TL062G-S08-R [UTC]
LOW POWER DUAL J-FET OPERATIONAL AMPLIFIER; 低功耗双J-FET运算放大器
| 型号： | TL062G-S08-R |
| 厂家： | 
Unisonic Technologies |
| 描述： | LOW POWER DUAL J-FET OPERATIONAL AMPLIFIER |
| 文件： | 总8页 (文件大小：310K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
UNISONIC TECHNOLOGIES CO., LTD
TL062
LINEAR INTEGRATED CIRCUIT
LOW POWER DUAL J-FET
OPERATIONAL AMPLIFIER
DESCRIPTION
DIP-8
The UTC TL062 is a high speed J-FET input dual operational
amplifier. It incorporates well matched, high voltage J-FET and
bipolar transistors in a monolithic integrated circuit. The device
features high slew rates, low input bias and offset currents, and low
offset voltage temperature coefficient.
FEATURES
* Very low power consumption
SOP-8
* Wide common-mode (up to VCC+ ) and differential voltage range
* Low input bias and offset current
* Output short-circuit protection
* High input impedance J-FET input stage
* Internal frequency compensation
* Latch up free operation
Lead-free:
Halogen-free: TL062G
TL062L
* Typical supply current: 400μA
ORDERING INFORMATION
Ordering Number
Package
Packing
Normal
Lead Free Plating
TL062L-D08-T
TL062L-S08-R
Halogen Free
TL062G-D08-T
TL062G-S08-R
TL062-D08-T
TL062-S08-R
DIP-8
Tube
SOP-8
Tape Reel
www.unisonic.com.tw
Copyright © 2009 Unisonic Technologies Co., Ltd
1 of 8
QW-R105-003,C
TL062
LINEAR INTEGRATED CIRCUIT
■
PIN CONFIGURATIONS
OUTPUT 1
INVERTING INPUT 1
NON-INVERTING INPUT 1
Vcc-
Vcc+
1
2
3
4
8
7
6
5
OUTPUT 2
INVERTING INPUT 2
NON-INVERTING INPUT 2
UNISONIC TECHNOLOGIES CO., LTD
1 of 8
QW-R105-003,C
www.unisonic.com.tw
TL062
LINEAR INTEGRATED CIRCUIT
■
BLOCK DIAGRAM
UNISONIC TECHNOLOGIES CO., LTD
1 of 8
QW-R105-003,C
www.unisonic.com.tw
TL062
LINEAR INTEGRATED CIRCUIT
■
ABSOLUTE MAXIMUM RATINGS (Ta=25°C)
PARAMETER
SYMBOL
VCC
RATINGS
±18
UNIT
V
Supply Voltage (note 2)
Input Voltage (note 3)
VIN
±15
V
Differential Input Voltage (note 4)
Power Dissipation
VI(DIFF)
PD
±30
V
680
mW
Output Short-Circuit Duration (Note 5)
Operating Temperature
Storage Temperature
Infinite
0 ~ +70
-65 ~ +150
TOPR
TSTG
°C
°C
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. All voltage values, except differential voltage, are with respect to the zero reference level (ground) of the
supply voltages where the zero reference level is the midpoint between VCC- and VCC+.
3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts,
whichever is less.
4. Differential voltages are at the non-inverting input terminal with respect to the inverting input terminal.
5. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be
limited to ensure that the dissipation rating is not exceeded.
ELECTRICAL CHARACTERISTICS (VCC=±15V, Ta=25°C, unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
Ta=25°C
MIN
TYP
3
MAX UNIT
15
20
mV
mV
V
Input Offset Voltage
VI(OFF) RS=50Ω
VI(CM)
TMIN ≤Ta ≤TMAX
Input Common Mode Voltage
Output Voltage Swing
±11 -12~+15
Ta=25°C
20
20
3
27
V
VO(SW) RL=10kΩ,CL=100pF
TMIN ≤Ta ≤TMAX
Ta=25°C
TMIN ≤Ta ≤TMAX
V
6
V/mV
V/mV
Large Signal Voltage Gain
GV
RL=10Ω, VOUT=±10V
RS=50Ω
3
Temperature Coefficient of Input
Offset Voltage
ΔVI(OFF)
ICC
10
μV/°C
Supply Current
Ta=25°C, no load, no signal
Ta=25°C
400
5
500
200
5
μA
pA
Input Offset Current*
Input Bias Current*
II(OFF)
TMIN ≤Ta ≤TMAX
Ta=25°C
nA
30
400
10
pA
II(BIAS)
TMIN ≤Ta ≤TMAX
nA
Gain Bandwidth Product
Input Resistance
GBW Ta=25°C, RL=10kΩ, CL=100Pf
RIN
1
MHz
Ω
1012
76
Common Mode Rejection Ratio
Supply Voltage Rejection Ratio
Slew Rate
CMR RS=50Ω
SVR RS=50Ω
70
70
dB
95
dB
SR
VO1
VO2
VIN=10V, RL=10kΩ, CL=100pF, Gv=1
0.91
1.1
V/μs
Channel Separation
Gv=100, Ta=25°C
120
dB
Total Power Consumption
Rise Time
Ta=25°C, no load, no signal
6
7.5
mW
μs
tR
VIN=20mV, RL=10kΩ, CL=100pF, Gv=1
VIN=20mV, RL=10kΩ, CL=100pF, Gv=1
RS=100Ω, f=1KHz
0.2
10
42
Overshoot Factor
Kov
eN
%
Equivalent Input Noise Voltage
Note: The Input bias currents of a FET-input operational amplifier are normal junction reverse currents, which are
temperature sensitive. Pulse techniques must be used that will maintain the junction temperature as closes to the
ambient temperature as possible.
