R33LD20-TB5-T [UTC]

Fixed Positive LDO Regulator, 3.3V, 0.5V Dropout, BIPolar, TO-220B, 5 PIN;
R33LD20-TB5-T
型号: R33LD20-TB5-T
厂家: Unisonic Technologies    Unisonic Technologies
描述:

Fixed Positive LDO Regulator, 3.3V, 0.5V Dropout, BIPolar, TO-220B, 5 PIN

局域网 输出元件 调节器
文件: 总10页 (文件大小:112K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
UNISONIC TECHNOLOGIES CO., LTD  
RXXLD20  
LINEAR INTEGRATED CIRCUIT  
2A OUTPUT TYPE LOW  
POWER-LOSS VOLTAGE  
REGULATOR  
1
FEATURES  
TO-220F-4  
* Low power-loss(Dropout voltage: 0.5V(max) at IOUT=2.0A)  
* 2.0A output type  
* Output voltage precision:±3.0%  
* Built-in ON/OFF control function and over-current protection  
circuit.  
1
* Thermal shutdown protection.  
TO-220B  
*Pb-free plating product number:RXXLD20L  
ORDERING INFORMATION  
Order Number  
Package  
Packing  
Normal  
Lead Free Plating  
RXXLD20-TB5-T  
RXXLD20-TF4-T  
RXXLD20L-TB5-T  
RXXLD20L-TF4-T  
TO-220B  
Tube  
Tube  
TO-220F-4  
RXXLD20L-TB5-T  
(1)Packing Type  
(2)Package Type  
(3)Lead Plating  
(4)Voltage Code  
(1) T: Tube  
(2) TB5: TO-220B, TF4: TO-220F-4  
(3) L: Lead Free Plating, Blank: Pb/Sn  
(4) xx: refer to Marking Information  
PIN DESCRIPTION  
PIN NO.  
PIN NAME  
NC  
TO-220F-4 TO-220B  
1
1
2
3
4
2
3
4
5
INPUT  
OUTPUT  
GND  
ON/OFF  
www.unisonic.com.tw  
Copyright © 2005 Unisonic Technologies Co., Ltd  
1 of 10  
QW-R102-015.D  
RXXLD20  
LINEAR INTEGRATED CIRCUIT  
MARKING INFORMATION  
PACKAGE  
VOLTAGE CODE  
MARKING  
UTC  
33 :3.3V  
35 :3.5V  
05 :5.0V  
06 :6.0V  
09 :9.0V  
12 :12 V  
TO-220F-4  
TO-220B  
RXXLD20L  
Space :Pb/Sn  
L:Pb-free  
DATE CODE  
VOLTAGE CODE  
UNISONIC TECHNOLOGIES CO., LTD  
2 of 10  
QW-R102-015.D  
www.unisonic.com.tw  
RXXLD20  
LINEAR INTEGRATED CIRCUIT  
BLOCK DIAGRAM  
TO-220F-4  
TO-220B  
2
3
1
2
4
Specfic IC  
Specfic IC  
5
4
3
UNISONIC TECHNOLOGIES CO., LTD  
3 of 10  
QW-R102-015.D  
www.unisonic.com.tw  
RXXLD20  
LINEAR INTEGRATED CIRCUIT  
ABSOLUTE MAXIMUM RATINGS (Ta=25  
)  
PARAMETER  
SYMBOL  
VIN  
RATINGS  
UNIT  
V
Input Voltage(Note1)  
20  
20  
ON/OFF Control Terminal Voltage(Note1)  
Output Current  
Vc  
V
IOUT  
2.0  
A
No Heat Sink  
1.4  
W
W
Power Dissipation  
PD  
With Heat Sink  
15  
Junction Temperature(Note2)  
Operating Temperature  
Storage Temperature  
TJ  
150  
°
°
°
C
C
C
TOPR  
TSTG  
-20 ~ +80  
-40 ~ +150  
Note1 : All are open except GND and applicable terminals.  
Note2 : Overheat protection may operate at 125 TJ 150  
ELECTRICAL CHARACTERISTICS (Refer to the test circuits, unless otherwise specified, Ta=25  
For R33LD20(3.3V)  
PARAMETER  
°C  
°
C)  
SYMBOL  
TEST CONDITIONS  
MIN  
TYP MAX UNIT  
Output Voltage  
VOUT VIN=5V, IOUT=1A  
3.201  
3.3 3.399  
V
%
%
Line Regulation  
VOUT VIN=4 ~ 10V, IOUT=5mA  
0.1  
0.1  
2.5  
2.0  
Load Regulation  
VOUT VIN=5V, IOUT=5mA ~ 2.0A  
Temperature Coefficient of Output Voltage  
Ripple Rejection  
TcVo TJ=0 ~ 125  
°
C,IOUT=5mA  
Refer to Fig.2  
(Note1), IOUT=2A  
±0.02  
55  
%/°C  
dB  
V
RR  
VD  
45  
Dropout Voltage  
0.5  
ON  
Voltage for Control(Note2)  
OFF  
VC(ON) VIN=5V  
2.0  
V
VC(OFF) VIN=5V  
0.8  
20  
V
ON  
IC(ON) VC=2.7V,VIN=5V  
IC(OFF) VC=0.4V, VIN=5V  
µA  
mA  
mA  
Current for Control  
OFF  
-0.4  
10  
