TP5.0SMDJ33CA [UNSEMI]

Surface Mount Transient Voltage Suppressors;
TP5.0SMDJ33CA
型号: TP5.0SMDJ33CA
厂家: UN Semiconducctor INC    UN Semiconducctor INC
描述:

Surface Mount Transient Voltage Suppressors

文件: 总5页 (文件大小:1126K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Surface Mount Transient Voltage Suppressors  
TVS diodes can be used in a wide range of applications which like  
consumer electronic products, automotive industries, munitions,  
telecommunications, aerospace industries, and intelligent control  
systems.  
Working Voltage: 10 to 58 V  
Peak Pulse Power: 5000 W  
Glass passivated chip  
5000W peak pulse power capability with a 10/1000 μ s  
waveform, repetitive rate (duty cycle):0.01 %  
High reliability application and automotive grade AEC Q101  
qualified  
Case: Molded plastic  
Epoxy: UL 94V-0 rate flame retardant  
Lead: Solderable per MIL-STD-750, method  
2026  
Meet ISO 7637-2 load dump test (varied by test condition)  
Low leakage  
Polarity: Color band denotes cathode end except  
Bipolar  
Uni and Bidirectional unit  
Mounting position: Any  
Excellent clamping capability  
Very fast response time  
RoHS compliant  
TVS devices are ideal for the protection of I/O interfaces, VCC bus  
and other vulnerable circuits used in Telecom, Computer, Industrial  
and Consumer electronic applications.  
Parameter  
Symbol  
Value  
Units  
Peak power dissipation with a 10/1000μs waveform(1)  
PPPM  
5000  
W
Power Dissipation on Infinite Heat Sink at TL=75°C  
PD  
6.5  
W
A
Peak pulse current with a 10/1000μs waveform(1)  
I PP  
See Next Table  
Operating junction and storage temperature range  
-55 to +150  
3.5  
°C  
T J , T STG  
Maximum Instantaneous Forward Voltage at 50A for  
Unidirectional  
V
VF  
Peak forward surge current, 8.3 ms single half sine-wave  
unidirectional only(2)  
IFSM  
300  
A
Note:  
(1)Non-repetitive current pulse per Fig.5 and derated above TA= 25per Fig.1  
(2)Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum  
@ UN Semiconductor Co., Ltd. 2018  
Specifications are subject to change without notice.  
Revision July 18, 2018  
1 / 5  
Please refer to www.unsemi.com.tw for current information.  
Surface Mount Transient Voltage Suppressors  
Maximum  
Peak  
Pulse  
Current  
IPP (A)  
Maximum  
Reverse  
Leakage  
IR  
Breakdown  
Reverse  
Test  
Current  
IT  
Maximum  
Clamping  
Voltage VC  
@IPP (V)  
Part Number  
Marking  
Uni Bi  
Voltage VBR (V)  
@IT  
Stand-Off  
Voltage  
VRWM(V)  
(mA)  
Uni  
Bi  
MIN  
MAX  
@VRWM  
TP5.0SMDJ10A TP5.0SMDJ10CA 5SAE 5DAE  
TP5.0SMDJ11A TP5.0SMDJ11CA 5SAF 5DAF  
10.0  
11.0  
11.10  
12.20  
12.30  
13.50  
1
1
17.0  
18.2  
294.12  
275.0  
5
2
TP5.0SMDJ12A TP5.0SMDJ12CA 5SAG 5DAG  
TP5.0SMDJ13A TP5.0SMDJ13CA 5SAK 5DAK  
TP5.0SMDJ14A TP5.0SMDJ14CA 5SAM 5DAM  
TP5.0SMDJ15A TP5.0SMDJ15CA 5SAP 5DAP  
TP5.0SMDJ16A TP5.0SMDJ16CA 5SAR 5DAR  
TP5.0SMDJ17A TP5.0SMDJ17CA 5SAT 5DAT  
TP5.0SMDJ18A TP5.0SMDJ18CA 5SAV 5DAV  
12.0  
13.0  
14.0  
15.0  
16.0  
17.0  
18.0  
13.30  
14.40  
15.60  
16.70  
17.80  
18.90  
20.00  
14.70  
