BA3308L-S14-T [UTC]
DUAL PREAMPLIFIER WITH ALC; 双前置放大器ALC型号: | BA3308L-S14-T |
厂家: | Unisonic Technologies |
描述: | DUAL PREAMPLIFIER WITH ALC |
文件: | 总4页 (文件大小:174K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UNISONIC TECHNOLOGIES CO., LTD
BA3308
Preliminary
LINEAR INTEGRATED CIRCUIT
DUAL PREAMPLIFIER WITH
ALC
SIP-9
DESCRIPTION
The UTC BA3308 is designed to have dual preamplifier ICs
with built – in ALC circuits for use in stereo amplification. The
preamplifiers have high gain and low distortion. A built-in rectifier
for ALC circuit implies good channel balance and large dynamic
range can be constructed with addition of just an external time
constant circuit.
SOP-14
FEATURES
* Wide operating power supply voltage range
(VCC =4.5V ~ 14V)
* Power-on mute circuit to avoid “pop” noise generation.
* No input coupling capacitors are necessary
* High gain (GVO=80dB)and low noise (VNIN=1µVrms)
* Low distortion (THD=0.1%)
* Good ALC channel balance with built-in ALC rectifier diode
* Adjustable ALC dynamic range by external input resistor.
ORDERING INFORMATION
Ordering Number
Lead Free
Package
Packing
Tube
Halogen Free
BA3308L-G09-T
BA3308L-S14-R
BA3308L-S14-T
BA3308G-G09-T
BA3308G-S14-R
BA3308G-S14-T
SIP-9
SOP-14
SOP-14
Tape Reel
Tube
www.unisonic.com.tw
Copyright © 2011 Unisonic Technologies Co., Ltd
1 of 4
QW-R107-015.Ba
BA3308
Preliminary
LINEAR INTEGRATED CIRCUIT
BLOCK DIAGRAM
SIP-9
SOP-14
UNISONIC TECHNOLOGIES CO., LTD
2 of 4
QW-R107-015.Ba
www.unisonic.com.tw
BA3308
Preliminary
LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATING (Ta = 25℃)
PARAMETER SYMBOL
VCC
RATINGS
16
UNIT
V
Power Supply Voltage
Power Dissipation
SIP-9
950
mW
SOP-14
SIP-9
450
PD
9.5
Derating above Ta = 25℃
℃/mW
SOP-14
4.5
Operating Temperature
Storage Temperature
TOPR
TSTG
0 ~ +85
-65 ~ +125
℃
℃
RECOMMENDED OPERATING CONDITIONS (Ta = 25℃)
PARAMETER
Power Supply Voltage
SYMBOL
VCC
RATINGS
+4.5~ +14
UNIT
V
Note: This IC is not designed to be radiation-resistant.
ELECTRICAL CHARACTERISTICS
(Ta =25℃, VCC =7.0V, f =1kHz and BPF: 20Hz ~ 20kHz, unless otherwise noted.)
PARAMETER
SYMBOL
VOM
TEST CONDITIONS
THD=1%
MIN
0.6
TYP
1.2
MAX
2.0
UNIT
Vrms
Maximum Output Voltage
Conversion with Rg=2.2kΩ and
NAB34dB at 1kHz
Input Conversion Noise Voltage
VNIN
1.0
μVrms
Quiescent Current
IQ
VIN =0Vrms
1.5
15
3.3
31.5
0.1
80
4.5
45
mA
kΩ
%
Input Resistance
RIN
Total Harmonic Distortion
Open Loop Voltage Gain
THD
GVO
NAB34dB, VOUT =40mVrms
VOUT = −10dBV
0.3
70
40
dB
RG =3.9kΩ, VIN =−70dBV
reference, THD=3%
VIN = −60dBV, −30dBV
VO =0dBV, NAB34dB
ALC Range
ALC
70
dB
ALC Channel Balance
Channel Separation
∆ALC
0
2.5
dB
dB
CS
60
75
UNISONIC TECHNOLOGIES CO., LTD
3 of 4
QW-R107-015.Ba
www.unisonic.com.tw
BA3308
Preliminary
LINEAR INTEGRATED CIRCUIT
TYPICAL APPLICATION CIRCUIT
MUTE
-
-
ch2
+
ch1
+
ALC
R8
220Ω
4
9
1
2
3
5
+
6
7
8
R5
18kΩ
+
R7
1MΩ
Vcc
7V
C7
22μF
C8
330μF
R6
18kΩ
R1
3.9KΩ
+
+
R3
R4
R2
3.9kΩ
C5
10μF
39Ω
39Ω
C6
+
+
+
+
C3
100μF
C1
10μF
C2
10μF
C4
100μF
10μF
INPUT2
OUTPUT2
INPUT1 OUTPUT1
R9 (R10)
120kΩ
R11(R12)
4.3kΩ
For playback,instead of R5 and R6,connect
the following NAB time constant circuit
between pins 1 and 3 and 7 and 9.
C9 (C10)
0.027μF
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
4 of 4
QW-R107-015.Ba
www.unisonic.com.tw
相关型号:
©2020 ICPDF网 联系我们和版权申明