51494G-D16-T [UTC]

LINEAR INTEGRATED CIRCUIT; 线性集成电路
51494G-D16-T
型号: 51494G-D16-T
厂家: Unisonic Technologies    Unisonic Technologies
描述:

LINEAR INTEGRATED CIRCUIT
线性集成电路

文件: 总5页 (文件大小:171K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
UNISONIC TECHNOLOGIES CO., LTD  
51494  
LINEAR INTEGRATED CIRCUIT  
„
DESCRIPTION  
The UTC 51494 is a monolithic bipolar integrate circuit that  
provides same 494 function and built in power good signal  
circuit for easy using 51494 can be easily implemented by  
just adding a capacitor.  
SOP-16  
„
FEATURES  
* Fully integrated with compact 16-pin dip  
* All necessary functions included for most popular half bridge  
circuit.  
* Built-in power good delay and power fail lead function.  
* Power good delay time is linearly.  
* Proportional to external capacitor value.  
* Reduced external components for cost down and  
components for cost down and compact size.  
DIP-16  
„ ORDERING INFORMATION  
Ordering Number  
Package  
Packing  
Lead Free  
Halogen Free  
51494G-S16-R  
51494G-S16-T  
51494G-D16-T  
51494L-S16-R  
51494L-S16-T  
51494L-D16-T  
SOP-16  
SOP-16  
DIP-16  
Tape Reel  
Tube  
Tube  
www.unisonic.com.tw  
1 of 5  
Copyright © 2012 Unisonic Technologies Co., LTD  
QW-R103-005.Ba  
51494  
LINEAR INTEGRATED CIRCUIT  
„
PIN ASSIGNMENT  
EA1+  
EA1-  
1
2
3
4
5
6
7
8
16  
EA2+  
15  
14  
EA2-  
VREF  
P.G.  
EA0  
DT  
13  
12  
11  
10  
9
CT  
RT  
VCC  
C2  
GND  
C1  
CPG  
GND  
PIN  
1
NAME  
FUNCTION  
EA1+ Error amplifier noninverting input, same as pin 1 of 494  
EA1- Error amplifier inverting input, same as pin 2 of 494  
2
3
EA0  
DT  
Error amplifier output and feedback, same as pin 3 of 494  
4
Dead time control input, same as pin 4 of 494  
5
CT  
Connect capacitor to oscillator circuit for operating frequency, same as pin 5 of 494  
Connect resistor to oscillator circuit for operating frequency, same as pin 6 of 494  
6
RT  
7
GND Ground terminal of IC, same as pin 7 of 494  
C1 Collector of output transistor one, same as pin 8 of 494  
GND Ground terminal of IC  
8
9
10  
11  
12  
13  
14  
15  
16  
CPG  
C2  
Terminal for capacitor to determine power good delay time  
Collector of output transistor two, same as pin 11 of 494  
Supply voltage, same as pin 12 of 494  
VCC  
P.G.  
VREF  
Output for power good signal  
Reference voltage output, same as pin 14 of 494  
EA2- Error amplifier inverting input, same as pin 15 of 494  
EA+ Error amplifier noninverting input, same as pin 16 of 494  
UNISONIC TECHNOLOGIES CO., LTD  
2 of 5  
QW-R103-005.Ba  
www.unisonic.com.tw  
51494  
LINEAR INTEGRATED CIRCUIT  
„
BLOCK DIAGRAM  
12  
VCC  
Reference  
Regulator  
14  
7
Ref Out  
GND  
C1  
8
TF.E  
C2  
11  
RT  
CT  
6
5
GND  
9
Osc  
Dead Time  
COMPARATOR  
+
-
Dead-Time  
Control  
4
+
-
PWM  
EA1  
EA2  
1
2
Non-inv Input  
Inv Input  
+
-
COMPARATOR  
16  
15  
Non Inv Input  
Inv Input  
+
-
P.G.  
3
13  
-
Feed-Back  
+
1.25V  
10  
CPG  
UNISONIC TECHNOLOGIES CO., LTD  
3 of 5  
QW-R103-005.Ba  
www.unisonic.com.tw  
51494  
LINEAR INTEGRATED CIRCUIT  
„
ABSOLUTE MAXIMUM RATINGS  
(Unless otherwise specified, all is over operating free-air temperature Range)  
CHARACTERISTIC  
SYMBOL  
VCC  
RATING  
42  
UNIT  
V
Supply Voltage  
Voltage from any pin to ground (except pin8 & pin11)  
Collector Output Voltage  
Peak Collector Output  
VIN  
VCC +0.3  
42  
V
VC1, VC2  
IC1, IC2  
PD  
V
250  
mA  
mW  
Power Dissipation  
1500  
Operating Temperature  
TOPR  
TSTG  
0 ~ +70  
-40 ~ +150  
125  
Storage Temperature  
Junction Temperature  
TJ  
Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.  
Absolute maximum ratings are stress ratings only and functional device operation is not implied.  
