M293010 [UTC]
1A, LOW-DROPOUT, 1.0~16V REGULATOR;型号: | M293010 |
厂家: | Unisonic Technologies |
描述: | 1A, LOW-DROPOUT, 1.0~16V REGULATOR |
文件: | 总4页 (文件大小:148K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UNISONIC TECHNOLOGIES CO., LTD
M293010
Preliminary
LINEAR INTEGRATED CIRCUIT
1A, LOW-DROPOUT, 1.0~16V
REGULATOR
DESCRIPTION
The UTC M293010 is 1A low dropout liner voltage regulators
that provide low voltage and high-current output. Designed
especially for the high-current requirements in industrial and
consumer applications; embedded core, memory, or logic supplies;
TVs, VCRs, and office equipment.
The UTC M293010 is an efficient voltage regulator with very low
dropout voltage and very low ground current. This device delivers a
regulated output at up to 1A. Included overcurrent and thermal
protection improve overall system reliability. Devices with fixed
output voltages are also available.
A inside bandgap reference provides accuracy and excellent
temperature characteristics for regulator. IQ does not increase
significantly as the dropout voltage is approached, an ideal feature
in standby/resume power systems where data integrity is crucial.
A inside power pnp provides a dropout voltage of less than 600mV
at 1A of current. An LS-TTL/CMOS-compatible input gives the
designer complete control over power up, standby, or power down.
Low output voltages eliminate the need for expensive PWM buck
converters. The low dropout voltage permits more efficient
regulation before output regulation is lost.
The UTC M293010 provided
a
5-lead TO-252 style
surface-mount plastic package with ground tab to provide a
low-resistance path for maximum heat dissipation.
FEATURES
* 1A output current
* Remote voltage sensing
* Thermal protection
* Over voltage protection
* Dropout voltage 0.6V at IOUT=1A
* 1µA maximum standby current
* Fast response
* Ground tab for superior heat dissipation
* Accurate current limiting
ORDERING INFORMATION
Ordering Number
Lead Free
Package
Packing
Halogen Free
M293010L-xx-TN5-T
M293010L-xx-TN5-R
M293010G-xx-TN5-T
M293010G-xx-TN5-R
TO-252-5
TO-252-5
Tape Reel
Tape Reel
Note: xx: Output Voltage, refer to Marking Information.
M293010L-xx-TN5-T
(1)Packing Type
(1) T: Tube, R: Tape Reel
(2)Package Type
(3)Output Voltage Code
(4)Lead Free
(2) TN5: TO-252-5
(3) xx: Refer to Marking Information
(4) L: Lead Free, G: Halogen Free
www.unisonic.com.tw
1 of 4
Copyright © 2013 Unisonic Technologies Co., Ltd
QW-R102-053.a
M293010
Preliminary
LINEAR INTEGRATED CIRCUIT
MARKING INFORMATION
PACKAGE
VOLTAGE CODE
MARKING
TO-252-5
AD: ADJ
PIN CONFIGURATION
1
2
VE
VIN
3
4
5
GND
VOUT
ADJ
PIN DESCRIPTION
PIN NO.
PIN NAME
VE
DESCRIPTION
1
2
3
4
5
Enable
Input
VIN
GND
VOUT
ADJ
Ground
Output
Adjustable
BLOCK DIAGRAM
UNISONIC TECHNOLOGIES CO., LTD
2 of 4
QW-R102-053.a
www.unisonic.com.tw
M293010
Preliminary
LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATING
PARAMETER
SYMBOL
VIN
RATINGS
UNIT
V
Input Voltage
35
1
Output Current (Note 2)
Enable Input Voltage
Junction Temperature
Storage Temperature
IOUT
A
VE
35
V
TJ
+125
-30~+125
°C
°C
TSTG
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. Output current rating is limited by input voltage, duty cycle, and ambient temperature. Under any set of
conditions, do not exceed a junction temperature of +125°C.
RECOMMENDED OPERATING CONDITIONS
PARAMETER
SYMBOL
VIN
RATINGS
2.4~27
UNIT
V
Input Voltage
Output Current
IOUT
0~1
A
Adjustable Voltage Range
1.2~16
V
Operating Ambient Temperature
Operating Junction Temperature
TA
TJ
-30~+100
-20~+100
°C
°C
ELECTRICAL CHARACTERISTICS
(TA=+25°C, VIN=7V, VOUT=5V adjusted, VE=2V, unless otherwise noted)
PARAMETER
Output Voltage
SYMBOL
VOUT
TEST CONDITIONS
VIN=VO(nom)+1V, IOUT=10mA
MIN
TYP
MAX UNIT
V
VOUT(nom)
VOUT(off) VE=0V
0.5
V
Temperature Coefficient of Output
Voltage
aVOUT
0°C≤TJ≤100°C
±0.5
1.00
mV/°C
Reference Voltage
Short Circuit Current
Overvoltage Protection
Line Regulation
VREF
IOM
IOUT=10mA
Note 1
0.98
1.1
33
1.02
V
A
VIM
IOUT=10mA
V
∆VOUT(∆VI) VIN=6.0V~15V, IOUT=10mA
∆VOUT(∆IO) IOUT=0A~1.0A
30
75
mV
mV
V
Load Regulation
IOUT=0.5A
VINMIN-VOUT
0.3
0.6
Dropout Voltage
IOUT=1.0A
V
IOUT=0mA, VE=2.0V
1.2
0.1
mA
mA
V
Ground Current
IGND
VE=0V
VEH
VEL
IEH
Output ON
2.0
Control Input Voltage
Control Input Current
Output OFF
VE=2.0V
0.8
40
V
µA
µA
dB
°C
IEL
VE=0V
0
-5.0
Ripple Rejection Ratio
Over Temperature
PSRR
TJ
100Hz≤f≤120Hz, IOUT=100mA
IOUT=10mA
75
150
Note: 1. Output short-circuit current is at point where output voltage has decreased 5% below VOUT(nom)
.
UNISONIC TECHNOLOGIES CO., LTD
3 of 4
QW-R102-053.a
www.unisonic.com.tw
M293010
Preliminary
LINEAR INTEGRATED CIRCUIT
TYPICAL APPLICATION CIRCUIT
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
4 of 4
QW-R102-053.a
www.unisonic.com.tw
相关型号:
©2020 ICPDF网 联系我们和版权申明