LD1117AG-AD-SO8-D-R [UTC]
Adjustable Positive LDO Regulator, 1.3V Dropout, PDSO8, HALOGEN FREE, SOP-8;
| 型号： | LD1117AG-AD-SO8-D-R |
| 厂家： | 
Unisonic Technologies |
| 描述： | Adjustable Positive LDO Regulator, 1.3V Dropout, PDSO8, HALOGEN FREE, SOP-8 光电二极管 输出元件 调节器 |
| 文件： | 总15页 (文件大小：446K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
UNISONIC TECHNOLOGIES CO., LTD
LD1117/A
LINEAR INTEGRATED CIRCUIT
LOW DROP FIXED AND
ADJUSTABLE POSITIVE
VOLTAGE REGULATORS
DESCRIPTION
The UTC LD1117/A is a low dropout, 3-terminal positive
voltage regulator designed to provide output current up to
800mA/1A, There are adjustable version (VREF=1.25V) and various
fixed versions.
FEATURES
* Low dropout voltage
* Suitable for SCSI-2 active termination if VOUT set to 2.85V
* Output current up to 0.8A for 1117 and 1.0A for 1117A
* Built-in current limit and over temperature protection
* Available in ±1%(at 25°C) and 2% in all temperature range
* Low current consumption
Lead-free:
LD1117L-xx / LD1117AL-xx
Halogen-free: LD1117G-xx / LD1117AG-xx
* Support MLCC
ORDERING INFORMATION
Ordering Number
Lead Free
d
Package
Packing
Pin Assignment
Normal
Halogen Free
LD1117c-xx-AA3-d-e LD1117cL-xx-AA3-d-eLD1117cG-xx-AA3-d-e SOT-223
LD1117c-xx-AB3-d-e LD1117cL-xx-AB3-d-eLD1117cG-xx-AB3-d-e SOT-89
LD1117c-xx-TA3-d-e LD1117cL-xx-TA3-d-e LD1117cG-xx-TA3-d-e TO-220
LD1117c-xx-TF3-d-e LD1117cL-xx-TF3-d-e LD1117cG-xx-TF3-d-e TO-220F
LD1117c-xx-TN3-d-e LD1117cL-xx-TN3-d-eLD1117cG-xx-TN3-d-e TO-252
LD1117c-xx-TQ2-d-e LD1117cL-xx-TQ2-d-eLD1117cG-xx-TQ2-d-e TO-263
LD1117c-xx-TQ3-d-e LD1117cL-xx-TQ3-d-eLD1117cG-xx-TQ3-d-e TO-263-3
LD1117c-xx-S08-d-e LD1117cL-xx-S08-d-e LD1117cG-xx-S08-d-e SOP-8
Note: Pin Assignment: I:VIN O:VOUT G:GND/ADJ
A: GOI
B: OGI
C: GIO
D: IGO
R: Tape Reel
T: Tube
GOOIxOOx
www.unisonic.com.tw
1 of 15
Copyright © 2011 Unisonic Technologies Co., Ltd
QW-R102-006.AC
LD1117/A
LINEAR INTEGRATED CIRCUIT
MARKING INFORMATION
PACKAGE
VOLTAGE CODE
MARKING
SOT-89
12 :1.2V
15 :1.5V
18 :1.8V
25 :2.5V
2J :2.85V
30 :3.0V
33 :3.3V
36 :3.6V
50 :5.0V
AD :ADJ
SOT-223
TO-220
TO-220F
TO-252
TO-263
TO-263-3
Note: Current code: Blank: 0.8A
A: 1A
PIN CONFIGURATION of SOP-8
GND/
ADJ
1
NC
8
7
VOUT
VOUT
NC
VOUT
VOUT
VIN
2
3
4
6
5
UNISONIC TECHNOLOGIES CO., LTD
2 of 15
QW-R102-006.AC
www.unisonic.com.tw
LD1117/A
LINEAR INTEGRATED CIRCUIT
BLOCK DIAGRAM
UNISONIC TECHNOLOGIES CO., LTD
3 of 15
QW-R102-006.AC
www.unisonic.com.tw
LD1117/A
LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATINGS (Ta=25°C)
PARAMETER
SYMBOL
VIN
RATINGS
18
UNIT
V
DC Input Voltage
Power Dissipation
PD
Internally limited
+150
Junction Temperature
Storage temperature
TJ
°C
°C
TSTG
-65 ~ +150