„
ELECTRICAL CHARACTERISTICS (Unless otherwise specified, TA=0~70, VCC=15V, f=10kHz)  
PARAMETER  
SYMBOL  
TEST CONDITIONS  
MIN  
TYP MAX UNIT  
REFERENCE SECTION  
Reference Voltage  
VREF IREF =1.0mA  
4.75  
5
2
5.25  
25  
V
Line Regulation  
VLINE 7V<VCC<40V  
VILOAD 1mA<IREF<5mA  
0<FA<70℃  
mV  
mV  
Load Regulation  
1
15  
Temperature Coefficient  
OSCILLATOR SECTION  
Oscillator Frequency  
0.01  
0.03 %/℃  
FOSC CT=0.01μF, RT=12kΩ  
ΔfOSC CT=0.01μF, RT=12kΩ  
10  
kHz  
Oscillator Frequency Change Over  
Operating Temperature Range  
DEAD TIME CONTROL SECTION  
Input Bias Current ( Pin 4)  
2
%
IIB(DT) VCC =15V, 0V<V4<5.25V  
-2  
3
-10  
45  
μA  
VCC = 15V, Pin 4 = 0V  
DC(MAX)  
Maximum Duty Cycle, Each Output  
43  
0
%
Output Control Pin = VREF  
Zero Duty  
Max Duty  
3.3  
Input Threshold Voltage  
VTH  
V
ERROR AMPLIFIER SECTION  
Input Offset Voltage  
VICS  
IICS  
IIB  
V3=2.5V  
2
10  
250  
1
mV  
nA  
μA  
V
Input Offset Current  
V3=2.5V  
25  
0.2  
Input Bias Current  
V3=2.5V  
Input Common-mode Voltage Range  
Large Signal Open-Loop Voltage Range  
Unity-Gain Band width  
VICR  
GVO  
fC  
7V <VCC< 40V  
0.5V < V3 < 3.5V  
-0.3  
60  
VCC  
74  
dB  
kHz  
650  
UNISONIC TECHNOLOGIES CO., LTD  
4 of 5  
QW-R103-005.Ba  
www.unisonic.com.tw  
51494  
LINEAR INTEGRATED CIRCUIT  
„
ELECTRICAL CHARACTERISTICS(Cont.)  
PARAMETER  
SYMBOL  
TEST CONDITIONS  
MIN  
TYP MAX UNIT  
OUTPUT SECTION  
Collector Off-State Current  
Emitter Off-State Current  
IC(OFF) VCC=VC=40V,VE=0  
IE(OFF) VCC=VC=40V,VE=0  
2
1.1  
6
100  
-100  
1.3  
μA  
μA  
V
Output Saturation Voltage Common-Emitter VCE(SAT) VE=15V, LC=200mA  
OUTPUT CONTROL (pin13)  
Standby Power Supply Current  
Output AC Characteristic  
Raise Time Common-Emitter  
Fall Time Common-Emitter  
PWM COMPARATOR SECTION  
Inhibit Threshold Voltage  
Output Source Current  
ICC  
10  
mA  
TR  
TR  
100  
25  
200  
100  
ns  
ns  
VTHI  
IO+  
IO-  
Zero Duty cycle  
0.5V < V3 < 3.5V  
0.5V < V3 < 3.5V  
4
4.5  
V
2
mA  
mA  
Output Sink Current  
-0.2  
-0.6  
POWER GOOD SECTION  
CD = 1μF  
CD = 0.47μF  
230  
108  
280  
130  
4
330  
160  
Power Good Delay Time  
tPD  
ms  
Power Fail Lead Time  
Output High Voltage  
TP1  
VOH  
VSAT  
IOH  
ms  
V
VPINN = 5V, IL = 1mA  
4.75  
Output Saturation Voltage  
Output Leakage Current  
VPINN = 5V, ISINK = 4mA  
0.4  
V
100  
μA  
UTC assumes no responsibility for equipment failures that result from using products at values that  
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other  
parameters) listed in products specifications of any and all UTC products described or contained herein.  
UTC products are not designed for use in life support appliances, devices or systems where malfunction  
of these products can be reasonably expected to result in personal injury. Reproduction in whole or in  
part is prohibited without the prior written consent of the copyright owner. The information presented in  
this document does not form part of any quotation or contract, is believed to be accurate and reliable  
and may be changed without notice.  
UNISONIC TECHNOLOGIES CO., LTD  
5 of 5  
QW-R103-005.Ba  
www.unisonic.com.tw  

相关型号:

51494G-S16-R

LINEAR INTEGRATED CIRCUIT
UTC

51494G-S16-T

LINEAR INTEGRATED CIRCUIT
UTC

51494L-D16-T

LINEAR INTEGRATED CIRCUIT
UTC

51494L-S16-R

LINEAR INTEGRATED CIRCUIT
UTC

51494L-S16-T

LINEAR INTEGRATED CIRCUIT
UTC

51494_15

LINEAR INTEGRATED CIRCUIT
UTC

5149MIWRTH1R

THE WIDEST RANGE IN MINIATURE SWITCHES
ETC

5149MTH1R

THE WIDEST RANGE IN MINIATURE SWITCHES
ETC

514A4

Infrared Emitting Diodes (IRED)
ETC
SILICON
SILICON
SILICON