NEO-6M [U-BLOX]
Versatile u-blox 6 GPS modules;型号: | NEO-6M |
厂家: | u-blox AG |
描述: | Versatile u-blox 6 GPS modules 全球定位系统 |
文件: | 总2页 (文件大小:938K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NEO-6 series
Versatile u-blox 6 GPS modules
Highlights
• UART, USB, DDC (I2C compliant) and SPI interfaces
• Available in Crystal and TCXO versions
• Onboard RTC crystal for faster warm and hot starts
• 1.8 V and 3.0 V variants
NEO-6:
12.2 x 16.0 x 2.4 mm
Features
• u-blox 6 position engine:
Product description
o Navigate down to –162 dBm and –148 dBm coldstart
o Faster acquisition with AssistNow Autonomous
o Configurable power management
o Hybrid GPS/SBAS engine (WAAS, EGNOS, MSAS)
o Anti-jamming technology
The NEO-6 module series brings the high performance of the
u-blox6 position engine to the miniature NEO form factor.
u-blox6 has been designed with low power consumption and
low costs in mind. Intelligent power management is a break-
through for low-power applications. These receivers combine
a high level of integration capability with flexible connectivity
options in a small package. This makes them perfectly suited
for mass-market end products with strict size and cost re-
quirements. The DDC interface provides connectivity and en-
ables synergies with u-blox LEON and LISA wireless modules.
• Simple integration with u-blox wireless modules
• A-GPS: AssistNow Online and AssistNow Offline services,
OMA SUPL compliant
• Backward compatible (hardware and firmware); easy
migration from NEO-5 family or NEO-4S
All NEO-6 modules are manufactured in ISO/TS 16949
certified sites. Each module is tested and inspected during
production. The modules are qualified according to ISO 16750
- Environmental conditions and electrical testing for electrical
and electronic equipment for road vehicles.
• LCC package for reliable and cost effective manufacturing
• Compatible with u-blox GPS Solution for Android
• Based on GPS chips qualified according to AEC-Q100
• Manufactured in ISO/TS 16949 certified production sites
• Qualified according to ISO 16750
Product selector
Model
Type
Supply
Interfaces
Features
NEO-6G
•
•
•
•
•
•
T
•
3
1
•
NEO-6Q
NEO-6M
•
•
•
•
•
•
•
•
•
•
•
•
T
•
•
3
3
1
1
•
•
C
= requires external components and integration on application processor
C = Crystal / T = TCXO
Receiver performance data
Package
Receiver type
50-channel u-blox 6 engine
GPS L1 C/A code
SBAS: WAAS, EGNOS, MSAS
24 pin LCC (Leadless Chip Carrier): 12.2 x 16.0 x 2.4 mm, 1.6 g
Pinout
13
14
GND
GND 12
11
RF_IN
MOSI/CFG_COM0
Navigation update rate up to 5 Hz
15 MISO/CFG_COM1
GND 10
9
16
17
CFG_GPS0/SCK
Reserved
VCC_RF
Accuracy1
Position
2.5 m CEP
8
Reserved
SBAS
2.0 m CEP
NEO-6
Acquisition1
NEO-6G/Q
NEO-6M
18
19
7
6
VDDUSB
USB_DP
SDA2
SCL2
TxD1
Top View
Cold starts:
Aided starts2:
Hot starts:
26 s
1 s
1 s
27 s
< 3 s
1 s
20
21
22
USB_DM
EXTINT0
TIMEPULSE
SS_N
5
4
RxD1
V_BCKP
VCC
3
23
24
2
1
Sensitivity3
NEO-6G/Q
NEO-6M
GND
Reserved
Tracking:
Cold starts:
Hot starts:
–162 dBm –161 dBm
–148 dBm –147 dBm
–157 dBm –156 dBm
Environmental data, quality & reliability
1
Operating temp.
Storage temp.
–40° C to 85° C
–40° C to 85° C
All SV @ –130 dBm
Dependent on aiding data connection speed and latency
Demonstrated with a good active antenna
2
3
RoHS compliant (lead-free)
Qualification according to ISO 16750
Manufactured in ISO/TS 16949 certified production sites
Electrical data
Power supply
2.7 V – 3.6 V (NEO-6Q/6M)
1.75 V – 2.0V (NEO-6G)
Support products
u-blox 6 Evaluation Kits:
Power consumption
111 mW @ 3.0V (continuous)
33 mW @ 3.0V Power Save Mode (1 Hz)
68mW @ 1.8V (continuous)
22 mW @ 1.8V Power Save Mode (1 Hz)
Easy-to-use kits to get familiar with u-blox 6 positioning
technology, evaluate functionality, and visualize GPS performance.
EVK-6H:
EVK-6P:
u-blox6 Evaluation Kit with TCXO, suitable
for NEO-6G, NEO-6Q
u-blox6 Evaluation Kit with crystal, suitable
for NEO-6M
Backup power
1.4 V – 3.6V, 22 µA
Supported antennas
Active and passive
Ordering information
NEO-6G-0
NEO-6M-0
NEO-6Q-0
u-blox 6 GPS Module, 1.8V, TCXO,
12x16mm, 250 pcs/reel
u-blox 6 GPS Module, 12x16mm,
250 pcs/reel
Interfaces
u-blox 6 GPS Module, TCXO, 12x16mm,
250 pcs/reel
Serial interfaces
1 UART
Available as samples and tape on reel (250 pieces)
1 USB V2.0 full speed 12 Mbit/s
1 DDC (I2C compliant)
1 SPI
Digital I/O
Configurable timepulse
1 EXTINT input for Wakeup
Contact us
HQ Switzerland
+41 44 722 7444
info@u-blox.com
China
+86 10 68 133 545
info_cn@u-blox.com
Serial and I/O
Voltages
2.7 – 3.6 V(NEO-6Q/6M)
1.75 – 2.0 V(NEO-6G)
Timepulse
Configurable
0.25 Hz to 1 kHz
EMEA
+41 44 722 7444
info@u-blox.com
Japan
+81 3 5775 3850
info_jp@u-blox.com
Protocols
NMEA, UBX binary, RTCM
Americas
Korea
Legal Notice
u-blox reserves all rights to this document and the information contained herein. Products, names, logos
and designs described herein may in whole or in part be subject to intellectual property rights. Reproduc-
tion, use, modification or disclosure to third parties of this document or any part thereof without the
express permission of u-blox is strictly prohibited.
+1 703 483 3180
info_us@u-blox.com
+82 2 542 0861
info_kr@u-blox.com
The information contained herein is provided “as is”. No warranty of any kind, either express or implied, is
made in relation to the accuracy, reliability, fitness for a particular purpose or content of this document. This
document may be revised by u-blox at any time. For most recent documents, please visit www.u-blox.com.
APAC – Singapore
+65 6734 3811
info_ap@u-blox.com
Taiwan
+886 2 2657 1090
info_tw@u-blox.com
Copyright © 2011, u-blox AG
Specification applies to FW 7
www.u-blox.com
GPS.G6-HW-09003-D
相关型号:
©2020 ICPDF网 联系我们和版权申明