Note Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
RECOMMENDED OPERATING RATINGS
PARAMETER
SYMBOL
RATINGS
15
UNIT
V
Input Voltage
VIN
TJ
Operating Junction Temperature Range
0 ~ +125
°C
THERMAL DATA
PARAMETER
SYMBOL
RATINGS
165
180
150
112
54
UNIT
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
SOT-223
SOT-89
SOP-8
Junction to Ambient
θJA
TO-252
TO-220
TO-263
SOT-223
SOT-89
SOP-8
64
15
50
20
Junction to Case
θJC
TO-252
TO-220
TO-263
12
4
4
UNISONIC TECHNOLOGIES CO., LTD
4 of 15
QW-R102-006.AC
www.unisonic.com.tw
LD1117/A
LINEAR INTEGRATED CIRCUIT
ELECTRICAL CHARACTERISTICS
(Ta=25°C, refer to the test circuits, TJ=0 to 125°C, Co=10μF unless otherwise specified)
For LD1117/A-1.2
PARAMETER
Output Voltage
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
1.224
UNIT
V
VOUT VIN=3.2V, IOUT=10mA, TJ=25°C
VIN=2.7 to 8V
1.176
1.200
Output Voltage
Line Regulation
Load Regulation
VOUT LD1117 : IOUT=10~800mA
LD1117A : IOUT=10~1000mA
ΔVOUT VIN=2.7 to 8V, IOUT=10mA
VIN=2.7V
ΔVOUT LD1117 : IOUT=10~800mA
LD1117A : IOUT=10~1000mA
ΔVOUT
1.176
1.200
1.224
6
V
1
1
mV
mV
10
Temperature stability
Long Term Stability
Operating Input Voltage
Quiescent Current
0.5
0.3
%
%
ΔVOUT 1000 hrs, TJ=125°C
VIN
IQ
IOUT=100mA
15
10
V
VIN≤10V
5
mA
LD1117
800
Current Limit
ILIMIT VIN=6.2V, TJ=25°C
mA
LD1117A 1000
Minimum Load Current
Output Noise Voltage
IO(MIN) VIN=15V
2
5
mA
eN
B=10Hz to 10KHz, TJ=25°C
100
μV
I
OUT=40mA, f=120Hz, TJ=25°C,
Supply Voltage Rejection
SVR
60
75
dB
VIN=4.2V, VRIPPLE=1Vpp
IOUT=100mA
IOUT=500mA
IOUT=800mA
1.00
1.15
1.20
1.20
0.01
1.10
1.25
1.30
1.30
0.10
Dropout Voltage
VD
V
I
OUT=1A
Thermal Regulation
Ta=25°C, 30ms Pulse
%/W
For LD1117/A-1.5
PARAMETER
Output Voltage
SYMBOL
TEST CONDITIONS
MIN
TYP
MAX
UNIT
V
VOUT VIN=3.5V, IOUT=10mA, TJ=25°C
VIN=3 to 8V
1.470
1.500
1.530
Output Voltage
Line Regulation
Load Regulation
VOUT LD1117 : IOUT=0~800mA
LD1117A : IOUT=0~1000mA
ΔVOUT VIN=3 to 8V, IOUT=0mA
VIN=3V
ΔVOUT LD1117 : IOUT=0~800mA
LD1117A : IOUT=0~1000mA
ΔVOUT
1.470
1.500
1.530
6
V
1
1
mV
mV
10
Temperature stability
Long Term Stability
Operating Input Voltage
Quiescent Current
0.5
0.3
%
%
ΔVOUT 1000 hrs, TJ=125°C
VIN
IQ
IOUT=100mA
15
10
V
VIN≤10V
5
mA
LD1117
LD1117A 1000
B=10Hz to 10KHz, TJ=25°C
800
Current Limit
ILIMIT VIN=6.5V, TJ=25°C
mA
μV
dB
Output Noise Voltage
Supply Voltage Rejection
eN
100
75
I
OUT=40mA, f=120Hz, TJ=25°C,
SVR
60
VIN=4.5V, VRIPPLE=1Vpp
IOUT=100mA
IOUT=500mA
IOUT=800mA
1.00
1.15
1.20
1.20
0.01
1.10
1.25
1.30
1.30
0.10
Dropout Voltage
VD
V
I
OUT=1A
Thermal Regulation
Ta=25°C, 30ms Pulse
%/W
UNISONIC TECHNOLOGIES CO., LTD
5 of 15
QW-R102-006.AC
www.unisonic.com.tw
LD1117/A
LINEAR INTEGRATED CIRCUIT
ELECTRICAL CHARACTERISTICS(Cont.)