15.90  
17.20  
18.50  
19.70  
20.90  
22.10  
1
1
1
1
1
1
1
19.9  
21.5  
23.2  
24.4  
26.0  
27.6  
29.2  
252.0  
233.0  
216.0  
205.0  
193.0  
181.0  
172.0  
2
2
2
2
2
2
2
TP5.0SMDJ19A TP5.0SMDJ19CA 5SAX 5DAX  
19.0  
21.10  
23.30  
1
29.2  
162.4  
2
TP5.0SMDJ20A TP5.0SMDJ20CA 5SAZ 5DAZ  
TP5.0SMDJ22A TP5.0SMDJ22CA 5SBE 5DBE  
TP5.0SMDJ24A TP5.0SMDJ24CA 5SBF 5DBF  
TP5.0SMDJ26A TP5.0SMDJ26CA 5SBG 5DBG  
TP5.0SMDJ28A TP5.0SMDJ28CA 5SBK 5DBK  
TP5.0SMDJ30A TP5.0SMDJ30CA 5SBM 5DBM  
TP5.0SMDJ33A TP5.0SMDJ33CA 5SBP 5DBP  
TP5.0SMDJ36A TP5.0SMDJ36CA 5SBR 5DBR  
TP5.0SMDJ40A TP5.0SMDJ40CA 5SBT 5DBT  
TP5.0SMDJ43A TP5.0SMDJ43CA 5SBV 5DBV  
TP5.0SMDJ45A TP5.0SMDJ45CA 5SBX 5DBX  
TP5.0SMDJ48A TP5.0SMDJ48CA 5SBZ 5DBZ  
TP5.0SMDJ51A TP5.0SMDJ51CA 5SCE 5DCE  
TP5.0SMDJ54A TP5.0SMDJ54CA 5SCF 5DCF  
TP5.0SMDJ58A TP5.0SMDJ58CA 5SCG 5DCG  
20.0  
22.0  
24.0  
26.0  
28.0  
30.0  
33.0  
36.0  
40.0  
43.0  
45.0  
48.0  
51.0  
54.0  
58.0  
22.20  
24.40  
26.70  
28.90  
31.10  
33.30  
36.70  
40.00  
44.40  
47.80  
50.00  
53.30  
56.70  
60.00  
64.40  
24.50  
26.90  
29.50  
31.90  
34.40  
36.80  
40.60  
44.20  
49.10  
52.80  
55.30  
58.90  
62.70  
66.30  
71.20  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
32.4  
35.5  
38.9  
42.1  
45.4  
48.4  
53.3  
58.1  
64.5  
69.4  
72.7  
77.4  
82.4  
87.1  
93.6  
155.0  
141.0  
129.0  
119.0  
110.0  
103.0  
93.9  
86.1  
77.6  
72.1  
68.8  
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
64.7  
60.7  
57.5  
53.5  
Note:  
(1) Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices  
(2) For Bi-Directional devices having VR of 10 volts and under, the IR limit is double  
@ UN Semiconductor Co., Ltd. 2018  
Specifications are subject to change without notice.  
Revision July 18, 2018  
2 / 5  
Please refer to www.unsemi.com.tw for current information.  
Surface Mount Transient Voltage Suppressors  
100  
Tr=10μs  
TJ = 25 °C  
100  
50  
0
Peak Value  
(Ipp)  
Pulse Width (td) is defined as the  
point where the peak current  
75  
decays to 50 % of Ipp  
Half Value = Ipp  
2
50  
25  
0
10/1000 μsec. Waveform  
as defined by R.E.A.  
td  
0
25  
50  
75  
100  
125  
150  
175  
200  
0
1
2
3
4
Time , (ms)  
Ambient Temperature ,TA ()  
7.0  
6.0  
5.0  
4.0  
3.0  
2.0  
1.0  
0.0  
1000  
100  
10  
1
0.1  
0
25  
50  
75  
100  
125  
150  
175  
200  
1
10  
Pulse Width ,td (μs)  
100  
1000  
Lead Temperature , TL ()  
@ UN Semiconductor Co., Ltd. 2018  
Specifications are subject to change without notice.  
Revision July 18, 2018  
3 / 5  
Please refer to www.unsemi.com.tw for current information.  
Surface Mount Transient Voltage Suppressors  
100000  
300  
Uni-directional  
@zero bias  
TJ=TJ max.  
8.3ms Single Half Sine-Wave  
Bi-directional  
@zero bias  
10000  
1000  
100  
10  
250  
200  
150  
100  
50  
Uni-directinoal @VRWM  
Bi-directinoal@VRWM  
TJ=25 °C  
f=1.0MHz  
0
1
1
10  
Number of Cycles at 60 Hz  
100  
1
10  
100  
Reverse Breakdown Voltage,VBR (V)  
T P 5 . 0 S M D J × × × C A  
5% VBR Voltage Tolerance  
Uni/Bi-Directional  
