LR1108G-18-K08-3030-R [UTC]
Fixed Positive LDO Regulator,;型号: | LR1108G-18-K08-3030-R |
厂家: | Unisonic Technologies |
描述: | Fixed Positive LDO Regulator, 输出元件 调节器 |
文件: | 总9页 (文件大小:291K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UNISONIC TECHNOLOGIES CO., LTD
LR1108/E
CMOS IC
1A FAST ULTRA LOW
DROPOUT LINEAR
REGULATOR
1
1
SOT-223
3
TO-252
4
5
DESCRIPTION
The UTC LR1108/E is an ultra low-dropout linear regulators.
3
2
2
1
Wide output voltage range options are available. The fast
response characteristic to make UTC LR1108/E suitable for low
voltage microprocessor application. The low quiescent current
operation and low dropout quality caused by the CMOS process.
The UTC LR1108/E has ultra low dropout voltage
300mV at 1A load current typically.
1
SOT-23
SOT-25
1
(EIAJ SC-59)
The ground pin current is typically 150uA at 1mA load current.
1
ERROR Flag: When the output voltage drops 10% below
nominal value Error flag goes low.
DFN3030-8
SOT-89
SET/ADJ Mode (for LR1108): Connect an external resistive voltage-divider from VOUT to this pin to set the
output voltage from 1.145V to 5V.
Output Voltage Precision: Multiple output voltage options are available and ranging from 1.2V ~ 5.0V at room
temperature with a guaranteed accuracy of ±1.5%, and ±3.0% when varying line, load and temperature.
FEATURES
* Ultra Low Dropout Voltage
* Low Ground Pin Current
* 0.65% Load Regulation
* The Guaranteed Output Current is 1A DC
* Output Voltage Accuracy ± 1.5%
*ERROR Flag Indicates Output Status
* Sense option improves better load regulation
* Low Output Capacitor Required
* Over temperature Protection And Over current
Protection
www.unisonic.com.tw
1 of 9
Copyright © 2018 Unisonic Technologies Co., Ltd
QW-R102-031.V
LR1108/E
CMOS IC
ORDERING INFORMATION
Ordering Number
Pin Assignment
Package
Packing
Lead Free
Halogen Free
A: GOI
B: OGI
C: GIO
D: IGO
LR1108L-xx-AA3--R
LR1108L-xx-AB3--R
LR1108L-xx-TN3--R
LR1108G-xx-AA3--R
SOT-223
SOT-89
TO-252
Tape Reel
LR1108G-xx-AB3--R
LR1108G-xx-TN3--R
1: GIO
3: GOI
5: OGI
6: IGO
LR1108L-xx-AE3--R
LR1108G-xx-AE3--R
SOT-23
Tape Reel
LR1108L-xx-AF5-R
LR1108EL-xx-AF5-R
LR1108G-xx-AF5-R
LR1108EG-xx-AF5-R
SOT-25
SOT-25
I
I
G
G
S
E
O
O
-
-
-
-
-
-
I
Tape Reel
Tape Reel
Tape Reel
SD
SD
LR1108L-xx-K08-3030-R LR1108G-xx-K08-3030-R DFN3030-8 O N ADJ G
N N
SD
Note: Pin Assignment: I:VIN O:VOUT G:GND SD: SD E: ERROR S:SET/ADJ
UNISONIC TECHNOLOGIES CO., LTD
2 of 9
QW-R102-031.V
www.unisonic.com.tw
LR1108/E
CMOS IC
MARKING INFORMATION
PACKAGE
VOLTAGE CODE
MARKING
SOT-223
SOT-89
SOT-23
L: Lead Free
G: Halogen Free
SPXX
Voltage Code
12: 1.2V
15: 1.5V
18: 1.8V
25: 2.5V
2J: 2.85V
33: 3.3V
50: 5.0V
SOT-25
(LR1108E)
SOT-25
(LR1108)
TO-252
DFN3030-8
UNISONIC TECHNOLOGIES CO., LTD
3 of 9
QW-R102-031.V
www.unisonic.com.tw
LR1108/E
CMOS IC
PIN DESCRIPTION
For SOT-223/SOT-89/TO-252 Package
PIN CODE & NO
PIN NAME
I/O
O
DESCRIPTION
DESCRIPTION
A
2
1
3
B
1
2
3
C
3
1
2
D
3
2
1
VOUT
GND
VIN
Output Voltage
Ground
Input Supply
For SOT-23 Package
PIN CODE & NO
PIN NAME
I/O
O
1
1
2
3
3
1
3
2
5
2
3
1
6
2
1
3
GND
VIN
Ground
Input Supply
Output Voltage
VOUT
For SOT-25 Package
PIN NO
PIN NAME
I/O
DESCRIPTION
1
2
VIN
Input supply
Ground
GND
3
I
Active low shutdown input.
