TA31002L-D08-T [UTC]
TELEPHONE TONE RINGER; 电话音调振铃型号: | TA31002L-D08-T |
厂家: | Unisonic Technologies |
描述: | TELEPHONE TONE RINGER |
文件: | 总6页 (文件大小:63K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UNISONIC TECHNOLOGIES CO., LTD
TA31002
LINEAR INTEGRATED CIRCUIT
TELEPHONE TONE RINGER
ꢀ
DESCRIPTION
The UTC TA31002 is a bipolar integrated circuit designed for
telephone bell replacement. It can also be used as alarms or other
alerting devices.
ꢀ
FEATURES
*Current consumption is small. (at no-load)
*Package is compaction. (DIP-8 pin)
*Oscillation frequency is variable.
DIP-8
*Built-in threshold circuits prevent false triggering due
to power noise as well as “chirps” due to rotary dial.
*Few external components.
*Pb-free plating product number: TA31002L
ꢀ ORDERING INFORMATION
Ordering Number
Package
DIP-8
Packing
Tube
Normal
Lead Free Plating
TA31002L-D08-T
TA31002-D08-T
TA31002L-D08-T
(1)Packing Type
(2)Package Type
(3)Lead Plating
(1) T: Tube
(2) D08: DIP-8
(3) Lead Free Plating, Blank: Pb/Sn
www.unisonic.com.tw
1 of 4
Copyright © 2005 Unisonic Technologies Co., Ltd
QW-R108-004.B
TA31002
LINEAR INTEGRATED CIRCUIT
ꢀ
PIN CONFIGURATIONS
Vcc
1
2
3
4
8
7
6
5
Output
High Freq.
Time Constant
RSL
Low Freq.
Time Constant
High Freq.
Time Constant
Low Freq.
Time Costant
GND
UNISONIC TECHNOLOGIES CO., LTD
2 of 6
QW-R108-004.B
www.unisonic.com.tw
TA31002
LINEAR INTEGRATED CIRCUIT
ꢀ
BLOCK DIAGRAM
R1
R2
C2
4
7
6
HIGH
OSC
AMP
8
OUTPUT
LOW
OSC
3
1
C1
POWER SUPPLY (WITH HYSTERESIS)
5
2
Note:R1,R2,C1 and C2 are parts externally mounted
UNISONIC TECHNOLOGIES CO., LTD
3 of 6
QW-R108-004.B
www.unisonic.com.tw
TA31002
LINEAR INTEGRATED CIRCUIT
ꢀ
ABSOLUTE MAXIMUM RATINGS (Ta=25°C)
PARAMETER
SYMBOL
VCC
RATINGS
30
UNIT
V
Power Supply Voltage
Power Dissipation
PD
800
mW
°C
°C
Operating Temperature
Storage Temperature
TOPR
TSTG
-40 ~ +85
-55 ~ +150
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
ꢀ
ELECTRICAL CHARACTERISTICS (Ta=25°C)
(All voltage referenced to GND unless otherwise specified)
PARAMETER
Operating Voltage
SYMBOL
VOPR
Vsi
TEST CONDITIONS
(note 1)
MIN
TYP
MAX UNIT
29
21
V
V
Initiation Supply Voltage
17
10.5
1.4
0.7
9
19
12
Sustaining Supply Voltage
Initiation Current Consumption
Sustaining Current Consumption
Vsus
Isi
(note 2)
-
V
3.3
1.4
10
4.2
2.5
11
mA
mA
Hz
Hz
Hz
No-Load
Isus
Fl
C1=0.47µF, R1=165kΩ
C2=6800pF, R2=191kΩ
Oscillation Frequency (not3)
fH1
461
576
512
640
563
703
fH2
Vcc=24V, VOH=-10mA
PIN7=GND
Output Voltage “H” Level
Output Voltage “L” Level
VOH
VOL
20.0
0.7
21.5
1.0
22.5
2.0
V
V
Vcc=24V, VOL=10mA
PIN7=7V
*Note : 1. Initiation supply voltage (Vsi) is a supply voltage required to start oscillation of the tone ringer.
2. Sustaining supply voltage (Vsus) is a supply voltage required to maintain oscillation of the tone ringer.
3. Oscillation frequency is determined by the following equations 1, 2, and 3.
(1) fL=1/1.234•R1•C1 (Hz) ; (2)fH1=1/1.515•R2•C2 (Hz); (3)fH2=1.24 fH1(Hz)
UNISONIC TECHNOLOGIES CO., LTD
4 of 6
QW-R108-004.B
www.unisonic.com.tw
TA31002
LINEAR INTEGRATED CIRCUIT
ꢀ
APPLICATION NOTE
In the UTC TA31002 the initiation current consumption (Isi) can be changed by using the RSL terminal. The
resistor RSL is connected to GND from PIN2 as shown in fig.1. Further, the initation current consumption (Isi) can
be changed by changing the value of RSL.
Fig.2 show the graph of Vs-Is characteristic at the time when RSL has been changed to three values. The Vs-Is
characteristic in UTC TA31002 at the time when RSL=6.8kΩ coincides with that at the time when PIN2 of the
TA31001 has been used at an open state.
Vs
LS
1
2
UTC TA31002
RSL
5
GND
FIG.1
Current Consumption
(mA)
5
4
3
2
1
Is
R
SL=3.3kΩ
SL=6.8kΩ
SL=13kΩ
R
R
Vsus Vsi
10
20
30
Vs
Supply Voltage(V)
FIG.2
UNISONIC TECHNOLOGIES CO., LTD
5 of 6
QW-R108-004.B
www.unisonic.com.tw
TA31002
LINEAR INTEGRATED CIRCUIT
ꢀ
APPLICATION CIRCUIT
TIP
2KΩ
1 µF/250V
104B42
0.22μF
1
2
3
4
8
RSL
61Ω
7
UTC
TA31002
RING
R2
C2
6
5
+
R1
C1
C4
15μF/35V
SP
-
15kΩ
1300:8Ω
fL=1/1.234R1*C1
fH1=1/1.515R2*C2
fH2=1.24fH1
when:
R1=165KΩ
R2=191KΩ
C1=0.47µF/16V C2=0.0068µF/16V
fL≅10Hz fH1≅500Hz fH2≅630Hz
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
6 of 6
QW-R108-004.B
www.unisonic.com.tw
相关型号:
TA31024F-TP1
IC TELEPHONE SPEECH CKT, PDSO24, 0.300 INCH, PLASTIC, SSOP-24, Telephone Circuit
TOSHIBA
TA31024F-TP2
IC TELEPHONE SPEECH CKT, PDSO24, 0.300 INCH, PLASTIC, SSOP-24, Telephone Circuit
TOSHIBA
©2020 ICPDF网 联系我们和版权申明