LD2127 [UTC]

LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS;
LD2127
型号: LD2127
厂家: Unisonic Technologies    Unisonic Technologies
描述:

LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS

文件: 总6页 (文件大小:210K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
UNISONIC TECHNOLOGIES CO., LTD  
LD2127/A  
Preliminary  
LINEAR INTEGRATED CIRCUIT  
LOW DROP FIXED AND  
ADJUSTABLE POSITIVE  
VOLTAGE REGULATORS  
DESCRIPTION  
1
The UTC LD2127/A is a low dropout, 3-terminal positive  
SOT-223  
voltage regulator designed to provide output current up to  
800mA/1A, There are adjustable versions (VREF=1.0V) and  
various fixed versions.  
FEATURES  
* Low dropout voltage  
* Suitable for SCSI-2 active termination if VOUT set to 2.85V  
* Output current up to 0.8A for 2127 and 1.0A for 2127A  
* Built-in current limit and over temperature protection  
* Ultra low Adjustment Current (7μA typ.)  
* Ultra low minimum Load (0.3mA typ.)  
* Stable with low ESR ceramic output capacitor (MLCC)  
ORDERING INFORMATION  
Ordering Number  
Pin Assignment  
A: AOI  
Package  
SOT-223  
Packing  
Lead Free  
Halogen Free  
B: OAI  
C: AIO  
LD2127L-xx-AA3--R  
LD2127G-xx-AA3--R  
Tape Reel  
D: IAO  
Note: Pin Assignment: I: VIN O: VOUT  
A: ADJ  
LD2127 1 L-xx-AA3- 2 - R  
(1) R: Tape Reel  
(1)Packing Type  
(2)Pin Assignment  
(3)Package Type  
(4)Output Voltage Code  
(5)Lead Free  
(2) refer to Pin Assignment  
(3) AA3: SOT-223  
(4) xx: refer to Marking Information  
(5) L: Lead Free, G: Halogen Free  
(6) Blank: 800mA, A: 1A  
(6)Current Code  
www.unisonic.com.tw  
Copyright © 2013 Unisonic Technologies Co., Ltd  
1 of 6  
QW-R102-054.a  
LD2127/A  
Preliminary  
LINEAR INTEGRATED CIRCUIT  
MARKING INFORMATION  
PACKAGE  
VOLTAGE CODE  
MARKING  
L: Lead Free  
G: Halogen Free  
Pin Code  
Current Code  
Voltage Code  
LD2127  
XX  
SOT-223  
AD :ADJ  
Date Code  
1
2
3
BLOCK DIAGRAM  
UNISONIC TECHNOLOGIES CO., LTD  
2 of 6  
QW-R102-054.a  
www.unisonic.com.tw  
LD2127/A  
Preliminary  
LINEAR INTEGRATED CIRCUIT  
ABSOLUTE MAXIMUM RATING (TA=25°C)  
PARAMETER SYMBOL  
RATINGS  
18  
UNIT  
V
DC Input Voltage  
VIN  
PD  
Power Dissipation  
Internally limited  
+150  
W
Junction Temperature  
Storage temperature  
TJ  
°C  
TSTG  
-65 ~ +150  
°C  
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.  
Absolute maximum ratings are stress ratings only and functional device operation is not implied.  
RECOMMENDED OPERATING RATINGS  
PARAMETER  
SYMBOL  
RATINGS  
15  
UNIT  
V
Input Voltage  
VIN  
TJ  
Operating Junction Temperature  
0 ~ +125  
°C  
THERMAL DATA  
PARAMETER  
SYMBOL  
θJA  
RATINGS  
165  
UNIT  
°C/W  
°C/W  
Junction to Ambient  
Junction to Case  
θJC  
15  
ELECTRICAL CHARACTERISTICS  
(TA=25°C, refer to the test circuits, TJ=0 ~ 125°C, CO=10μF unless otherwise specified)  
For LD2127/A-ADJ  
PARAMETER  
Reference Voltage  
SYMBOL  
TEST CONDITIONS  
MIN  
0.98  
TYP  
1.0  
MAX  
1.02  
UNIT  
VREF VIN-VOUT=2V, IOUT=10mA, TJ=25°C  
V
VIN-VOUT=1.4~10V  
VREF  
Reference Voltage  
Line Regulation  
0.98  
1.0  
0.5  
1.02  
V
LD2127A : IOUT=10~1000mA  
VOUT VIN-VOUT=1.5 ~ 13.75V, IOUT=10mA  
VIN-VOUT=3V  
%
Load Regulation  
VOUT LD2127 : IOUT=10~800mA  
LD2127A : IOUT=10~1000mA  
VOUT  
2.0  
%
Temperature stability  
Long Term Stability  
0.50  
0.3  
%
%
V
VOUT 1000 hrs, TJ=125°C  
VIN  
Operating Input Voltage  
Adjustment Pin Current  
15  
10  
IADJ  
VIN15V  
7
μA  
VIN-VOUT=1.4~10V,  
LD2127A : IOUT=10 ~ 1000mA  
Adjustment Pin Current Change  
Minimum Load Current  
Current Limit  
IADJ  
0.3  
0.3  
2
1
μA  
mA  
mA  
%
IO(MIN) VIN=15V  
800  
LD2127  
ILIMIT VIN-VOUT=5V, TJ=25°C  
1000  
LD2127A  
Output Noise (%VO)  
eN  
B=10Hz ~ 10KHz, TJ=25°C  
0.003  
IOUT=40mA, f=120Hz, TJ=25°C,  
VIN-VOUT=3V, VRIPPLE=1VPP  
Supply Voltage Rejection  
SVR  
75  
dB  
I
OUT=100mA  
1.05  
1.15  
1.18  
1.22  