SD
ERROR flag, active low; when the output dropout of regulation due to low
ERROR
(For LR1108E)
O
input voltage, the LR1108E produces a logic low signal at the ERROR
4
5
pin.
SET/ADJ
(For LR1108)
VOUT
Voltage-Setting Input. Connect an external resistive voltage-divider from
I
VOUT to this pin to set the output voltage. Connect to GND for Preset output
O
Output voltage
For DFN3030-8 Package
PIN NO
1
PIN NAME
VOUT
I/O
O
DESCRIPTION
Output voltage
2, 6, 7
NC
Voltage-Setting Input. Connect an external resistive voltage-divider from
OUT to this pin to set the output voltage.
3
ADJ
I
I
V
4
5
8
GND
SD
Ground
Active high Enable input.
Input supply
VIN
UNISONIC TECHNOLOGIES CO., LTD
4 of 9
QW-R102-031.V
www.unisonic.com.tw
LR1108/E
CMOS IC
BLOCK DIAGRAM
VIN
SD
VOUT
ERROR
GND
LR1108E
VIN
SD
VOUT
SET/ADJ
80mV
GND
LR1108
UNISONIC TECHNOLOGIES CO., LTD
5 of 9
QW-R102-031.V
www.unisonic.com.tw
LR1108/E
CMOS IC
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
VIN
RATINGS
2.5 ~ 7.0
UNIT
V
Input Voltage (Operating) (Note 10)
Shutdown Input Voltage
IOUT (Survival)
VIN(SHDN)
-0.3 ~ VIN+0.3
V
Short Circuit Protected
VIN+0.3
V
A
Maximum Voltage for ERROR Pin
Maximum Operating Current (DC)
Power Dissipation (Note 2)
Junction Temperature
1
PD
TJ
Internally Limited
+150
°C
°C
°C
Operating Temperature
TOPR
TSTG
-40 ~ +125
-65 ~ +150
Storage Temperature
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
THERMAL DATA
PARAMETER
SYMBOL
RATINGS
165
179
325
260
112
90
UNIT
°C/W
SOT-223
SOT-89
SOT-23
SOT-25
TO-252
Junction to Ambient
θJA
DFN3030-8
SOT-223
SOT-89
SOT-23
SOT-25
TO-252
15
47
130
110
12
Junction to Case
θJC
°C/W
DFN3030-8
16
ELECTRICAL CHARACTERISTICS
Limits in standard typeface are for TJ = 25°C, and limits in boldface type apply over the full operating temperature
range. (TJ = 25°C, VIN = VO(NOM) + 1V, IL = 10mA, COUT = 22μF, VSD = VIN-0.3V, unless otherwise specified.)
PARAMETER
Input Voltage Range
SYMBOL
VIN
TEST CONDITIONS
MIN
TYP
MAX
6.0
UNIT
V
0mA ≤ IL ≤ 1A
-1.5
-3
+1.5
+3
Output Voltage Tolerance (Note 4)
VOUT
0
%
VOUT +1 ≤ VIN≤ 6.0V
△VOUT
△VOUT/△IOUT
VD
Output Voltage Line Regulation (Note 4)
Output Voltage Load Regulation (Note 4)
Dropout Voltage (Note 6)
V
OUT+1V<VIN<6.0V
0.6
0.65
325
150
300
%
%
10mA < IL < 1A
IL = 1A
500
mV
Ground Pin Current In Normal Operation
Mode
IL = 0mA
IL = 1A
IGND
uA
A
Peak Output Current
IO(PEAK)
(Note 2)
1
SHORT CIRCUIT PROTECTION
Short Circuit Current
ISC
2
A
OVER TEMPERATURE PROTECTION
Shutdown Threshold
TSHDN(THR)
TSHDN(HYS)
165
10
°C
°C
Thermal Shutdown Hysteresis
UNISONIC TECHNOLOGIES CO., LTD
6 of 9
QW-R102-031.V
www.unisonic.com.tw
LR1108/E
CMOS IC
ELECTRICAL CHARACTERISTICS (Cont.)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
TYP
MAX
0.2
UNIT
V
SHUTDOWN INPUT
Output=High
Output=Low
IL=1A
VIN-0.3
VIN
0
Shutdown Threshold
VSHDN
Turn-off Delay
tD(OFF)
tD(ON)
ISD
20
25
1
μs
μs
nA
Turn-on Delay
IL=1A
SD Input Current
VSD=VIN
ERROR FLAG COMPARATOR (LR1108E)
VEF(SAT) ISINK=100μA
0.02
1
0.1
V
ERROR Flag Saturation
II(LEAK)
nA
ERROR Flag Pin Leakage Current
Threshold
VT
VTHR
tD
(Note 5)
(Note 5)
5
2
10
5
16
8
%
%
Threshold Hysteresis
Flag Reset Delay
1
μs
ADJ Voltages @ Set/ADJ Mode (connect to GND for Preset VOUT
)
@ Preset VO=1.2 ~ 1.5V
ADJ Voltage @ Preset VO=3.4 ~ 5.0V
@ Preset VO=1.8 ~ 3.3V
Measured on ADJ,
OUT=10mA
1.176
1.2
1.224
V
V
VADJ
I
1.122 1.145 1.168
AC PARAMETERS
VIN=VOUT+1.5V
OUT=100uF, VOUT=3.3V
VIN=VOUT+0.3V
OUT=100uF, VOUT=3.3V
60
40
C
Ripple Rejection
PSRR
dB
C
Output Noise Density
Output Noise Voltage
ρN(L/F)
f=120Hz
0.8
150
100
μV
BW=10Hz ~ 100kHz
BW=300Hz ~ 300kHz
eN
μVRMS
Notes: 1. Conditions for which the device is intended to be functional is indicated by operating ratings, but specific
performance limits isn’t be guaranteed. To make sure of specifications and test conditions, read Electrical
Characteristics. Only for the test conditions listed the guaranteed specifications can be applied. When the
device is not operated under the listed test conditions some performance characteristics may degrade.