For LD1117/A-1.8
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
1.836
UNIT
V
Output Voltage
Output Voltage
Line Regulation
Load Regulation
VOUT VIN=3.8V, IOUT=10mA, TJ=25°C
VIN=3.3 to 8V
VOUT LD1117 : IOUT=0~800mA
LD1117A : IOUT=0~1000mA
ΔVOUT VIN=3.3 to 8V, IOUT=0mA
VIN=3.3V
ΔVOUT LD1117 : IOUT=0~800mA
LD1117A : IOUT=0~1000mA
ΔVOUT
1.764
1.800
1.764
1.800
1.836
6
V
1
1
mV
mV
10
Temperature stability
Long Term Stability
Operating Input Voltage
Quiescent Current
0.5
0.3
%
%
ΔVOUT 1000 hrs, TJ=125°C
VIN
IQ
IOUT=100mA
15
10
V
VIN≤10V
5
mA
LD1117
LD1117A 1000
B=10Hz to 10KHz, TJ=25°C
800
Current Limit
ILIMIT VIN=6.8V, TJ=25°C
mA
μV
dB
Output Noise Voltage
Supply Voltage Rejection
eN
100
75
I
OUT=40mA, f=120Hz, TJ=25°C,
SVR
60
VIN=5.5V, VRIPPLE=1Vpp
IOUT=100mA
IOUT=500mA
IOUT=800mA
1.00
1.15
1.20
1.20
0.01
1.10
1.25
1.30
1.30
0.10
Dropout Voltage
VD
V
I
OUT=1A
Thermal Regulation
Ta=25°C, 30ms Pulse
%/W
For LD1117/A-2.5
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
2.550
UNIT
V
Output Voltage
VOUT VIN=4.5V, IOUT=10mA, TJ=25°C
VIN=3.9 to 10V
2.450
2.500
Output Voltage
Line Regulation
Load Regulation
VOUT LD1117 : IOUT=0~800mA
LD1117A : IOUT=0~1000mA
ΔVOUT VIN=3.9 to 10V, IOUT=0mA
VIN=3.9V
ΔVOUT LD1117 : IOUT=0~800mA
LD1117A : IOUT=0~1000mA
ΔVOUT
2.450
2.500
2.550
6
V
1
1
mV
mV
10
Temperature stability
Long Term Stability
Operating Input Voltage
Quiescent Current
0.5
0.3
%
%
ΔVOUT 1000 hrs, TJ=125°C
VIN
IQ
IOUT=100mA
15
10
V
VIN≤10V
5
mA
LD1117
LD1117A 1000
B=10Hz to 10KHz, TJ=25°C
800
Current Limit
ILIMIT VIN=7.5V, TJ=25°C
mA
μV
dB
Output Noise Voltage
Supply Voltage Rejection
eN
100
75
I
OUT=40mA, f=120Hz, TJ=25°C,
SVR
60
VIN=5.5V, VRIPPLE =1Vpp
IOUT=100mA
IOUT=500mA
IOUT=800mA
1.00
1.15
1.20
1.20
0.01
1.10
1.25
1.30
1.30
0.10
Dropout Voltage
VD
V
I
OUT=1A
Thermal Regulation
Ta=25°C, 30ms Pulse
%/W
UNISONIC TECHNOLOGIES CO., LTD
6 of 15
QW-R102-006.AC
www.unisonic.com.tw
LD1117/A
LINEAR INTEGRATED CIRCUIT
ELECTRICAL CHARACTERISTICS(Cont.)
