TA31001L-D08-T [UTC]

TELEPHONE TONE RINGER; 电话音调振铃
TA31001L-D08-T
型号: TA31001L-D08-T
厂家: Unisonic Technologies    Unisonic Technologies
描述:

TELEPHONE TONE RINGER
电话音调振铃

电话
文件: 总6页 (文件大小:195K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
UNISONIC TECHNOLOGIES CO., LTD  
TA31001  
LINEAR INTEGRATED CIRCUIT  
TELEPHONE TONE RINGER  
„
DESCRIPTION  
The UTC TA31001 is a bipolar integrated circuit designed for  
telephone bell replacement. It can also be used as alarms or other  
alerting devices.  
„
FEATURES  
*Designed for Telephone Bell Replacement.  
*Low Current Drain for Multiple Extension of Lines.  
*Adjustable 2-Frequency Tone.  
DIP-8  
*Adjustable Warbling Rate.  
*Built-in Hysteresis Prevents False Triggering and Rotary Dial 'CHIRPS'.  
*Programmable for Initiation Voltage by Simple External Resistor.  
„
ORDERING INFORMATION  
Ordering Number  
Package  
DIP-8  
Packing  
Tube  
Lead Free  
Halogen Free  
TA31001G-D08-T  
TA31001L-D08-T  
www.unisonic.com.tw  
Copyright © 2010 Unisonic Technologies Co.,LTD  
1 of 6  
QW-R108-003.C  
TA31001  
LINEAR INTEGRATED CIRCUIT  
„
PIN CONFIGURATIONS  
Vcc  
1
2
3
4
8
7
6
5
Output  
High Freq.  
Time Constant  
RSL  
Low Freq.  
Time Constant  
High Freq.  
Time Constant  
Low Freq.  
Time Costant  
GND  
UNISONIC TECHNOLOGIES CO., LTD  
2 of 6  
QW-R108-003.C  
www.unisonic.com.tw  
TA31001  
LINEAR INTEGRATED CIRCUIT  
„
BLOCK DIAGRAM  
R1  
R2  
C2  
4
7
6
HIGH  
OSC  
AMP  
8
OUTPUT  
LOW  
OSC  
3
1
C1  
POWER SUPPLY (WITH HYSTERESIS)  
5
2
Note:R1,R2,C1 and C2 are parts externally mounted  
UNISONIC TECHNOLOGIES CO., LTD  
3 of 6  
QW-R108-003.C  
www.unisonic.com.tw  
TA31001  
LINEAR INTEGRATED CIRCUIT  
„
ABSOLUTE MAXIMUM RATINGS (Ta=25°C)  
PARAMETER  
SYMBOL  
VCC  
VALUE  
30  
UNIT  
V
Supply Voltage  
Power Dissipation  
PD  
800  
mW  
°C  
°C  
Ambient Operating Temperature  
Storage Temperature  
TOPR  
TSTG  
-45 to 85  
-65 to 150  
„
ELECTRICAL CHARACTERISTICS (Ta=25°C)  
(All voltage referenced to GND unless otherwise specified)  
PARAMETER  
SYMBOL  
VCC  
TEST CONDITIONS  
MIN  
TYP  
MAX  
29  
UNIT  
Operating Supply Voltage  
Initiation Supply Voltage (Note 1)  
Initiation Supply Current (Note 1)  
Sustaining Voltage (Note 2)  
Sustaining Current (Note 2)  
Trigger Voltage (Note 3)  
Trigger Current (Note 3)  
Disable Voltage (Note 4)  
Disable Current (Note 4)  
V
V
VSI  
17  
1.4  
9.7  
0.7  
9
19  
3.5  
11  
21  
ISI  
6.8K-Pin 2 to GND  
4.2  
12  
mA  
V
VSUS  
ISUS  
See Fig.1  
No Load VCC=VSUS  
VCC=15V  
1.4  
10.5  
20  
2.5  
12  
10005  
mA  
V
VTRG  
ITRG  
VCC=15V  
10  
μA  
V
VDIS  
IDIS  
0.8  
-40  
-50  
19  
μA  
V
CC=21V, I8=-15mA  
Pin6=6V, Pin7=GND  
CC=21V, I8=15mA  
Pin6=GND, Pin7=6V  
Output Voltage High  
Output Voltage Low  
VOH  
VOL  
17.0  
21  
V
V
V
1.6  
Input Current 1  
Input Current 2  
High Frequency 1  
High Frequency 2  
Low Frequency  
IIN(Pin 3) Pin3=6V, Pin4=GND  
IIN(Pin 7) Pin7=6V, Pin6=GND  
500  
500  
563  
704  
11  
nA  
nA  
Hz  
Hz  
Hz  
FH1  
FH2  
FL  
R3=191K, C3=6800pF  
R3=191K, C3=6800pF  
R2=165K, C2=0.47μF  
461  
576  
9
512  
640  
10  
Note 1. Initiation supply voltage (VSI) is the supply voltage required to start the tone ringer oscillating.  
2. Sustaining voltage (VSUS) is the supply voltage required to maintain oscillation.  
3. VTR and ITR are the conditions applied to trigger in to start oscillation for VSUSVCCVSI  
4. VDLS and IDIS are the conditions applied to trigger in to inhibit oscillation for VSIVCC  
5. Trigger current must be limited to this value externally.  
UNISONIC TECHNOLOGIES CO., LTD  
4 of 6  
QW-R108-003.C  
www.unisonic.com.tw  
TA31001  
LINEAR INTEGRATED CIRCUIT  
TYPICAL CHARACTERISTICS  
UNISONIC TECHNOLOGIES CO., LTD  
5 of 6  
QW-R108-003.C  
www.unisonic.com.tw  
TA31001  
LINEAR INTEGRATED CIRCUIT  
„
APPLICATION CIRCUIT  
Figure 1  
UTC assumes no responsibility for equipment failures that result from using products at values that  
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or  
other parameters) listed in products specifications of any and all UTC products described or contained  
herein. UTC products are not designed for use in life support appliances, devices or systems where  
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in  
whole or in part is prohibited without the prior written consent of the copyright owner. The information  
presented in this document does not form part of any quotation or contract, is believed to be accurate  
and reliable and may be changed without notice.  
UNISONIC TECHNOLOGIES CO., LTD  
6 of 6  
QW-R108-003.C  
www.unisonic.com.tw  

相关型号:

TA31001P

Telephone Ringer
ETC

TA31001_10

TELEPHONE TONE RINGER
UTC

TA31001_15

TELEPHONE TONE RINGER
UTC

TA31002

TELEPHONE TONE RINGER
UTC

TA31002(8DIP)

Telephone Circuit, PDIP8
UTC

TA31002-D08-T

TELEPHONE TONE RINGER
UTC

TA31002A

TELEPHONE TONE RINGER
UTC

TA31002AF

Telephone Ringer
ETC

TA31002AF(EL)

IC TELEPHONE RINGER CKT, PDSO8, 0.225 INCH, PLASTIC, SOP-8, Telephone Circuit
TOSHIBA

TA31002AF(ER)

IC TELEPHONE RINGER CKT, PDSO8, 0.225 INCH, PLASTIC, SOP-8, Telephone Circuit
TOSHIBA

TA31002AP

Telephone Ringer
ETC

TA31002F

Telephone Ringer
ETC