Quiescent Current  
IQ  
IOUT=0A, VIN=5V  
For R35LD20(3.5V)  
PARAMETER  
SYMBOL  
TEST CONDITIONS  
MIN  
TYP MAX UNIT  
Output Voltage  
VOUT VIN=5.5V, IOUT=1A  
3.395  
3.5 3.605  
V
%
%
Line Regulation  
VOUT VIN=4.5 ~ 10.5V, IOUT=5mA  
0.1  
0.1  
2.5  
2.0  
Load Regulation  
VOUT VIN=5.5V, IOUT=5mA ~ 2.0A  
Temperature Coefficient of Output Voltage  
Ripple Rejection  
TcVo TJ=0 ~ 125  
°
C,IOUT=5mA  
Refer to Fig.2  
(Note1), IOUT=2A  
±0.02  
55  
%/°C  
dB  
V
RR  
VD  
45  
Dropout Voltage  
0.5  
ON  
Voltage for Control(Note2)  
OFF  
VC(ON) VIN=5V  
2.0  
V
VC(OFF) VIN=5V  
0.8  
20  
V
ON  
IC(ON) VC=2.7V,VIN=5.5V  
IC(OFF) VC=0.4V, VIN=5.5V  
µA  
mA  
mA  
Current for Control  
OFF  
-0.4  
10  
Quiescent Current  
IQ  
IOUT=0A, VIN=5.5V  
For R05LD20(5V)  
PARAMETER  
SYMBOL  
TEST CONDITIONS  
MIN  
4.85  
TYP MAX UNIT  
Output Voltage  
VOUT VIN =7V, IOUT=1A  
5.0  
0.5  
5.15  
2.5  
V
%
%
Line Regulation  
VOUT VIN =6 ~ 12V, IOUT=5mA  
VOUT VIN =7V, IOUT=5mA ~ 2.0A  
Load Regulation  
0.1  
2.0  
Temperature Coefficient of Output Voltage  
Ripple Rejection  
TcVo TJ=0 ~ 125  
°
C, IOUT=5mA  
Refer to Fig.2  
(Note1), IOUT=2A  
±0.02  
55  
%/°C  
dB  
V
RR  
VD  
45  
Dropout Voltage  
0.5  
ON  
Voltage for Control(Note2)  
OFF  
VC(ON) VIN =7V  
2.0  
V
VC(OFF) VIN =7V  
0.8  
20  
V
ON  
IC(ON) VC=2.7V, VIN =7V  
IC(OFF) VC=0.4V, VIN =7V  
µA  
mA  
mA  
Current for Control  
OFF  
-0.4  
10  
Quiescent Current  
IQ  
IOUT =0A, VIN =7V  
UNISONIC TECHNOLOGIES CO., LTD  
4 of 10  
QW-R102-015.D  
www.unisonic.com.tw  
RXXLD20  
LINEAR INTEGRATED CIRCUIT  
ELECTRICAL CHARACTERISTICS(Cont.)  
For R06LD20(6V)  
PARAMETER  
SYMBOL  
TEST CONDITIONS  
MIN  
5.82  
TYP MAX UNIT  
Output Voltage  
VOUT VIN =8V, IOUT=1A  
6.0  
0.5  
6.18  
2.5  
V
%
%
Line Regulation  
VOUT VIN =7 ~ 13V, IOUT=5mA  
VOUT VIN =8V, IOUT=5mA ~ 2.0A  
Load Regulation  
0.1  
2.0  
Temperature Coefficient of Output Voltage  
Ripple Rejection  
TcVo TJ=0 ~ 125  
°
C, IOUT=5mA  
Refer to Fig.2  
(Note1), IOUT=2A  
±0.02  
55  
%/°C  
dB  
V
RR  
VD  
45  
Dropout Voltage  
0.5  
ON  
Voltage for Control(Note2)  
OFF  
VC(ON) VIN =8V  
2.0  
V
VC(OFF) VIN =8V  
0.8  
20  
V
ON  
IC(ON) VC=2.7V, VIN =8V  
IC(OFF) VC=0.4V, VIN =8V  
µA  
mA  
mA  
Current for Control  
OFF  
-0.4  
10  
Quiescent Current  
IQ  
IOUT =0A, VIN =8V  
For R09LD20(9V)  
PARAMETER  
SYMBOL  
TEST CONDITIONS  
MIN  
8.73  
TYP MAX UNIT  
Output Voltage  
VOUT VIN =11V, IOUT=1A  
9.0  
0.5  
9.27  
2.5  
V
%
%
Line Regulation  
VOUT VIN =10 ~ 16V, IOUT=5mA  
VOUT VIN =11V, IOUT=5mA ~ 2.0A  
Load Regulation  
0.1  
2.0  
Temperature Coefficient of Output Voltage  
Ripple Rejection  
TcVo TJ=0 ~ 125  
°
C, IOUT=5mA  
Refer to Fig.2  
(Note1), IOUT=2A  
±0.02  
55  
%/°C  
dB  
V
RR  
VD  
45  
Dropout Voltage  
0.5  
ON  
Voltage for Control(Note2)  
OFF  
VC(ON) VIN =11V  
2.0  
V
VC(OFF) VIN =11V  
0.8  
20  
V
ON  
IC(ON) VC=2.7V, VIN =11V  
IC(OFF) VC=0.4V, VIN =11V  
µA  
mA  
mA  
Current for Control  
OFF  
-0.4  
10  
Quiescent Current  
IQ  
IOUT =0A, VIN =11V  
For R12LD20(12V)  
PARAMETER  
SYMBOL  
TEST CONDITIONS  
MIN  
TYP MAX UNIT  
Output Voltage  
VOUT VIN =14V, IOUT=1A  
11.64 12.0 12.36  
V
%
%
Line Regulation  