For LD1117/A-2.85
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
TYP
MAX
UNIT
V
Output Voltage
Output Voltage
Line Regulation
Load Regulation
VOUT VIN=4.85V, IOUT=10mA, TJ=25°C
VIN=4.25 to 10V
VOUT LD1117 : IOUT=0~800mA
LD1117A : IOUT=0~1000mA
ΔVOUT VIN=4.25 to 10V, IOUT=0mA
VIN=4.25V
ΔVOUT LD1117 : IOUT=0~800mA
LD1117A : IOUT=0~1000mA
ΔVOUT
2.793
2.850
2.907
2.793
2.850
2.907
6
V
1
1
mV
mV
10
Temperature stability
Long Term Stability
Operating Input Voltage
Quiescent Current
0.5
0.3
%
%
ΔVOUT 1000 hrs, TJ=125°C
VIN
IQ
IOUT=100mA
15
10
V
VIN≤10V
5
mA
LD1117
LD1117A 1000
B=10Hz to 10KHz, TJ=25°C
800
Current Limit
ILIMIT VIN=7.85V, TJ=25°C
mA
μV
dB
Output Noise Voltage
Supply Voltage Rejection
eN
100
75
I
OUT=40mA, f=120Hz, TJ=25°C,
SVR
60
VIN=5.85V, VRIPPLE=1Vpp
IOUT=100mA
IOUT=500mA
IOUT=800mA
1.00
1.15
1.20
1.20
0.01
1.10
1.25
1.30
1.30
0.10
Dropout Voltage
VD
V
I
OUT=1A
Thermal Regulation
Ta=25°C, 30ms Pulse
%/W
For LD1117/A-3.0
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
3.060
UNIT
V
Output Voltage
VOUT VIN=5V, IOUT=10mA, TJ=25°C
VIN=4.5 to 10V
2.940
3.000
Output Voltage
Line Regulation
Load Regulation
VOUT LD1117 : IOUT=0~800mA
LD1117A : IOUT=0~1000mA
ΔVOUT VIN=4.5 to 12V, IOUT=0mA
VIN=4.5V
ΔVOUT LD1117 : IOUT=0~800mA
LD1117A : IOUT=0~1000mA
ΔVOUT
2.940
3.000
3.060
6
V
1
1
mV
mV
10
Temperature stability
Long Term Stability
Operating Input Voltage
Quiescent Current
0.5
0.3
%
%
ΔVOUT 1000 hrs, TJ=125°C
VIN
IQ
IOUT=100mA
15
10
V
VIN≤15V
5
mA
LD1117
LD1117A 1000
B=10Hz to 10KHz, TJ=25°C
800
Current Limit
ILIMIT VIN=8V, TJ=25°C
mA
μV
dB
Output Noise Voltage
Supply Voltage Rejection
eN
100
75
I
OUT=40mA, f=120Hz, TJ=25°C,
SVR
60
VIN=6V, VRIPPLE=1Vpp
IOUT=100mA
IOUT=500mA
IOUT=800mA
1.00
1.15
1.20
1.20
0.01
1.10
1.25
1.30
1.30
0.10
Dropout Voltage
VD
V
I
OUT=1A
Thermal Regulation
Ta=25°C, 30ms Pulse
%/W
UNISONIC TECHNOLOGIES CO., LTD
7 of 15
QW-R102-006.AC
www.unisonic.com.tw
LD1117/A
LINEAR INTEGRATED CIRCUIT
ELECTRICAL CHARACTERISTICS(Cont.)
