SK1826G-AE3-R [UTC]

BIPOLAR LATCH TYPE HALL EFFECT FOR HIGH-TEMPERATURE OPERATION;
SK1826G-AE3-R
型号: SK1826G-AE3-R
厂家: Unisonic Technologies    Unisonic Technologies
描述:

BIPOLAR LATCH TYPE HALL EFFECT FOR HIGH-TEMPERATURE OPERATION

文件: 总5页 (文件大小:193K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
UNISONIC TECHNOLOGIES CO., LTD  
SK1826  
LINEAR INTEGRATED CIRCUIT  
BIPOLAR LATCH TYPE HALL  
EFFECT FOR  
HIGH-TEMPERATURE  
OPERATION  
1
SIP-3  
DESCRIPTION  
The UTC SK1826 is a semiconductor integrated circuit utilizing  
3
the Hall effect. It designed to operate in the alternating magnetic field  
especially at low supply voltage and operation over extended  
temperature ranges to +125°С.  
2
1
This Hall IC is suitable for application to various kinds of  
sensors, contact-less switches, such as Speed sensor, Position  
sensor, Rotation sensor, Contact-less sensor, and Motor control.  
SOT-23  
(EIAJ SC-59)  
FEATURES  
* Wide Supply Voltage Range of 2.5V to 24V  
* Wide Temperature Operation Range of -30°С ~+125°С  
* Alternating Magnetic Field Operation  
* Built-in Protection Diode  
* TTL and MOS IC are Directly Drivable by the Output  
* The life is Semi Permanent because it Employs Contact-Less Parts  
ORDERING INFORMATION  
Ordering Number  
Package  
Pin Assignment  
Packing  
1
I
2
3
Lead Free  
Halogen Free  
SK1826G-AE3-R  
SK1826G-G03-B  
SK1826G-G03-K  
SK1826L-AE3-R  
SK1826L-G03-B  
SK1826L-G03-K  
SOT-23  
SIP-3  
O
G
G
G
O
O
Tape Reel  
Tape Box  
Bulk  
I
SIP-3  
I
Note: Pin Assignment: I: VCC O:VOUT G:GND  
MARKING  
SIP-3  
SOT-23  
www.unisonic.com.tw  
1 of 5  
Copyright © 2018 Unisonic Technologies Co., Ltd  
QW-R118-030.C  
SK1826  
LINEAR INTEGRATED CIRCUIT  
BLOCK DIAGRAM  
UNISONIC TECHNOLOGIES CO., LTD  
2 of 5  
QW-R118-030.C  
www.unisonic.com.tw  
SK1826  
LINEAR INTEGRATED CIRCUIT  
ABSOLUTE MAXIMUM RATINGS (TA=25°С, unless otherwise specified)  
PARAMETER  
SYMBOL  
VCC  
RATINGS  
2.5 ~ 24  
30  
UNIT  
V
Supply Voltage  
Supply Current  
ICC  
mA  
mW  
mW  
°С  
SIP-3  
400  
Power Dissipation  
PD  
SOT-23  
200  
Operating Temperature  
Storage Temperature  
TOPR  
TSTG  
-30 ~ +125  
-40 ~ +150  
°С  
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.  
Absolute maximum ratings are stress ratings only and functional device operation is not implied.  
ELECTRICAL CHARACTERISTICS (TA=25°С, unless otherwise specified)  
PARAMETER  
SYMBOL  
VOL  
TEST CONDITIONS  
VCC = 16V, B=30 mT  
MIN TYP MAX UNIT  
0.2  
0.3  
3.5  
5.5  
0.7  
0.7  
6
V
Low-Level Output Voltage  
Supply Current  
VCC =3.6V, B=30 mT  
VCC =16V  
V
mA  
mA  
μS  
μS  
ICC  
VCC =3.6V  
10  
5
TR  
TF  
VCC =16V, CL=10pF  
VCC =16V, CL=10pF  
Output Switching Time  
1
MAGNETIC CHARACTERISTICS  
Operate Point  
BOP  
BRP  
At TA=25°С  
At TA=25°С  
At TA=25°С  
5
mT  
mT  
mT  
Release Point  
-5  
10  
Hysteresis  
BHYS  
5.5  
Notes: 1. BOP=operate point (output turns ON); BRP =release point (output turns OFF); BHYS =hysteresis(BOP – BRP).  
As used here, negative flux densities are defined as less than zero (algebraic convention). Typical values  
are at TA=25°С and VCC =12V.  
2. 1mT=10 gauss  
UNISONIC TECHNOLOGIES CO., LTD  
3 of 5  
QW-R118-030.C  
www.unisonic.com.tw  
SK1826  
LINEAR INTEGRATED CIRCUIT  
PACKAGE INFORMATION  
Fig. 1 SENSOR LOCATIONS  
Fig. 2 APPLYING DIRECTION OF MAGNETIC FLUX  
UNISONIC TECHNOLOGIES CO., LTD  
4 of 5  
QW-R118-030.C  
www.unisonic.com.tw  
SK1826  
LINEAR INTEGRATED CIRCUIT  
TEST CIRCUIT  
SK1826  
DO  
10P  
VIN  
UTC assumes no responsibility for equipment failures that result from using products at values that  
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other  
parameters) listed in products specifications of any and all UTC products described or contained herein.  
UTC products are not designed for use in life support appliances, devices or systems where malfunction  
of these products can be reasonably expected to result in personal injury. Reproduction in whole or in  
part is prohibited without the prior written consent of the copyright owner. UTC reserves the right to  
make changes to information published in this document, including without limitation specifications and  
product descriptions, at any time and without notice. This document supersedes and replaces all  
information supplied prior to the publication hereof.  
UNISONIC TECHNOLOGIES CO., LTD  
5 of 5  
QW-R118-030.C  
www.unisonic.com.tw  

相关型号:

SK1826G-G03-B

BIPOLAR LATCH TYPE HALL EFFECT FOR HIGH-TEMPERATURE OPERATION
UTC

SK1826G-G03-K

BIPOLAR LATCH TYPE HALL EFFECT FOR HIGH-TEMPERATURE OPERATION
UTC

SK1826L-AE3-R

BIPOLAR LATCH TYPE HALL EFFECT FOR HIGH-TEMPERATURE OPERATION
UTC

SK1826L-G03-B

BIPOLAR LATCH TYPE HALL EFFECT FOR HIGH-TEMPERATURE OPERATION
UTC

SK1826L-G03-K

BIPOLAR LATCH TYPE HALL EFFECT FOR HIGH-TEMPERATURE OPERATION
UTC

SK1830D2

Surface Mount Schottky Rectifiers - Single Diode
DIOTEC

SK1840D2

Surface Mount Schottky Rectifiers - Single Diode
DIOTEC

SK1845D2

Surface Mount Schottky Rectifiers - Single Diode
DIOTEC

SK1845D2-3G

Rectifier Diode,
DIOTEC

SK1845D2R

暂无描述
DIOTEC

SK18B

SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
PACELEADER

SK18B

SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS
SEMTECH