0.01  
150  
1.15  
1.25  
1.28  
1.35  
0.10  
IOUT=500mA  
Dropout Voltage  
VD  
V
IOUT=800mA  
IOUT=1A  
Thermal Regulation  
Thermal Shutdown  
TA=25°C, 30ms Pulse  
%/W  
°C  
OTP  
UNISONIC TECHNOLOGIES CO., LTD  
3 of 6  
QW-R102-054.a  
www.unisonic.com.tw  
LD2127/A  
Preliminary  
LINEAR INTEGRATED CIRCUIT  
APPLICATION NOTE of LD2127/A ADJUSTABLE  
The LD2127/A adjustable has a reference voltage of between the OUT and ADJ pins. IADJ is 7μA typ. (10μA  
max.) and IADJ is 0.3μA typ. (2µA max.).  
R1 is normally fixed to 1.2k.  
From figure 1 we obtain:  
VOUT=VREF+R2(IADJ+IR1)=VREF + R2(IADJ+VREF/R1)=VREF(1+R2/R1) + R2 × IADJ.  
Usually R2 value is in the range of few K, so the R2 X IADJ product could be neglected; then the above  
expression becomes: VOUT=VREF(1+R2/R1)  
For better load regulation, realize a good Kelvin connection of R1 and R2 is important. Particularly R1 connection  
must be realized very close to OUT and ADJ pin, while R2 ground connection must be placed as near as possible to  
the negative Load pin. Ripple rejection can be improved by introducing a 10μF electrolytic capacitor placed in  
parallel to the R2 resistor (See Fig. 2)  
The UTC LD2127/A also supports MLCC. See Fig.3 for adjustable output.  
UTC LD2127/A  
VIN  
VOUT  
IN  
OUT  
+
+
ADJ  
10µF  
10µF  
R1  
1.2k  
VREF  
R2  
Fig.1 Adjustable Output Voltage Application Circuit  
Fig.2 Adjustable Output Voltage Application with improved Ripple Rejection.  
UNISONIC TECHNOLOGIES CO., LTD  
4 of 6  
QW-R102-054.a  
www.unisonic.com.tw  
LD2127/A  
Preliminary  
LINEAR INTEGRATED CIRCUIT  
APPLICATION NOTE of LD2127/A ADJUSTABLE(Cont.)  
UTC LD2127/A  
IN  
VIN  
VOUT  
OUT  
ADJ  
10µF  
10µF  
R1  
1.2kΩ  
VREF  
R2  
Fig.3 Adjustable Output Voltage Application Circuit for MLCC  
UNISONIC TECHNOLOGIES CO., LTD  
5 of 6  
QW-R102-054.a  
www.unisonic.com.tw  
LD2127/A  
Preliminary  
LINEAR INTEGRATED CIRCUIT  
TYPICAL CHARACTERISTICS  
UTC assumes no responsibility for equipment failures that result from using products at values that  
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or  
other parameters) listed in products specifications of any and all UTC products described or contained  
herein. UTC products are not designed for use in life support appliances, devices or systems where  
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in  
whole or in part is prohibited without the prior written consent of the copyright owner. The information  
presented in this document does not form part of any quotation or contract, is believed to be accurate  
and reliable and may be changed without notice.  
UNISONIC TECHNOLOGIES CO., LTD  
6 of 6  
QW-R102-054.a  
www.unisonic.com.tw  

相关型号:

LD2127A

LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS
UTC

LD2127AG-AD-AA3-A-R

LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS
UTC

LD2127AL-AD-AA3-A-R

LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS
UTC

LD2127AL-AD-AA3-B-R

LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS
UTC

LD2127AL-AD-AA3-C-R

LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS
UTC

LD2127AL-AD-AA3-D-R

LOW DROP FIXED AND ADJUSTABLE POSITIVE VOLTAGE REGULATORS
UTC

LD2129F-A01

Telecom and Datacom Connector, 29 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
FOXCONN

LD2129F-A04

Telecom and Datacom Connector, 29 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
FOXCONN

LD2129H-A01

Telecom and Datacom Connector, 29 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
FOXCONN

LD2129H-A04

Telecom and Datacom Connector, 29 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
FOXCONN

LD2129V-A01

Telecom and Datacom Connector, 29 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
FOXCONN

LD2129V-A04

Telecom and Datacom Connector, 29 Contact(s), Female, Right Angle, Surface Mount Terminal, Receptacle, ROHS COMPLIANT
FOXCONN