SK6908_07 [UTC]
SINGLE-PHASE DC-FAN MOTOR DRIVER; 单相直流风扇电机驱动器型号: | SK6908_07 |
厂家: | Unisonic Technologies |
描述: | SINGLE-PHASE DC-FAN MOTOR DRIVER |
文件: | 总6页 (文件大小:133K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UNISONIC TECHNOLOGIES CO., LTD
SK6908
LINEAR INTEGRATED CIRCUIT
SINGLE-PHASE DC-FAN
MOTOR DRIVER
DESCRIPTION
SK6908 is a single-phase driver for dc-fan motors. It provides
high efficiency, low noise output and supports the functions of motor
lock protection, auto restart and rotation detection.
FEATURES
*Wide supply voltage range of 2.5V to 20V
*Output current IO(MAX)=600mA
*Operate with Hall element
*Lock protection
*Auto-restart when the motor lock is undone
*FG(frequency generator) output
*Package type SOP-8 and HSOP-8 expose
*Pb-free plating product number: SK6908L
ORDERING INFORMATION
Ordering Number
Package
Packing
Normal
Lead Free Plating
SK6908-S08-R
SK6908-S08-T
SK6908-SH2-R
SK6908-SH2-T
SK6908L-S08-R
SK6908L-S08-T
SK6908L-SH2-R
SK6908L-SH2-T
SOP-8
SOP-8
Tape Reel
Tube
HSOP-8
HSOP-8
Tape Reel
Tube
SK6908L-S08-R
(1)Packing Type
(2)Package Type
(3)Lead Plating
(1) R: Tape Reel, T: Tube
(2) S08: SOP-8, SH2: HSOP-8
(3) L: Lead Free Plating, Blank: Pb/Sn
www.unisonic.com.tw
1 of 6
Copyright © 2007 Unisonic Technologies Co., Ltd
QW-R109-025.B
SK6908
LINEAR INTEGRATED CIRCUIT
PIN CONFIGURATION
OUT2
GND
OUT1
H-
1
2
3
4
8
7
6
5
FG
CT
VCC
H+
BLOCK DIAGRAM
REGULATOR
FG output
Vcc
CONTROL
BLOCK
OUT 1
OUT 2
H+
H-
Hysteresis
Amplifier
LOCK PROTECTION
AUTORESTART
BLOCK
CT
TSD
GND
UNISONIC TECHNOLOGIES CO., LTD
2 of 6
QW-R109-025.B
www.unisonic.com.tw
SK6908
LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATINGS (Ta = 25℃)
PARAMETER
SYMBOL
RATINGS
UNIT
V
Supply Voltage
Supply Current
Circuit Current
FG Output Current
VCC
ICC
IO
20
20
mA
mA
mA
600
20
IFG
Power Dissipation
(Derate at Ta=25℃ reduce 5.5mW/℃)
Output Voltage
SOP-8
700
1000
mW
mW
V
PD
HSOP-8
VOUT
VHIC
TOPR
TSTG
20
Hall Input Common Mode Voltage Range
Operating Temperature
1.0 ~ Vcc-0.5
-20 ~ +100(Note1)
-55 ~ +150
V
℃
Storage Temperature
℃
Note 1.For operation in ambient temperatures above 25℃ ,the driver device must be derated based on a 150℃
maximum temperature
Note 2.Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
Note 3.The device is guaranteed to meet performance specification within 0℃~+70℃ operating temperature range
and assured by design from -20℃~+100℃.
ELECTRICAL CHARACTERISTICS (Ta=25℃ , VCC=5V)
SYMBO
PARAMETER
CONDITIONS
MIN TYP MAX UNIT
L
In drive mode (CT=L)
8
mA
mA
uA
Current Drain
ICC
In lockup protection mode (CT=H )
4.1
2.8
Lockup Detection Capacitor Charge Current
Capacitor Discharge Current
Capacitor Charge/Discharge Current Ratio
CT charge Voltage
ICT1 V 1PIN = 1.1V
ICT2 V 1PIN = 1.1V
RCT
2
4
0.3 0.5 0.8
5.6
uA
VCT1
1.9
V
V
V
V
CT Discharge Voltage
VCT2
0.7
Output Low Level Voltage
VOL IO=200mA
VOH IO=200mA
0.3 0.7
3.9 4.1
Output High Level Voltage
Zero peak value
VHIN
Hall Input Sensitivity
3
15
mV
(including offset and hysteresis)
Hall Input-Output Gain
GHO
320 500 680
0.3 0.5
FG Output Pin Low Voltage
FG Output Pin Leakage Current
VFG IFG=5mA
IFG(LEAK) VFG=15V
V
0
10
uA
HALL SINGLE INPUT-OUTPUT TRUTH VALUE TABLE
H+
H
H-
L
OUT1
OUT2
FG
H
L
L
H
L
L
H
H
* CT=0V
UNISONIC TECHNOLOGIES CO., LTD
3 of 6
QW-R109-025.B
www.unisonic.com.tw
SK6908
LINEAR INTEGRATED CIRCUIT
LOCKUP PROTECTION / AUTOMATIC RECOVERY
Fig. 1
H+
OUT1
VCT1
Toff
Ton
VCT2
FG
depend on the hall output
motor lock detect lock
lock cancel
release
C × (VCT1-VCT2)
C × (VCT1-VCT2)
Ton (charge time) =
Toff (charge time) =
ICT1
ICT2
C : Value of capcitor at CT terminal
UNISONIC TECHNOLOGIES CO., LTD
4 of 6
QW-R109-025.B
www.unisonic.com.tw
SK6908
LINEAR INTEGRATED CIRCUIT
POWER DISSIPATION
Fig.-2
The maximum junctions temperature is 150°C in plastic packages, but for reasons of reliability, a lower number may
be mandated.
PT = TJ(MAX) – Ta (MAX) / θJA
PT = Total Power Dissipated by the Device
T
J (MAX) = Maximum Junction Temperature
Ta(MAX) = Maximum Ambient Temperature
JA = 175°C/W
θ
THERMAL SHUTDOWN (TSD)
Fig.-3
OUTPUT OFF
OUTPUT ON
TSD ON
TSD ON ( Typ : 175℃ )
TSD OFF ( Typ : 150℃ )
TSD OFF
150℃
175℃
Junction Temperature (℃)
UNISONIC TECHNOLOGIES CO., LTD
5 of 6
QW-R109-025.B
www.unisonic.com.tw
SK6908
LINEAR INTEGRATED CIRCUIT
TYPICAL APPLICATION CIRCUIT
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
6 of 6
QW-R109-025.B
www.unisonic.com.tw
相关型号:
©2020 ICPDF网 联系我们和版权申明