LR2967L-AD-SH2-R [UTC]

2A, LOW DROPOUT REGULATOR;
LR2967L-AD-SH2-R
型号: LR2967L-AD-SH2-R
厂家: Unisonic Technologies    Unisonic Technologies
描述:

2A, LOW DROPOUT REGULATOR

文件: 总4页 (文件大小:173K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
UNISONIC TECHNOLOGIES CO., LTD  
LR2967  
Preliminary  
CMOS IC  
2A, LOW DROPOUT  
REGULATOR  
DESCRIPTION  
The UTC LR2967-XX is CMOS-based positive voltage and a  
very low dropout regulator IC that minimum input voltage is 2.5V  
and is capable of delivering the continuous output load current up  
to 2.0A.  
HSOP-8  
It has features of low dropout (typically 400mV at 2A), a very  
low quiescent current (typically 300uA at 0.1A).  
The output voltage can be set from 0.5V to (VIN - VDRP) with an  
external resistor divider and it has ±2% accuracy through all  
temperature ranges include the line as well as load variations. It is  
allowed to use a small 4.7μF MLCC input and output capacitor to  
deliver the current with the stable operation.  
Built-in Soft-Start function reduces the inrush current and the  
other features are include over current protection (OCP),  
short-circuit protection (SCP), and thermal shut down protection  
(TSD).  
FEATURES  
* Input Voltage Range: 2.5V~6.0V  
* Supply Current .: Typ. 300uA  
* Current limit : Min. 3A  
* Adjustable Output from 0.5V  
* LR2967-XX: Typ 0.4V Dropout @ IOUT=2.0A  
* Compatible with MLCC Capacitors  
* Built-in Soft-Start Limits Inrush Current  
* Built-in Thermal Shutdown Protection  
* Built-in Over Current & Short Circuit Protection  
ORDERING INFORMATION  
Ordering Number  
Lead Free  
Package  
HSOP-8  
Packing  
Tape Reel  
Halogen Free  
LR2967G-xx-SH2-R  
LR2967L-xx-SH2-R  
Note: xx: Output Voltage, refer to Marking Information.  
www.unisonic.com.tw  
1 of 4  
Copyright © 2018 Unisonic Technologies Co., Ltd  
QW-R102-102.a  
LR2967  
Preliminary  
CMOS IC  
MARKING INFORMATION  
PACKAGE  
VOLTAGE CODE  
MARKING  
HSOP-8  
AD: ADJ  
PIN CONFIGURATION  
VIN  
OUT 1  
OUT 2  
FB  
1
2
3
4
8
7
6
5
VIN  
EN  
NC  
GND  
PIN DESCRIPTION  
PIN NO.  
PIN NAME  
OUT  
DESCRIPTION  
1, 2  
Voltage Regulator Output Pin  
Feedback Pin. Connect to output through a voltage-divider to set the output.  
Recommended that the tolerance of feedback resistors is below 1%.  
3
FB  
4
5
GND  
NC  
Ground Pin  
NC  
6
EN  
Chip Enable Pin  
Input Supply Voltage Pin.  
7, 8  
VIN  
BLOCK DIAGRAM  
VIN  
Reference  
(0.5V)  
EN  
Error  
AMP  
OUT  
FB  
OCP/TSD  
GND  
UNISONIC TECHNOLOGIES CO., LTD  
2 of 4  
QW-R102-102.a  
www.unisonic.com.tw  
LR2967  
Preliminary  
CMOS IC  
ABSOLUTE MAXIMUM RATING (TA=25°C unless otherwise specified)  
PARAMETER  
SYMBOL  
VIN  
RATINGS  
-0.3 ~ 7  
UNIT  
V
Input Voltage  
Output Voltage  
OUT  
TJ  
-0.3 ~ VIN+0.3  
+150  
V
Junction Temperature  
Storage Temperature  
°C  
°C  
TSTG  
-65~150  
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.  
Absolute maximum ratings are stress ratings only and functional device operation is not implied.  
RECOMMENDED OPERATING CONDITIONS  
PARAMETER  
SYMBOL  
VIN  
RATINGS  
2.5 ~ 6.0  
-40 ~ +85  
UNIT  
V
Input Voltage Range  
Ambient Temperature Range  
TA  
°C  
THERMAL DATA  
PARAMETER  
SYMBOL  
RATINGS  
143  
UNIT  
Junction to Ambient  
θJA  
°С/W  