For LD1117/A-3.3
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
3.366
UNIT
V
Output Voltage
Output Voltage
Line Regulation
Load Regulation
VOUT VIN=5.3V, IOUT=10mA, TJ=25°C
3.234
3.300
VIN=4.75 to 10V
LD1117 : IOUT=0~800mA
LD1117A : IOUT=0~1000mA
VOUT
3.234
3.300
3.366
6
V
ΔVOUT VIN=4.75 to 15V, IOUT=0mA
VIN=4.75V
ΔVOUT LD1117 : IOUT=0~800mA
LD1117A : IOUT=0~1000mA
ΔVOUT
ΔVOUT 1000 hrs, TJ=125°C
VIN
IQ
1
1
mV
mV
10
Temperature stability
Long Term Stability
Operating Input Voltage
Quiescent Current
0.5
0.3
%
%
IOUT=100mA
15
10
V
VIN≤15V
5
mA
LD1117
LD1117A 1000
B=10Hz to 10KHz, TJ=25°C
800
Current Limit
ILIMIT VIN=8.3V, TJ=25°C
mA
μV
dB
Output Noise Voltage
Supply Voltage Rejection
eN
100
75
I
OUT=40mA, f=120Hz, TJ=25°C,
SVR
60
VIN=6.3V, VRIPPLE=1Vpp
IOUT=100mA
IOUT=500mA
IOUT=800mA
1.00
1.15
1.20
1.20
0.01
1.10
1.25
1.30
1.30
0.10
Dropout Voltage
VD
V
I
OUT=1A
Thermal Regulation
TA=25°C, 30ms Pulse
%/W
For LD1117/A-3.6
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
3.672
UNIT
V
Output Voltage
VOUT VIN=5.6V, IOUT=10mA, TJ=25°C
VIN=5 to 10V
3.528
3.600
Output Voltage
Line Regulation
Load Regulation
VOUT LD1117 : IOUT=0~800mA
LD1117A : IOUT=0~1000mA
ΔVOUT VIN=5 to 15V, IOUT=0mA
VIN=5V
ΔVOUT LD1117 : IOUT=0~800mA
LD1117A : IOUT=0~1000mA
ΔVOUT
3.528
3.600
3.672
6
V
1
1
mV
mV
10
Temperature stability
Long Term Stability
Operating Input Voltage
Quiescent Current
0.5
0.3
%
%
ΔVOUT 1000 hrs, TJ=125°C
VIN
IQ
IOUT=100mA
15
10
V
VIN≤15V
5
mA
LD1117
LD1117A 1000
B=10Hz to 10KHz, TJ=25°C
800
Current Limit
ILIMIT VIN=8.6V, TJ=25°C
mA
μV
dB
Output Noise Voltage
Supply Voltage Rejection
eN
100
75
I
OUT=40mA, f=120Hz, TJ=25°C,
SVR
60
VIN=6.6V, VRIPPLE=1Vpp
IOUT=100mA
IOUT=500mA
IOUT=800mA
1.00
1.15
1.20
1.20
0.01
1.10
1.25
1.30
1.30
0.10
Dropout Voltage
VD
V
I
OUT=1A
Thermal Regulation
TA=25°C, 30ms Pulse
%/W
UNISONIC TECHNOLOGIES CO., LTD
8 of 15
QW-R102-006.AC
www.unisonic.com.tw
LD1117/A
LINEAR INTEGRATED CIRCUIT
ELECTRICAL CHARACTERISTICS(Cont.)
