SB360G-Z21D-R [UTC]
Rectifier Diode, Schottky, 1 Phase, 1 Element, 3A, 60V V(RRM), Silicon, DO-201AD, HALOGEN FREE PACKAGE-2;型号: | SB360G-Z21D-R |
厂家: | Unisonic Technologies |
描述: | Rectifier Diode, Schottky, 1 Phase, 1 Element, 3A, 60V V(RRM), Silicon, DO-201AD, HALOGEN FREE PACKAGE-2 功效 瞄准线 二极管 |
文件: | 总3页 (文件大小:108K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UNISONIC TECHNOLOGIES CO., LTD
SB360
Preliminary
DIODE
3.0A SCHOTTKY BARRIER
RECTIFIER
1
DESCRIPTION
The UTC SB360 is 3.0A schottky barrier rectifier. it uses UTC’s
advanced technology to provide customers with high current
capability and low forward voltage drop, etc.
The UTC SB360 is suitable for free wheeling, low voltage and
polarity protection applications, etc.
DO-201AD
2
FEATURES
* Low forward voltage drop
* High surge capability
* Low power loss
* High efficiency
* High current capability
ORDERING INFORMATION
Ordering Number
Pin Assignment
Package
Packing
Tape Reel
Lead Free
Halogen Free
SB360G-Z21D-R
1
2
SB360L-Z21D-R
DO-201AD
K
A
Note: Pin Assignment: A: Anode, K: Cathode
www.unisonic.com.tw
1 of 3
Copyright © 2013 Unisonic Technologies Co., Ltd
QW-R601-081.a
SB360
Preliminary
DIODE
ABSOLUTE MAXIMUM RATINGS (TA=25°C, unless otherwise specified)
PARAMETER
SYMBOL
VR
RATINGS
UNIT
DC Blocking Voltage
60
60
60
42
3.0
V
V
V
V
A
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
VRRM
VRWM
VR(RMS)
IO
RMS Reverse Voltage
Average Rectified Output Current (Note 2)
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half Sine-Wave Superimposed on Rated
Load (JEDEC Method)
IFSM
80
A
Forward Voltage (Note 3)
Peak Reverse Current
at Rated DC Blocking Voltage (Note 3)
Junction to Ambient (Note 4)
Junction to Lead (Note 4)
Storage Temperature
IF=3.0A
VFM
IRM
0.74
0.5
V
mA
mA
°C/W
°C/W
°C
TA=25°C
TA=100°C
10
θJA
θJL
30
10
TJ
-65~+150
-65~+150
Operating Junction Temperature
TSTG
°C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. Measured at ambient temperature at a distance of 9.5mm from the case.
3. Short duration pulse test used to minimize self-heating effect.
4. Thermal resistance from junction to lead vertical P.C.B. mounted, 0.500" (12.7mm) lead length with
2.5x2.5" (63.5x63.5mm) copper pad.
UNISONIC TECHNOLOGIES CO., LTD
2 of 3
QW-R601-081.a
www.unisonic.com.tw
SB360
Preliminary
DIODE
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
3 of 3
QW-R601-081.a
www.unisonic.com.tw
相关型号:
©2020 ICPDF网 联系我们和版权申明