L11810G-33-AA3-A-R [UTC]

Fixed Positive LDO Regulator, 3.3V, 1V Dropout, CMOS, PDSO3, HALOGEN FREE, SOT-223, 4 PIN;
L11810G-33-AA3-A-R
型号: L11810G-33-AA3-A-R
厂家: Unisonic Technologies    Unisonic Technologies
描述:

Fixed Positive LDO Regulator, 3.3V, 1V Dropout, CMOS, PDSO3, HALOGEN FREE, SOT-223, 4 PIN

光电二极管 输出元件 调节器
文件: 总4页 (文件大小:194K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
UNISONIC TECHNOLOGIES CO., LTD  
L11810  
Preliminary  
CMOS IC  
1A CMOS LOW DROPOUT  
VOLTAGE  
„
DESCRIPTION  
As UTC LDO, the features of the UTC L11810 include low  
quiescent current and very low dropout voltage.  
In order to prevent from the bad operating conditions, there are  
internal thermal shutdown and current fold-back. For stably operation,  
the UTC L11810 should be connected to an output capacitance of  
2.2μF or larger.  
1
SOT-223  
The UTC L11810 is ideal for battery applications, such as  
portable electronics, wireless devices, cordless phones, PC  
peripherals and battery powered widgets.  
„
FEATURES  
* Extra low dropout voltage  
* Output current: 1A (guaranteed)  
* Output voltage accuracy: ±1.5%  
* Quiescent current: 30μA  
* Internal Over-Temperature shutdown  
* With Current limiting  
* Internal short circuit current fold-back  
* Pre-set output voltages in factory  
* Very low temperature coefficient  
„
ORDERING INFORMATION  
Ordering Number  
Pin Assignment  
Package  
Packing  
Lead Free  
Halogen Free  
1
G
I
2
3
I
L11810L-xx-AA3-A-R  
L11810L-xx-AA3-D-R  
L11810G-xx-AA3-A-R  
L11810G-xx-AA3-D-R  
SOT-223  
SOT-223  
O
G
Tape Reel  
Tape Reel  
O
Note: Pin Assignment: G:GND O:VOUT I:VIN  
xx: Output Voltage, refer to Marking Information.  
www.unisonic.com.tw  
1 of 4  
Copyright © 2012 Unisonic Technologies Co., Ltd  
QW-R502-329.d  
L11810  
Preliminary  
CMOS IC  
„
MARKING INFORMATION  
PACKAGE  
VOLTAGE CODE  
MARKING  
L11810G  
G: Halogen Free  
L: Lead Free  
28 :2.8V  
33 :3.3V  
Pin Code  
SOT-223  
XX□□□□  
Voltage Code  
Date Code  
1
2
3
„
PIN CONFIGURATION  
„
„
PIN DESCRIPTION  
PIN NO  
PIN NAME  
VIN  
DESCRIPTION  
1
2
Input voltage pin which should be decoupled with 1µF or greater capacitor.  
GND  
Ground.  
Output voltage pin which should be decoupled with a ceramic capacitor (value: 2.2µF or  
larger and low ESR).  
3
VOUT  
BLOCK DIAGRAM  
VIN  
Overcurrrent  
Shutdown  
Thermal  
Shutdown  
VREF=1.215V  
AMP  
VOUT  
R1  
R2  
GND  
UNISONIC TECHNOLOGIES CO., LTD  
2 of 4  
QW-R502-329.d  
www.unisonic.com.tw  
L11810  
Preliminary  
CMOS IC  
„
ABSOLUTE MAXIMUM RATING  
PARAMETER  
SYMBOL  
VIN  
RATINGS  
UNIT  
V
Input Voltage  
8
Input ,Output Voltage  
Output Current  
GND - 0.3 ~ VIN + 0.3  
V
IOUT  
PD  
1.2  
900  
A
Power Dissipation  
mW  
°C  
°C  
°C  
Junction Temperature  
Operating Temperature  
Storage Temperature  
TJ  
125  
TOPR  
TSTG  
- 40 ~ +85  
- 65 ~ +150  
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.  
Absolute maximum ratings are stress ratings only and functional device operation is not implied.  
„
THERMAL DATA  
PARAMETER  
SYMBOL  
θJA  
RATINGS  
120  
UNIT  
°C/W  
°C/W  
Junction to Ambient  
Junction to Case (Note)  
θJC  
25  
Note: Measure θJC on backside center of tab  
„
ELECTRICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified.)  
PARAMETER  
SYMBOL  
VIN  
TEST CONDITIONS  
MIN TYP MAX UNIT  
Input Voltage  
Note1  
-1.5  
7
V
Output Voltage Accuracy  
VOUT  
IOUT =1mA  
1.5  
0.15  
%
%
%
%
1.8VVOUT2.0V  
-0.15  
ΔVOUT  
IOUT =1mA,  
Line Regulation  
2.0V<VOUT<4.0V  
VOUT4.0V  
-0.1 0.02 0.1  
-0.4 0.2 0.4  
VOUT  
VIN=VOUT+1~VOUT+2  
ΔVOUT  
VOUT  
IOUT  
ILIMIT  
ISC  
Load Regulation  
IOUT =1mA~1000mA  
0.4 1.2  
%
Output Current  
VOUT1.8V  
VOUT1.8V  
VOUT<0.8V  
IOUT=0mA  
1000  
mA  
mA  