For LD1117/A-5.0
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
5.100
UNIT
V
Output Voltage
Output Voltage
Line Regulation
Load Regulation
VOUT VIN=7V, IOUT=10mA, TJ=25°C
4.900
5.000
VIN=6.5 to 15V
LD1117 : IOUT=0~800mA
LD1117A : IOUT=0~1.0A
VOUT
4.900
5.000
5.100
10
V
ΔVOUT VIN=6.5 to 15V, IOUT=0mA
VIN=6.5V
ΔVOUT LD1117 : IOUT=0~800mA
LD1117A : IOUT=0~1000mA
ΔVOUT
ΔVOUT 1000 hrs, TJ=125°C
VIN
IQ
1
1
mV
mV
15
Temperature stability
Long Term Stability
Operating Input Voltage
Quiescent Current
0.5
0.3
%
%
IOUT=100mA
15
10
V
VIN≤15V
5
mA
LD1117
LD1117A 1000
B=10Hz to 10KHz, TJ=25°C
IOUT=40mA, f=120Hz, TJ=25°C,
800
Current Limit
ILIMIT VIN=10V, TJ=25°C
mA
μV
dB
Output Noise Voltage
Supply Voltage Rejection
eN
100
75
SVR
60
VIN=8V, VRIPPLE=1Vpp
IOUT=100mA
1.00
1.15
1.20
1.20
0.01
1.10
1.25
1.30
1.30
0.10
IOUT=500mA
Dropout Voltage
VD
V
IOUT=800mA
I
OUT=1A
Thermal Regulation
TA=25°C, 30ms Pulse
%/W
For LD1117/A-ADJ
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
TYP
1.25
MAX
UNIT
V
Reference Voltage
VREF VIN-VOUT=2V, IOUT=10mA, TJ=25°C
VIN-VOUT=1.4 to 10V
1.225
1.275
Reference Voltage
Line Regulation
Load Regulation
VREF LD1117 : IOUT=10~800mA
LD1117A : IOUT=10~1000mA
ΔVOUT VIN-VOUT=1.5 to 13.75V, IOUT=10mA
VIN-VOUT=3V
ΔVOUT LD1117 : IOUT=10~800mA
LD1117A : IOUT=10~1000mA
ΔVOUT
1.225
1.25
0.035
0.1
1.275
0.2
V
%
%
0.4
Temperature stability
Long Term Stability
0.50
0.3
%
%
V
ΔVOUT 1000 hrs, TJ=125°C
VIN
Operating Input Voltage
Adjustment Pin Current
15
IADJ
VIN≤15V
60
1
120
μA
VIN-VOUT=1.4 to 10V,
Adjustment Pin Current Change
ΔIADJ LD1117 : IOUT=10 ~ 800mA
LD1117A : IOUT=10 ~ 1000mA
IO(MIN) VIN=15V
5
5
μA
Minimum Load Current
Current Limit
2
mA
mA
%
LD1117
800
ILIMIT VIN-VOUT=5V, TJ=25°C
LD1117A 1000
Output Noise (%Vo)
Supply Voltage Rejection
eN
B=10Hz to 10KHz, TJ=25°C
0.003
75
IOUT=40mA, f=120Hz, TJ=25°C,
VIN-VOUT=3V, VRIPPLE=1Vpp
IOUT=100mA
SVR
60
dB
1.00
1.15
1.20
1.20
0.01
1.10
1.25
1.30
1.30
0.10
IOUT=500mA
Dropout Voltage
VD
V
IOUT=800mA
I
OUT=1A
Thermal Regulation
TA=25°C, 30ms Pulse
%/W
UNISONIC TECHNOLOGIES CO., LTD
9 of 15
QW-R102-006.AC
www.unisonic.com.tw
LD1117/A
LINEAR INTEGRATED CIRCUIT
TYPICAL APPLICATIONS
UTC LD1117/A-XX
IN
VIN
VOUT
OUT
GND/ADJ
+
+
100µF
10µF
Fig.1 Tyncal Application Circuit
UTC LD1117/A-XX
VIN
VOUT
IN
OUT
GND/ADJ
10µF
10µF
Fig.2 Tyncal Application Circuit (FOR MLCC)
Fig.3 Negative Supply
UNISONIC TECHNOLOGIES CO., LTD
10 of 15
QW-R102-006.AC
www.unisonic.com.tw
LD1117/A
LINEAR INTEGRATED CIRCUIT
Fig.4 Active Terminator for SCSI-2 BUS
Fig.5 Circuit for Increasing Output Voltage
UNISONIC TECHNOLOGIES CO., LTD
11 of 15
QW-R102-006.AC
www.unisonic.com.tw
LD1117/A
LINEAR INTEGRATED CIRCUIT
APPLICATION NOTE of LD1117/A ADJUSTABLE
The LD1117/A adjustable has a reference voltage of between the OUT and ADJ/GND pins. IADJ is 60μA typ.
