DB106G [UTC]
GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER;
| 型号： | DB106G |
| 厂家： | 
Unisonic Technologies |
| 描述： | GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER 二极管 |
| 文件： | 总4页 (文件大小：213K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
UNISONIC TECHNOLOGIES CO., LTD
DB106G
DIODE
1.0A GLASS PASSIVATED
SINGLE-PHASE BRIDGE
RECTIFIER
+
DESCRIPTION
The UTC DB106G is a 1.0A glass passivated single-phase bridge
rectifier.
The UTC DB106G is suitable for automatic insertion.
DFM
FEATURES
* Surge overload ratings to 30 amperes peak
* Recommended for non-automatic applications
* Suitable for automatic insertion
* Glass passivated chip junctions
SYMBOL
ORDERING INFORMATION
Ordering Number
Lead Free
Package
DFM
Packing
Tube
Halogen Free
DB106GL-DFM-T
DB106GP-DFM-T
MARKING
www.unisonic.com.tw
Copyright © 2014 Unisonic Technologies Co., Ltd
1 of 4
QW-R227-002.A
DB106G
DIODE
ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise noted)
PARAMETER
SYMBOL
VRRM
RATINGS
800
UNIT
Repetitive Peak Reverse Voltage
RMS Voltage
V
V
V
VRMS
560
Continuous Reverse Voltage
VR
800
Forward Rectified Current
IO
1.0
50
A
0.06”(1.5mm) lead lenth at TA=40°C (Note 2)
Peak Forward Surge Current 8.3ms Single Half
Sine-Wave Superimposed on Rated Load
I2t Rating for Fusing
Operating Temperature
Storage Temperature
IFSM
A
t<8.3ms
I2t
TJ
10
A2s
°C
-65~+150
-65~+150
TSTG
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
THERMAL CHARACTERISTICS (Note 2)
PARAMETER
Junction to Ambient
SYMBOL
θJA
RATINGS
40
UNIT
°C/W
ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted)
PARAMETER
SYMBOL
VF
TEST CONDITIONS
IF=1.0A
MIN TYP MAX UNIT
Forward Voltage (t<8.3ms )
1.10
10
V
VR=VRRM, TA=25°C
VR=VRRM, TA=100°C
μA
DC Reverse Current at Rated DC Blocking
Voltage
IR
500 μA
Junction Capacitance Per Element (Note 1)
CJ
25
pF
Notes: 1. Measured at 1.0MHz and applied reverse voltage of 4.0V D.C.
2. Mounted on P.C.B with 0.51"×0.51"(13×13mm) copper pads.
UNISONIC TECHNOLOGIES CO., LTD
2 of 4
QW-R227-002.A
www.unisonic.com.tw
DB106G
DIODE
TYPICAL CHARACTERISTICS
Mximum Non-repetitive Surge Current
Forward Current Derating Curve
50
40
30
1.0
0.8
0.6
0.4
0.2
0.1
20
10
0
Pulse Wldth 8.3ms
SINGLE HALF-SINE-WAVE
(Jedec Method)
Single Phase Half
Wave 60Hz Resistive
or Inductive Load
100
50
1
2
10
20
5
100
0
150
50
Ambient Temperature, TA (°C)
Number Ofcycles At 60Hz
UNISONIC TECHNOLOGIES CO., LTD
3 of 4
QW-R227-002.A
www.unisonic.com.tw
DB106G
DIODE
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
4 of 4
QW-R227-002.A
www.unisonic.com.tw
相关型号：
DB106LS
SINGLE-PHASE GLASS PASSIVATED SILICON BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere
RECTRON
©2020 ICPDF网 联系我们和版权申明