VOUT VIN =13 ~ 19V, IOUT=5mA  
VOUT VIN =14V, IOUT=5mA ~ 2.0A  
0.5  
0.1  
2.5  
2.0  
Load Regulation  
Temperature Coefficient of Output Voltage  
Ripple Rejection  
TcVo TJ=0 ~ 125  
°
C, IOUT=5mA  
Refer to Fig.2  
(Note1), IOUT=2A  
±0.02  
55  
%/°C  
dB  
V
RR  
VD  
45  
Dropout Voltage  
0.5  
ON  
Voltage for Control(Note2)  
OFF  
VC(ON) VIN =14V  
2.0  
V
VC(OFF) VIN =14V  
0.8  
20  
V
ON  
IC(ON) VC=2.7V, VIN =14V  
IC(OFF) VC=0.4V, VIN =14V  
µA  
mA  
mA  
Current for Control  
OFF  
-0.4  
10  
Quiescent Current  
IQ  
IOUT =0A, VIN =14V  
Note: 1.Input voltage shall be the value when output voltage is 95% in comparison with the initial value.  
2.In case of opening control terminal(pin 5 of TO-220B, pin 4 of TO-220F-4), output voltage turns on.  
UNISONIC TECHNOLOGIES CO., LTD  
5 of 10  
QW-R102-015.D  
www.unisonic.com.tw  
RXXLD20  
LINEAR INTEGRATED CIRCUIT  
TEST CIRCUITS  
Note :  
: TO-220F-4, ( ): TO-220B  
IN  
V
Vo  
1
2
4
(2)  
(3)  
(5)  
Vc  
Io  
A
(4)  
3
+
V
A
47μF  
R
L
0.33μF  
I
D
A
Ic  
Fig.1  
+
1
2
4
(2)  
(3)  
(5)  
Io  
+
ei  
(4)  
3
47μF  
V eo  
0.33μF  
R
L
V
IN  
V
IN=5V(R33LD20)  
5.5V(R35LD20)  
7V(R05LD20)  
8V(R06LD20)  
11V(R09LD20)  
14V(R12LD20)  
f=120Hz  
ei=0.5Vrms  
Io=0.5A  
RR=20log (ei/eo)  
Fig.2 For Ripple Rejection  
TYPICAL APPLICATION  
VO  
1 (2)  
2
(3)  
+
Co  
VIN  
Cin  
(4)  
3
(5) 4  
ON/OFF signal  
High or Open:Output ON  
Low :Output OFF  
( ) : TO-220B  
: TO-220F-4  
UNISONIC TECHNOLOGIES CO., LTD  
6 of 10  
QW-R102-015.D  
www.unisonic.com.tw  
RXXLD20  
LINEAR INTEGRATED CIRCUIT  
TYPICAL CHARACTERISTICS  
Fig.3 Power Dissipation vs. Ambient  
Temperature  
Fig.4 Overcurrent Protection  
Characteristics(Typical Value) (R33LD20)  
20  
15  
12  
PD1:No heat sink  
PD2:With infinite heat sink  
11  
10  
9
PD2  
8
7
10  
6
5
Vd=1V  
4
5
3
Vd=0.5V  
Vd=3V  
2
1
0
PD1  
Vd =2V  
0
-20  
0
20  
40  
60  
80  
0
1.0  
2.0  
3.0  
4.0  
rature, Ta ()  
Ambient tempe  
Note: Oblique line portion:Overheat protection may operate in this area .  
Fig.6 Overcurrent Protection Characteristics  
(Typical Value)(R09LD20)  
Fig.5 Overcurrent Protection Characteristics  
(Typical Value)(R05LD20)  
12  
12  
11  
11  
10  
9
10  
Vd=2V  
9
8
7
8
7
Vd=3V  
6
6
5
Vd=2V  
5
Vd=3V  
4
Vd=1V  
4
3
3
Vd=1V  
2
2
1
Vd=0.5V  
1
Vd=0.5V  
0
1.0  
2.0  
3.0  
4.0  
0
1.0  
2.0  
3.0  
4.0  
t current, Io (A)  
Outpu  
o (A)  
Output current, I  
Fig.7 Overcurrent Protection Characteristics  
(Typical Value)(R12LD20)  
Fig.8 Output Voltage Deviation vs .Junction  
Temperature (R03LD20)  
12  
150  
V
IN=5V  
11  
Vd=2V  
Io=0.5A  
10  
100  
Vd=3V  
9
8
7
50  
0
Vd=1V  
6
5
4
3
Vd=0.5V  
-50  
2
1
-100  
-25  
0
1.0  
2.0  
3.0  
4.0  
0
25  
50  
75  
100  
125  
rrent Io (A)  
Output cu  
erature, T  
Junction temp  
J
()  
UNISONIC TECHNOLOGIES CO., LTD  
7 of 10  
QW-R102-015.D  
www.unisonic.com.tw  
RXXLD20  
LINEAR INTEGRATED CIRCUIT  
TYPICAL CHARACTERISTICS(Cont.)  
Fig.9 Output Voltage Deviation vs .Junction  
Temperature (R05LD20)  
Fig.10 Output Voltage Deviation vs .Junction  
Temperature (R09LD20)  
150  
250  
V
IN=11V  
V
IN=7V  
Io=0.5A  
150  
Io=0.5A  
100  
100  
50  
0
50  
0
-50  
-50  
-100  
-150  
-100  
-25  
0
25  
50  
75  
100  