(120µA max.) and ΔIADJ is 1μA typ. (5µA max.).
R1 is normally fixed to 120Ω.
From figure 4 we obtain:
VOUT=VREF+R2(IADJ+IR1)=VREF + R2(IADJ+VREF/R1)=VREF(1+R2/R1) + R2 x IADJ.
Usually R2 value is in the range of few KΩ, so the R2 X IADJ product could be neglected; then the above
expression becomes: VOUT=VREF(1+R2/R1)
For better load regulation, realize a good Kelvin connection of R1 and R2 is important. Particularly R1
connection must be realized very close to OUT and ADJ/GND pin, while R2 ground connection must be placed
as near as possible to the negative Load pin. Ripple rejection can be improved by introducing a 10μF
electrolytic capacitor placed in parallel to the R2 resistor (See Fig. 8)
Fig.6 Adjustable Output Voltage Application Circuit
Fig.7 Adjustable Output Voltage Application Circuit (FOR MLCC)
Fig.8 Adjustable Output Voltage Application with improved Ripple Rejection.
UNISONIC TECHNOLOGIES CO., LTD
12 of 15
QW-R102-006.AC
www.unisonic.com.tw
LD1117/A
LINEAR INTEGRATED CIRCUIT
TYPICAL CHARACTERISTICS
UNISONIC TECHNOLGIES CO., LTD
13 of 15
QW-R102-006.AC
www.unisonic.com.tw
LD1117/A
LINEAR INTEGRATED CIRCUIT
TYPICAL CHARACTERISTICS(Cont.)
Load Regulation
Short-Circuit Current
2.8
2.4
2.0
1.6
0.16
ΔILOAD=1A
0.12
0.08
0.04
TJ=125°C
TJ=25°C
1.2
0.8
0
-0.04
-0.08
-0.12
0.4
0
0
5
10
-50 -25
0
25
50
75 100 125
Input/Output Differential (V)
Temperature (°C)
Output Voltage vs. Temperautre
VOUT Set With 1% Resistors
Reference Voltge vs. Temperature
3.70
3.65
3.60
3.55
3.50
3.45
3.40
1.255
1.250
1.245
1.240
1.235
1.230
1.225
1.220
1.215
VOUT=3.3V
3.35
3.30
1.210
1.205
3.25
3.20
-75 -50 -25
0
25 50 75 100 125 150 175
-75
-25
0 25 50 75 100 125 150 175
-50
Junction Temperature(°C)
Junction Temperature, TJ(°C)
Maximum Power Dissipation
Output Voltage vs. Temperautre
VOUT Set With 1% Resistors
10
8
2.05
2.00
1.95
1.90
1.85
1.80
1.75
TO-263 & TO-252
6
4
SOT-223
1.70
1.65
VOUT=1.8V
2
0
1.60
1.55
25
45
65
85
105
125
-75 -50 -25
0
25 50 75 100 125 150 175
Case Temperature, TC(°C)
Junction Temperature, TJ(°C)
UNISONIC TECHNOLOGIES CO., LTD
14 of 15
QW-R102-006.AC
www.unisonic.com.tw
LD1117/A
LINEAR INTEGRATED CIRCUIT
TYPICAL CHARACTERISTICS(Cont.)
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
15 of 15
QW-R102-006.AC
www.unisonic.com.tw
相关型号：
LD1117AG-AD-TA3-C-R
Adjustable Positive LDO Regulator, 1.3V Dropout, PSFM3, HALOGEN FREE, TO-220, 3 PIN
UTC
LD1117AG-AD-TA3-C-T
Adjustable Positive LDO Regulator, 1.3V Dropout, PSFM3, HALOGEN FREE, TO-220, 3 PIN
UTC
LD1117AG-AD-TA3-D-T
Adjustable Positive LDO Regulator, 1.3V Dropout, PSFM3, HALOGEN FREE, TO-220, 3 PIN
UTC
©2020 ICPDF网 联系我们和版权申明