J = ±5%  
Omit for SnPb  
Optional  
SPP2  
K = ±10%  
LF = Pb-free  
R = ohms for values  
<100 ohms  
(SPP1 & SPP2 only,  
SPP3 see Electrical Data for  
applicable values.)  
Standard packing is  
tape & reel, 4000/reel  
General Note  
TT Electronics reserves the right to make changes in product specification without notice or liability.  
All information is subject to TT Electronics’ own data and is considered accurate at time of going to print.  
www.ttelectronicsresistors.com  
© TT Electronics plc  
09.14  

SPP2UL6R80JLF 相关器件

型号 制造商 描述 价格 文档
SPP3 TTELEC Fibre core conformal coated wirewound resistor 获取价格
SPP3052 SYNC-POWER P-Channel Enhancement Mode MOSFET 获取价格
SPP3052T252RG SYNC-POWER P-Channel Enhancement Mode MOSFET 获取价格
SPP3052T252RGB SYNC-POWER P-Channel Enhancement Mode MOSFET 获取价格
SPP3052_11 SYNC-POWER P-Channel Enhancement Mode MOSFET 获取价格
SPP3095 SYNC-POWER P-Channel Enhancement Mode MOSFET 获取价格
SPP3095T252RG SYNC-POWER P-Channel Enhancement Mode MOSFET 获取价格
SPP3095T252RGB SYNC-POWER P-Channel Enhancement Mode MOSFET 获取价格
SPP3095_10 SYNC-POWER P-Channel Enhancement Mode MOSFET 获取价格
SPP30N03 INFINEON SIPMOS Power Transistor 获取价格

SPP2UL6R80JLF 相关文章

  • Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
    2024-09-20
    6
  • Bourns 精密环境传感器产品选型手册(英文版)
    2024-09-20
    9
  • Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
    2024-09-20
    8
  • Bourns GMOV 混合过压保护组件产品选型手册(英文版)
    2024-09-20
    6