125  
-25  
0
25  
50  
75  
100  
125  
T
J
()  
ure, T  
nction temperat  
J
()  
on temperature,  
Juncti  
Ju  
Fig.11 Output Voltage Deviation vs .Junction  
Fig.12 Output Voltage vs .Input  
Voltage (R33LD20)  
Temperature (R12LD20)  
250  
8
7
V
IN=18V  
200  
Io=0.5A  
150  
100  
50  
6
0
4
0
RL=∞Ω  
3
2
-50  
RL=3.3Ω  
-100  
RL  
=1.65Ω  
1
-150  
-200  
0
-25  
0
25  
50  
75  
100  
125  
10  
0
2
4
6
8
oltage, VIN (V)  
Input v  
T
J
()  
on temperature,  
Juncti  
Fig.13 Output Voltage vs .Input  
Voltage (R05LD20)  
Fig.14 Output Voltage vs .Input  
Voltage (R09LD20)  
10  
8
RL=∞Ω  
7
6
5
RL=9Ω  
R
L
=4.5Ω  
5
=2.5Ω  
4
3
R
L
RL=∞Ω  
R
L=2.5Ω  
2
1
0
0
5
10  
15  
0
0
2
4
6
8
10  
, VIN (V)  
IN (V)  
nput voltage, V  
I
Input voltage  
UNISONIC TECHNOLOGIES CO., LTD  
8 of 10  
QW-R102-015.D  
www.unisonic.com.tw  
RXXLD20  
LINEAR INTEGRATED CIRCUIT  
TYPICAL CHARACTERISTICS(Cont.)  
Fig.15 Output Voltage vs .Input  
Voltage (R12LD30)  
Fig.16 Circuit Operating Current vs .Input  
Voltage (R33LD30)  
20  
15  
80  
60  
40  
RL=∞Ω  
10  
RL=12Ω  
R
L=6Ω  
RL=3.3Ω  
RL=1.65Ω  
5
20  
0
RL  
=∞Ω  
0
0
0
5
10  
5
10  
15  
20  
25  
IN (V)  
Input voltage, V  
N (V)  
Input voltage, VI  
Fig.17 Circuit Operating Current vs .Input  
Voltage (R05LD30)  
Fig.18 Circuit Operating Current vs .Input  
Voltage (R09LD30)  
80  
80  
60  
60  
40  
40  
RL=2.5Ω  
RL=4.5Ω  
20  
0
20  
0
RL=5Ω  
RL  
=9Ω  
RL=∞Ω  
R
L=∞Ω  
15  
0
5
10  
5
10  
0
IN (V)  
put voltage, V  
In  
IN (V)  
Input voltage, V  
Fig.20 Dropout Voltage vs .Junction  
Temperature  
Fig.19 Circuit Operating Current vs .Input  
Voltage (R12LD30)  
80  
0.5  
0.4  
R12LD20  
R33LD20  
60  
R09LD20  
R05LD20  
0.3  
0.2  
40  
RL=6Ω  
20  
0
0.1  
0
RL  
=12Ω  
R
L=∞Ω  
-25  
0
25  
50  
75  
100  
125  
0
5
10  
15  
20  
25  
ure, T  
nction temperat  
J
(℃)  
Ju  
ltage, VIN (V)  
Input vo  
UNISONIC TECHNOLOGIES CO., LTD  
9 of 10  
QW-R102-015.D  
www.unisonic.com.tw  
RXXLD20  
LINEAR INTEGRATED CIRCUIT  
TYPICAL CHARACTERISTICS(Cont.)  
Fig.22 Ripple Rejection vs.Input Ripple  
Frequency  
Fig.21 Quiescent Current vs .Junction  
Temperature  
10  
80  
Io=oA  
R33LD20(VIN=5V)  
70  
R12LD20  
8
(VIN=14V)  
60  
R09LD20(VIN=11V)  
50  
6
R05LD20(VIN=7V)  
40  
R12LD20  
R05LD20  
R09LD20  
R33LD20  
4
30  
20  
10  
2
I0=c=0.5A,ei=0.5Vrms  
0
0
-25  
0
25  
50  
75  
100  
125  
0.1  
100  
1
10  
T
J
(℃)  
ion temperature,  
z)  
Junct  
frequency, f (kH  
Input ripple  
UTC assumes no responsibility for equipment failures that result from using products at values that  
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or  
other parameters) listed in products specifications of any and all UTC products described or contained  
herein. UTC products are not designed for use in life support appliances, devices or systems where  
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in  
whole or in part is prohibited without the prior written consent of the copyright owner. The information  
presented in this document does not form part of any quotation or contract, is believed to be accurate  
and reliable and may be changed without notice.  
UNISONIC TECHNOLOGIES CO., LTD  
10 of 10  
QW-R102-015.D  
www.unisonic.com.tw  