VR Voltage  
Automotive Series  
@ UN Semiconductor Co., Ltd. 2018  
Specifications are subject to change without notice.  
Revision July 18, 2018  
4 / 5  
Please refer to www.unsemi.com.tw for current information.  
Surface Mount Transient Voltage Suppressors  
Reflow Condition  
-Temperature Min (Ts(min)  
Lead–free assembly  
TP  
Critical Zone  
TL to TP  
)
150°C  
Ramp-up  
TL  
Pre Heat  
-Temperature Max (Ts(max)  
- Time (min to max) (ts)  
)
200°C  
TS(max)  
60 -180 Seconds  
Ramp-down  
Average ramp up rate ( Liquidus Temp TL)  
to peak  
3°C/second max  
TS(min)  
TS(max) to TL - Ramp-up Rate  
3°C/second max  
217°C  
Preheat  
- Temperature (TL) (Liquidus)  
Reflow  
25  
Time to peak temperature  
- Time (min to max) (ts)  
60 -150 Seconds  
260 +0/-5°C  
Time  
(t 25to peak)  
Peak Temperature (TP)  
Time within 5°C of actual peak  
Temperature (tp)  
20 -40 Seconds  
Ramp-down Rate  
6°C/second max  
8 minutes Max  
280°C  
Time 25°C to peak Temperature (TP)  
Do not exceed  
Dimensions  
Inches  
Millimeters  
DO-214AB (SMC)  
Cathode Band  
Dimensions  
Min  
0.114  
0.260  
0.220  
0.079  
0.030  
-
Max  
0.126  
0.280  
0.245  
0.103  
0.060  
0.008  
0.320  
0.012  
-
Min  
2.86  
6.520  
5.520  
1.980  
0.750  
-
Max  
3.160  
7.020  
6.150  
2.590  
1.510  
0.203  
8.020  
0.305  
-
A
B
C
D
E
F
G
H
I
0.305  
0.006  
0.129  
0.094  
-
7.640  
0.152  
3.300  
2.400  
-
J
-
-
K
L
0.165  
-
4.200  
-
0.094  
2.400  
@ UN Semiconductor Co., Ltd. 2018  
Specifications are subject to change without notice.  
Please refer to www.unsemi.com.tw for current information.  
Revision July 18, 2018  
5 / 5  

相关型号:

TP5.0SMDJ36A

Surface Mount Transient Voltage Suppressors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ANOVA

TP5.0SMDJ36A

Surface Mount Transient Voltage Suppressors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
UNSEMI

TP5.0SMDJ36CA

Surface Mount Transient Voltage Suppressors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ANOVA

TP5.0SMDJ36CA

Surface Mount Transient Voltage Suppressors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
UNSEMI

TP5.0SMDJ40A

Surface Mount Transient Voltage Suppressors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ANOVA

TP5.0SMDJ40A

Surface Mount Transient Voltage Suppressors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
UNSEMI

TP5.0SMDJ40CA

Surface Mount Transient Voltage Suppressors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ANOVA

TP5.0SMDJ40CA

Surface Mount Transient Voltage Suppressors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
UNSEMI

TP5.0SMDJ43A

Surface Mount Transient Voltage Suppressors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ANOVA

TP5.0SMDJ43A

Surface Mount Transient Voltage Suppressors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
UNSEMI

TP5.0SMDJ43CA

Surface Mount Transient Voltage Suppressors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ANOVA

TP5.0SMDJ43CA

Surface Mount Transient Voltage Suppressors

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
UNSEMI