BA6208G-S08-R [UTC]
Disk Drive Motor Controller, 0.5A, BIPolar, PDSO8, HALOGEN AND LEAD FREE, SOP-8;型号: | BA6208G-S08-R |
厂家: | Unisonic Technologies |
描述: | Disk Drive Motor Controller, 0.5A, BIPolar, PDSO8, HALOGEN AND LEAD FREE, SOP-8 电动机控制 光电二极管 |
文件: | 总4页 (文件大小:181K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UNISONIC TECHNOLOGIES CO., LTD
BA6208
LINEAR INTEGRATED CIRCUIT
REVERSIBLE MOTOR DRIVER
DESCRIPTION
DIP-8
SIP-9
The UTC BA6208 is designed for driving reversible motor use, it
contain a logic section to controls forward and reverse rotations as
well as forced stop, and an output power section is able to supply an
output current of up to 100mA (typical) according to the logic control.
The IC allow control of reversible motors in cassette players and
other electrical equipment by using TTL-level logic signals.
FEATURES
* Recommended operating supply voltage range from 4.5V to15.0V.
* Built-in motor driving power transistors(typ.100mA).
* Brake is applied when stopping the motor (when Ain and Bin are
both HIGH level).
SOP-8
* Very low standby circuit current(when Ain and Bin are both LOW
level.
* Built-in diode to absorb surge currents.
* Direct control with the TTL logic.
ORDERING INFORMATION
Ordering Number
Package
Packing
Lead Free
Halogen Free
BA6208G-D08-T
BA6208G-G09-T
BA6208G-S08-R
BA6208L-D08-T
DIP-8
SIP-9
Tube
Tube
-
-
SOP-8
Tape Reel
MARKING
DIP-8
SIP-9
SOP-8
www.unisonic.com.tw
Copyright © 2015 Unisonic Technologies Co., Ltd
1 of 4
QW-R109-004.E
BA6208
LINEAR INTEGRATED CIRCUIT
PIN CONFIGURATION
For SIP-9 Package
1
2
3
4
5
6
7
8
9
NC BIN AIN NC GND VCC
AOUT NC
BOUT
For SOP-8/DIP-8 Package
VCC
1
8
7
AIN
GND
NC
BOUT
2
3
4
6
5
GND
BIN
AOUT
UNISONIC TECHNOLOGIES CO., LTD
2 of 4
QW-R109-004.E
www.unisonic.com.tw
BA6208
LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATING (TA=25C, unless otherwise specified)
PARAMETER
SYMBOL
VCC
RATINGS
18
UNIT
V
Power Supply Voltage
Maximum Output Current
IOUT(MAX
)
500
mA
mW
mW
mW
C
DIP-8
SIP-9
SOP-8
500
Power Dissipation
PD
700
450
Operating Temperature
Storage Temperature
TOPR
TSTG
-20 ~ +60
-55 ~ +125
C
Note Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
INPUT TRUTH TABLE
3pin (Ain)
2pin (Bin)
8pin (Aout)
7pin (Bout)
H
L
L
H
H
L
H
L
H
L
L
H
L
L
OPEN
OPEN
Note: HIGH level input is 2.0V or more.
LOW level input is 0.8V or less.
ELECTRICAL CHARACTERISTICS (TA=25C, VCC=9V, unless otherwise specified)
PARAMETER
SYMBOL
VCE
VIH
TEST CONDITIONS
IOUT=100mA
MIN
TYP MAX UNIT
Output Saturation Voltage
1.6
V
V
High
Low
2.0
Input Level Voltage
VIL
0.8
V
Output Current
IOUT
IST
200
mA
mA
μA
Standby Supply Current
Input High Level Current
Ain=Low, Bin= Low
VIH =4.5V
0.4
IIH
400
Note: A diode that absorbs at least 500mA is built in to give protection against surge currents with a pulse width of
10 ms and a duty ratio of 10% or less.
UNISONIC TECHNOLOGIES CO., LTD
3 of 4
QW-R109-004.E
www.unisonic.com.tw
BA6208
LINEAR INTEGRATED CIRCUIT
TEST CIRCUIT
Note: ( ): pin number of 8 pins package.
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
4 of 4
QW-R109-004.E
www.unisonic.com.tw
相关型号:
©2020 ICPDF网 联系我们和版权申明