UNISONIC TECHNOLOGIES CO., LTD
2 of 8
QW-R105-003,C
www.unisonic.com.tw
TL062
LINEAR INTEGRATED CIRCUIT
PARAMETER MEASUREMENT INFORMATION
UNISONIC TECHNOLOGIES CO., LTD
3 of 8
QW-R105-003,C
www.unisonic.com.tw
TL062
LINEAR INTEGRATED CIRCUIT
■
TYPICAL CHARACTERISTICS
Maximum Peak-to-Peak Output Voltage vs. Supply
Voltage
Maximum Peak-to-Peak Output Voltage vs. Free
Air Temp.
30
25
20
15
30
RL = 10kΩ
Ta = +25°C
See figure 2
25
20
15
10
5
10
5
VCC = ±15V
RL = 10kΩ
See figure 2
0
0
2
4
6
8
10
12
14
16
-75 -50 -25
0
25
50
75 100 125
Supply Voltage, VCC (V)
Free Air Temperature (°C)
Maximum Peak-to-Peak Output Voltage vs. Load
Resistance
Maximum Peak-to-Peak Output Voltage vs.
Frequency
30
25
20
15
30
VCC = ±15V
Ta = +25°C
RL = 10kΩ
Ta = +25°C
See figure 2
25
20
15
VCC = ±15V
VCC = ±12V
VCC = ±5V
10
5
10
5
VCC = ±2V
0
0
100 200
400
700 1k 2k
4k
7k 10k
1k
10k
100k
1M
10M
Load Resistance (kΩ)
Frequency (Hz)
Differential Voltage Amplification vs. Free Air
Temperature
Input Bias Current vs. Free Air Temperature
100
10
VCC = ±15V
7
10
4
1
0.1
2
1
VCC = ±15V
RL = 10kΩ
0.01
-75 -50 -25
0
25
50
75 100 125
-50
-25
0
25
50
75
100 125
Free Air Temperature (°C)
Free Air Temperature (°C)
UNISONIC TECHNOLOGIES CO., LTD
4 of 8
QW-R105-003,C
www.unisonic.com.tw
TL062
LINEAR INTEGRATED CIRCUIT
TYPICAL CHARACTERISTICS(Cont.)
UNISONIC TECHNOLOGIES CO., LTD
5 of 8
QW-R105-003,C
www.unisonic.com.tw
TL062
LINEAR INTEGRATED CIRCUIT
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
1 of 8
QW-R105-003,C
www.unisonic.com.tw
相关型号：
TL062I
LOW POWER J-FET DUAL OPERATIONAL AMPLIFIERSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
STMICROELECTR
TL062ID
LOW POWER J-FET DUAL OPERATIONAL AMPLIFIERSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
STMICROELECTR
TL062ID
LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
TL062IDE4
LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
TL062IDG4
LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
TL062IDR
LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
TL062IDRE4
LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
TL062IDRG4
LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
TL062IDT
Low-power JFET dual operational amplifiersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
STMICROELECTR
TL062IH
DUAL OP-AMP, 9000uV OFFSET-MAX, 1MHz BAND WIDTH, MBCY8, TO-99, 8 PINWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
STMICROELECTR
TL062IJG
LOW-POWER JFET-INPUT OPERATIONAL AMPLIFIERSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TI
TL062IN
LOW POWER J-FET DUAL OPERATIONAL AMPLIFIERSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明