mA  
µA  
Current Limit  
1100  
Short Circuit Current  
Quiescent Current  
Ground Pin Current  
400 800  
IQ  
30  
35  
50  
IGND  
IOUT =1mA~1000mA  
µA  
1.8VVOUT(NOM)2.0  
V
1700 mV  
1200 mV  
I
V
OUT=1A  
OUT=VOUT(NOM) -2.0%  
Dropout Voltage  
VD  
2.0V<VOUT(NOM)2.8  
V
2.8V<VOUT(NOM)  
1000 mV  
Over Temperature Shutdown  
Over Temperature Hysteresis  
Temperature Coefficient of  
Output Voltage  
OTS  
OTH  
150  
30  
°C  
°C  
TCVO  
30  
ppm/°C  
f=100Hz  
f=1kHz  
60  
50  
20  
30  
dB  
dB  
Power Supply Ripple  
Rejection  
I
OUT=100mA  
PSRR  
eN  
CO =2.2µF  
f=10kHz  
dB  
Output Voltage Noise  
IOUT=10mA, COUT=2.2μF, f=10Hz~100kHz  
µVRMS  
Notes:1.VIN(MIN)=VOUT+VD  
2.To prevent the Short Circuit Current protection feature from being prematurely activated, the input voltage  
must be applied before a current source load is applied.  
UNISONIC TECHNOLOGIES CO., LTD  
3 of 4  
QW-R502-329.d  
www.unisonic.com.tw  
L11810  
Preliminary  
CMOS IC  
„
TYPICAL APPLICATION CIRCUIT  
„
APPLICATION INFORMATION  
1. Detailed Description  
Internal circuits include: a PMOS pass transistor, voltage reference, error amplifier, over-current protection, and  
thermal shutdown.  
The data through the error amplifier, over-current shutdown, and thermal protection circuits, then to the  
P-channel pass transistor.  
As soon as the junction temperature exceeds 150°C or the current exceeds 1100mA, over-current and thermal  
shutdown circuits start working. When the junction temperature drops below 120°C, normal operation is restored.  
When the load exceeds the rated output current, for preventing the over stress, the chip switches from voltage  
mode to current mode.  
2. External Information  
When considering the external capacitors, the L11810 is stable with an output capacitor to ground of 2.2μF or  
greater. As we know, the ceramic capacitors have the lowest ESR but can offer the best AC performance; the  
aluminum electrolytic capacitors exhibit the highest ESR but offer the poorest AC response. And also large value  
ceramic capacitors are expensive. Consider all the situation, the best way is to parallel a 0.1μF ceramic capacitor with  
a 10μF Aluminum Electrolytic (low ESR, high capacitance, and low overall cost).  
For better beneficial effecting, the input capacitor should be at least 0.1μF.  
UTC assumes no responsibility for equipment failures that result from using products at values that  
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or  
other parameters) listed in products specifications of any and all UTC products described or contained  
herein. UTC products are not designed for use in life support appliances, devices or systems where  
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in  
whole or in part is prohibited without the prior written consent of the copyright owner. The information  
presented in this document does not form part of any quotation or contract, is believed to be accurate  
and reliable and may be changed without notice.  
UNISONIC TECHNOLOGIES CO., LTD  
4 of 4  
QW-R502-329.d  
www.unisonic.com.tw  

相关型号:

L11810G-XX-AA3-A-R

1A CMOS LOW DROPOUT VOLTAGE
UTC

L11810G-XX-AA3-D-R

1A CMOS LOW DROPOUT VOLTAGE
UTC

L11810L-28-AA3-A-R

Fixed Positive LDO Regulator
UTC

L11810L-28-AA3-D-R

Fixed Positive LDO Regulator
UTC

L11810L-33-AA3-A-R

Fixed Positive LDO Regulator
UTC

L11810L-33-AA3-D-R

Fixed Positive LDO Regulator
UTC

L11810L-XX-AA3-A-R

1A CMOS LOW DROPOUT VOLTAGE
UTC

L11810L-XX-AA3-D-R

1A CMOS LOW DROPOUT VOLTAGE
UTC

L11810_10

1A CMOS LOW DROPOUT VOLTAGE
UTC

L11810_12

1A CMOS LOW DROPOUT VOLTAGE
UTC

L11815A

1.5A CMOS LDO
UTC

L11815AG-15-TA3-D-R

Fixed Positive LDO Regulator, 1.5V, 1.3V Dropout, CMOS, HALOGEN FREE, TO-220, 3 PIN
UTC