ELECTRICAL CHARACTERISTICS  
All parameters are guaranteed over the operational supply voltage and temperature range. Operating conditions  
unless otherwise noted are: VIN=5V, OUT=2.5V and TA=25°C. Typical values are for information only.  
PARAMETER  
Supply Voltage  
SYMBOL  
TEST CONDITIONS  
MIN  
490  
TYP MAX UNIT  
Quiescent Current  
Shutdown Current  
Feedback (FB)  
IQ  
IOUT=100mA  
300  
0.2  
uA  
uA  
ISTD  
VIN=6V, VEN=GND  
2
Feedback Voltage Accuracy  
Input Bias Current  
Output (OUT)  
VF  
IF  
IOUT=10mA, TA =25°C  
VFB=0.5V, VIN =6V  
500  
510  
0.1  
mV  
uA  
0.001  
Output Accuracy  
Load Regulation  
Line Regulation  
VOUT  
RLO  
RLN  
-2  
2
2
%
IOUT=1mA to 1.5A  
0.1  
%/A  
%/V  
VIN=2.2~6V, VOUT=1.225V, IOUT=1mA  
IOUT=2.0A,VFB=480mV  
-0.2  
0.2  
400  
140  
Dropout Voltage  
VDRP  
mV  
IOUT=1.5A,VFB=480mV  
280  
Current Limit  
IC  
3.0  
A
%
%
Load transient (Note 1)  
Line Transient (Note 1)  
Enable (EN))  
LOT  
RNT  
IOUT=20mA to 2A,  
3
3
VIN=0.5V  
VENH  
VENL  
IEN  
EN rising, VIN=OUT+1V~6V  
EN falling, VIN=OUT+1V~6V  
EN=0 or 6V  
1.2  
-1  
6
0.4  
1
V
V
Input Threshold  
Input Bias Current  
0
uA  
Thermal Shutdown (TSD) (Note 1)  
TSDON TSD On  
TSDOFF TSD Off  
165  
145  
°C  
°C  
TSD Threshold  
Note: Guaranteed by design but not production tested.  
UNISONIC TECHNOLOGIES CO., LTD  
3 of 4  
QW-R102-102.a  
www.unisonic.com.tw  
LR2967  
Preliminary  
CMOS IC  
TYPICAL APPLICATION CIRCUIT  
2.5V  
EN  
VIN  
OUT  
4.7µF  
5V  
40k  
FB  
4.7µF  
10kΩ  
GND  
UTC assumes no responsibility for equipment failures that result from using products at values that  
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other  
parameters) listed in products specifications of any and all UTC products described or contained herein.  
UTC products are not designed for use in life support appliances, devices or systems where malfunction  
of these products can be reasonably expected to result in personal injury. Reproduction in whole or in  
part is prohibited without the prior written consent of the copyright owner. UTC reserves the right to  
make changes to information published in this document, including without limitation specifications and  
product descriptions, at any time and without notice. This document supersedes and replaces all  
information supplied prior to the publication hereof.  
UNISONIC TECHNOLOGIES CO., LTD  
4 of 4  
QW-R102-102.a  
www.unisonic.com.tw  

相关型号:

LR29DL1020LH

custom milliohm resistor
KOA

LR29DL1020LJ

custom milliohm resistor
KOA

LR29DT1020LH

custom milliohm resistor
KOA

LR29DT1020LJ

custom milliohm resistor
KOA

LR2D3522

TeSys LRD thermal overload relays - 17...25 A - class 20
SCHNEIDER

LR2D3555

TeSys LRD thermal overload relays - 30...40 A - class 20
SCHNEIDER

LR2D3559

TeSys LRD thermal overload relays - 48...65 A - class 20
SCHNEIDER

LR2K0303

TeSys K - differential thermal overload relays - 0.23...0.36 A - class 10A
SCHNEIDER

LR2K0305

TeSys K - differential thermal overload relays - 0.54...0.8 A - class 10A
SCHNEIDER

LR2K0306

TeSys K - differential thermal overload relays - 0.8...1.2 A - class 10A
SCHNEIDER

LR2K0316

TeSys K - differential thermal overload relays - 8...11.5 A - class 10A
SCHNEIDER

LR3000AHC-25

32-Bit Microprocessor
ETC