2. Devices must be derated based on package thermal resistance at elevated temperatures.
3. The most likely parametric norm represents at 25°C.
4. Output voltage line regulation is the change in output voltage from the nominal value which is due to
change in the input line voltage. Which is defined as the change in output voltage from the nominal value
due to change in load current is output voltage load regulation. The load regulation and line regulation
specification include the typical number only. But, the limits for load and line regulation are included in the
output voltage tolerance specification.
5. ERROR Flag hysteresis and threshold are specified as regulated output voltage’s percentage.
6. At which the output drops 2% below the normal value dropout voltage is defined as the minimum input to
output differential voltage. Only to output voltages of 2.5V and above dropout voltage specification applies.
For output voltages below 2.5V, since the minimum input voltage is 2.5V, the drop-out voltage is nothing
but the input to output differential.
7. Specification has been tested at -40°C ≤ TJ ≤ +85°Ccause under shutdown conditions the temperature rise
of the device is negligible.
8. The minimum operating VIN value is equal to [VOUT(NOM) + VDROPOUT] or 2.5V, just the greater.
UNISONIC TECHNOLOGIES CO., LTD
7 of 9
QW-R102-031.V
www.unisonic.com.tw
LR1108/E
CMOS IC
TYPICAL APPLICATION CIRCUIT
INPUT
3.3V±10%
VIN
SD
VOUT
2.5V, 500mA
VOUT
UTC LR1108
CIN
1µF
COUT
22µF
*
(Note)
ERROR
SD
ERROR
GND
Note: SD and ERROR pins must be pulled high through a 10kΩ pull-up resistor. Connect the ERROR pin to
ground if this function is not used.
Notes: 1. SD pins must be pulled high through a 10kΩ pull-up resistor.
2. Connect the SET/ADJ pin to ground if this function is not used.
3. The output voltage is calculated by:
R1
VOUT = VREF(1+
)
R2
UNISONIC TECHNOLOGIES CO., LTD
8 of 9
QW-R102-031.V
www.unisonic.com.tw
LR1108/E
CMOS IC
TYPICAL CHARACTERISTICS
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all UTC products described or contained herein.
UTC products are not designed for use in life support appliances, devices or systems where malfunction
of these products can be reasonably expected to result in personal injury. Reproduction in whole or in
part is prohibited without the prior written consent of the copyright owner. UTC reserves the right to
make changes to information published in this document, including without limitation specifications and
product descriptions, at any time and without notice. This document supersedes and replaces all
information supplied prior to the publication hereof.
UNISONIC TECHNOLOGIES CO., LTD
9 of 9
QW-R102-031.V
www.unisonic.com.tw
相关型号:
LR1108G-25-AB3-C-R
Fixed Positive LDO Regulator, 2.5V, 0.5V Dropout, CMOS, PSSO3, HALOGEN FREE, SOT-89, 3 PIN
UTC
LR1108G-25-AF5-R
Fixed Positive LDO Regulator, 2.5V, 0.5V Dropout, CMOS, PDSO5, HALOGEN FREE, SOT-25, 5 PIN
UTC
LR1108G-33-AB3-C-R
Fixed Positive LDO Regulator, 3.3V, 0.5V Dropout, CMOS, PSSO3, HALOGEN FREE, SOT-89, 3 PIN
UTC
LR1108G-33-TN3-D-R
Fixed Positive LDO Regulator, 3.3V, 0.5V Dropout, CMOS, PSSO2, TO-252, 3/2 PIN
UTC
©2020 ICPDF网 联系我们和版权申明