VRW25 [TTELEC]
High Voltage Thick Film Resistors; 高压厚膜电阻
| 型号： | VRW25 |
| 厂家： | 
TT Electronics |
| 描述： | High Voltage Thick Film Resistors |
| 文件： | 总3页 (文件大小：80K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
High Voltage
Thick Film Resistors
Welwyn Components
VRW Series
• VRW37 meets the requirements of BS / EN /
IEC 60065
• High working voltage to 3.5kV in compact
size
• High ohmic range to 30M
• High pulse load capability
• Robust flameproof coating material
• RoHS compliant
Electrical Data
VRW25
0.25
VRW37
0.5
Power rating at 70˚ C
Resistance range
watts
(Ohms)
100K to 30M
1600
100K to 10M
3500
Limiting element voltage
Isolation voltage
volts dc or ac peak
volts
ppm/˚ C
%
700
200
TCR
Resistance Tolerance
Standard Values
1, 2, 5
E24 preferred
Thermal Impedance
Ambient temperature range
˚ C/watt
˚ C
140
112
-55 to +155˚ C
Physical Data (Dimensions (mm) & Weight (g)
Type
L
D
Max
f
d
Nom
PCB
mount
Min
bend
Wt.
nom
Max
min
centres
radius
d
D
VRW25
VRW37
6.2
9.0
2.5
3.7
21
0.6
0.8
10.2
0.6
0.3
0.5
L
f
19.6
12.7
1.2
Construction
Terminations
Material:
Resistive thick film material is applied to high-grade ceramic
rods. Tin-plated steel caps are force fitted and the
termination wires are welded to the caps. The value is
obtained by a helical cut in the film and finally the resistor
body is protected by a cement coating applied so that the
terminations remain completely clear.
Hot tin dipped copper wire
Strength:
The terminations meet the requirements
of IEC 68.2.21
Solderability:
The terminations meet the requirements
of IEC 115-1 Clause 4.17.3.2
Marking
Marking
The body protection and marking are resistant to all normal
industrial cleaning solvents suitable for printed circuits.
1% tolerance resistors are colour coded with 5 bands. 2%
and 5% tolerance have 4 bands. IEC62 colours are used.
Flammability
The resistor coating will not burn under any condition of
applied temperature or power overload.
General Note
Welwyn Components reserves the right to make changes in product specification without notice or liability.
All information is subject to Welwyn’s own data and is considered accurate at time of going to print.
A subsidiary of
TT electronics plc
© Welwyn Components Limited · Bedlington, Northumberland NE22 7AA, UK
Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com
Issue D · 01.07
70
High Voltage
Thick Film Resistors
VRWSeries
Welwyn Components
Performance Data
Maximum
Typical
Load at rated voltage (1000hrs at 70˚C)
Derating from rated power at 70˚ C
Overload (10 x 5son,45s offat 6.25xPrnot exceeding 2 x LEV)
Damp heat steady state (56 days, 40˚C, 90% RH)
Climatic sequence
R%
1.5
0.4
zero at 155˚ C
0.15
R%
R%
R%
2
1.5
1.5
0.1
0.2
Climatic category
55/155/56
0.05
Temperature rapid change
R%
R%
0.5
0.5
0.5
Resistance to solder heat
0.05
Vibration
R%
0.05
Voltage Proof
volts
700 min
Pulse Performance
100
VRW25
VRW37
Vmax (kV)
10
1
0.01
0.1
1
10
100
Megaohms
Maximum peak voltage in accordance with “IEC 60065 chapter 14.1”
50 discharges from a 1nF capacitor charged to V max. 12 discharges/minute.
Application Notes
1. Due to operating temperature limits imposed by some PCB materials, derating may be necessary. An
estimate of the temperature rise to be expected at the center of the body can be calculated using the
thermal impedance figures given under Electrical Data.
2. VRW resistors can be supplied with radial, goalpost or lancet pre-formed leads. The VRW37 is also
available in an SMD format with Z formed leads and packed in blister tape. Consult Factory for details.
Packaging
Our standard packaging for VRW is taped and
Figure 1
boxed. The critical dimensions are shown in
Figure 1. The component wires will not
5
mm
protrude beyond the outside edge of the
tapes. Alternative packaging is available by
request. Pre-formed resistors are supplied
loose packed in plastic bags or boxes.
f1
f2
52mm
6
mm
6
mm
Body location f1-f2 1.4mm
© Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK
Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com
IssueB ·01.07
71
High Voltage
Thick Film Resistors
VRW Series
Welwyn Components
Ordering Procedure
Example: VRW25 at 1.2 megohms and 5% tolerance in ammo pack box of 5000 pieces -
Model
VRW25 –
1M2
J
I
Value (use IEC62 code)
Tolerance (use IEC62 code)
JF
1%
G 2%
J
5%
Packing
I
VRW25
VRW37
5000/box
standard
Ammo
2500/box
© Welwyn Components Limited Bedlington, Northumberland NE22 7AA, UK
Telephone: +44 (0) 1670 822181 · Facsimile: +44 (0) 1670 829465 · Email: info@welwyn-tt.com · Website: www.welwyn-tt.com
IssueB·01.07
71
相关型号：
©2020 ICPDF网 联系我们和版权申明