SM4Z24A [UNSEMI]

Surface Mount Transient Voltage Suppressors;
SM4Z24A
型号: SM4Z24A
厂家: UN Semiconducctor INC    UN Semiconducctor INC
描述:

Surface Mount Transient Voltage Suppressors

文件: 总4页 (文件大小:1053K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Surface Mount Transient Voltage Suppressors  
The SM4Z series is designed specifically to protect sensitive  
electronic equipment from voltage transients induced by lightning  
and other transient voltage events.  
Working Voltage: 15 to 43 V  
They provide a clamping voltage lower than the avalanche  
voltage. Therefore, any voltage rise due to increased current  
conduction is contained to a minimum, providing  
the best  
possible protection level. They can also be connected in series  
and/or parallel to create very high capacity protection solutions.  
Peak power dissipation 4400W @10 x 1000 us Pulse.  
Glass passivated chip junction .  
Low leakage  
Excellent clamping capability  
Available in uni-directional polarity only  
TJ = 175 ° C capability suitable for high reliability and  
automotive requirement  
Meet with ISO 7637-2,ISO 16750,etc  
Halogen free and RoHS compliant  
CASE: SOD-BLOCK Molded Plastic over glass  
passivated junction  
Use in sensitive electronics protection against voltage transients  
induced by inductive load switching and lighting, especially for  
automotive load dump protection application  
Polarity: Heatsink is Anode  
Terminal: Solder plated  
Parameter  
Symbol  
PPPM  
Value  
Units  
Peak power dissipation with a 10/1000us waveform  
4400  
W
Power Dissipation on Infinite Heat Sink at TL=75°C  
Peak pulse current with a 10/1000us waveform  
PD  
I PP  
6.0  
W
A
See Next Table  
T J , T STG  
Operating junction and storage temperature range  
55 to +150  
°C  
IFSM  
Peak forward surge current, 8.3ms single half sine-wave  
500  
A
@ UN Semiconductor Co., Ltd. 2018  
Specifications are subject to change without notice.  
Revision April 24, 2018  
1 / 4  
Please refer to www.unsemi.com.tw for current information.  
Surface Mount Transient Voltage Suppressors  
Breakdown  
Voltage  
Maximum  
Reverse  
Leakage I R  
@V RWM  
Maximum  
Reverse  
Surge  
Current I PP  
(A)  
Test  
Current  
IT  
Maximum  
Clamping  
Voltage  
Part Number  
Uni  
Stand-Off  
Voltage VRMW  
(V)  
VBR  
(1)  
(mA)  
V C @I PP (V)  
min(V)  
max(V)  
(uA)  
SM4Z15A  
SM4Z16A  
15.0  
16.0  
16.70  
17.80  
18.50  
20.5  
5.0  
5.0  
10  
10  
188  
176  
24.4  
26.0  
SM4Z18A  
SM4Z20A  
18.0  
20.0  
22.0  
24.0  
26.0  
28.0  
30.0  
33.0  
36.0  
40.0  
43.0  
20.00  
22.20  
24.40  
26.70  
28.90  
31.10  
33.30  
36.70  
40.00  
44.40  
47.80  
22.10  
24.50  
26.90  
29.50  
31.90  
34.40  
36.80  
40.60  
44.20  
49.10  
52.80  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
10  
157  
141  
129  
118  
109  
100  
95  
29.2  
32.4  
35.5  
38.9  
42.1  
45.4  
48.4  
53.3  
58.1  
64.5  
69.4  
SM4Z22A  
SM4Z24A  
SM4Z26A  
SM4Z28A  
SM4Z30A  
SM4Z33A  
86  
SM4Z36A  
79  
SM4Z40A  
71  
SM4Z43A  
66  
Note:(1)Surge waveform: 10/1000μs  
PPPM Peak Pulse Power Dissipation - Max power dissipation  
VRWM Reverse Stand-off Voltage - Maximum voltage that can  
be applied to TVS without operation  
VBR Breakdown Voltage Maximum voltage that flows  
though the TVS at a specified current (IT)  
VC Clamping Voltage Peak voltage measured across the  
TVS at a specified IPPM (peak impulse current)  
IR Reverse Leakage Current Current measured at VR  
VF Forward Voltage Drop for Uni-directional  
@ UN Semiconductor Co., Ltd. 2018  
Specifications are subject to change without notice.  
Revision April 24, 2018  
2 / 4  
Please refer to www.unsemi.com.tw for current information.  
Surface Mount Transient Voltage Suppressors  
TEST  
NUMBER OF  
PULSE  
SYSTEM  
Us(V)  
TdmsRiΩ )  
LEVEL  
12V  
24V  
87  
174  
400  
2
10 pulse  
10 pulse  
200  
4
Soldering Parameters  
Reflow Condition  
Leadfree assembly  
TP  
Critical Zone  
TL to TP  
-Temperature Min (Ts(min)  
)
-Temperature Max (Ts(max)  
- Time (min to max) (ts)  
150°C  
Ramp-up  
TL  
Pre Heat  
)
200°C  
TS(max)  
60 -180 Seconds  
Ramp-down  
Average ramp up rate ( Liquidus Temp TL)  
to peak  
3°C/second max  
TS(min)  
TS(max) to TL - Ramp-up Rate  
3°C/second max  
217°C  
Preheat  
- Temperature (TL) (Liquidus)  
Reflow  
25  
Time to peak temperature  
- Time (min to max) (ts)  
Time  
60 -150 Seconds  
260 +0/-5°C  
(t 25to peak)  
Peak Temperature (TP)  
Time within 5°C of actual peak  
Temperature (tp)  
20 -40 Seconds  
Ramp-down Rate  
6°C/second max  
8 minutes Max  
280°C  
Time 25°C to peak Temperature (TP)  
Do not exceed  
@ UN Semiconductor Co., Ltd. 2018  
Specifications are subject to change without notice.  
Revision April 24, 2018  
3 / 4  
Please refer to www.unsemi.com.tw for current information.  
Surface Mount Transient Voltage Suppressors  
@ UN Semiconductor Co., Ltd. 2018  
Specifications are subject to change without notice.  
Revision April 24, 2018  
4 / 4  
Please refer to www.unsemi.com.tw for current information.  

相关型号:

SM4Z26A

Surface Mount Transient Voltage Suppressors
UNSEMI

SM4Z28A

Surface Mount Transient Voltage Suppressors
UNSEMI

SM5

Ceramic Surface Mount Crystal
VANLONG

SM5-24

Slot Machine Transformers
POWERVOLT

SM50

RECTIFIER UP YO 10kV, 300mA, 2.5us
SEMTECH

SM500-1

ADSL POTS SPLITTER INDUCTORS
DATATRONICS

SM500-10

ADSL POTS SPLITTER INDUCTORS
DATATRONICS

SM500-11

ADSL POTS SPLITTER INDUCTORS
DATATRONICS

SM500-12

ADSL POTS SPLITTER INDUCTORS
DATATRONICS

SM500-13

ADSL POTS SPLITTER INDUCTORS
DATATRONICS

SM500-14

ADSL POTS SPLITTER INDUCTORS
DATATRONICS

SM500-2

ADSL POTS SPLITTER INDUCTORS
DATATRONICS