相关型号:

R33LD20G-TB5-T

Fixed Positive LDO Regulator, 3.3V, BIPolar, PZIP5,
UTC

R33LD20G-TN3-D-R

Fixed Positive LDO Regulator
UTC

R33LD20L-TF4-T

Fixed Positive LDO Regulator, 3.3V, 0.5V Dropout, BIPolar, LEAD FREE, TO-220F, 4 PIN
UTC

R33LD20L-TN3-D-T

Fixed Positive LDO Regulator
UTC

R33LD20L-TN3-R

Fixed Positive LDO Regulator
UTC

R33LD20L-TN3-T

Fixed Positive LDO Regulator
UTC

R33LD30-TB5-T

Fixed Positive LDO Regulator, 3.3V, 0.5V Dropout, TO-220B, 5 PIN
UTC

R33LD30-TF4-T

3A OUTPUT TYPE LOW POWER-LOSS VOLTAGE REGULATOR
UTC

R33LD30-TF5-T

3A OUTPUT TYPE LOW POWER-LOSS VOLTAGE REGULATOR
UTC

R33LD30G-TB5-T

Fixed Positive LDO Regulator
UTC

R33LD30G-TF4-T

Fixed Positive LDO Regulator
UTC

R33LD30L-TB5-T

Fixed Positive LDO Regulator, 3.3V, 0.5V Dropout, LEAD FREE, TO-220B, 5 PIN
UTC