TL082L-S08-R [UTC]
GENERAL PURPOSE DUAL J-FET OPERATIONAL AMPLIFIER; 通用双J-FET运算放大器
| 型号： | TL082L-S08-R |
| 厂家： | 
Unisonic Technologies |
| 描述： | GENERAL PURPOSE DUAL J-FET OPERATIONAL AMPLIFIER |
| 文件： | 总9页 (文件大小：300K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
UNISONIC TECHNOLOGIES CO., LTD
TL082
LINEAR INTEGRATED CIRCUIT
GENERAL PURPOSE DUAL
J-FET OPERATIONAL
AMPLIFIER
DESCRIPTION
The UTC TL082 is a high speed J-FET input dual operational
amplifier. It incorporates well matched, high voltage J-FET and
bipolar transistors in a monolithic integrated circuit.
The device features high slew rates, low input bias and offset
current, and low offset voltage temperature coefficient.
FEATURES
* Low input bias and offset current
* Wide common-mode (up to VCC+ ) and differential voltage range
* Output short-circuit protection
Lead-free:
Halogen-free:TL082G
TL082L
* High input impedance J-FET input stage
* Internal frequency compensation
* Latch up free operation
* High slewrate:16V/µs(typ.)
ORDERING INFORMATION
Ordering Number
Package
Packing
Normal
Lead Free Plating
TL082L-D08-T
TL082L-P08-R
TL082L-S08-R
Halogen Free
TL082-D08-T
TL082-P08-R
TL082-S08-R
TL082G-D08-T
TL082G-P08-R
TL082G-S08-R
DIP-8
TSSOP-8
SOP-8
Tube
Tape Reel
Tape Reel
www.unisonic.com.tw
Copyright © 2009 Unisonic Technologies Co., Ltd
1 of 9
QW-R105-019,G
TL082
LINEAR INTEGRATED CIRCUIT
PIN CONFIGURATION
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 9
QW-R105-019,G
TL082
LINEAR INTEGRATED CIRCUIT
BLOCK DIAGRAM
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 9
QW-R105-019,G
TL082
LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATING (Ta=25°C)
PARAMETER
SYMBOL
VCC
RATINGS
±18
UNIT
V
Supply Voltage (Note 2)
Input Voltage (Note 3)
VIN
±15
V
Differential Input Voltage (Note 4)
Power Dissipation
VID
±30
V
PD
680
mW
Output Short-Circuit Duration (Note 5)
Operating Temperature
Infinite
-20 ~ +85
-65 ~ +150
TOPR
TSTG
°C
°C
Storage Temperature Range
Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. All voltage values, except differential voltage, are with respect to the zero reference level (ground) of the
supply voltages where the zero reference level is the midpoint between VCC- and VCC+.
3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts,
whichever is less.
4. Differential voltages are at the non-inverting input terminal with respect to the inverting input terminal.
5. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be
limited to ensure that the dissipation rating is not exceeded.
THERMAL DATA
PARAMETER
SYMBOL
RATINGS
125
85
UNIT
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
SOP-8
DIP-8
Junction to Ambient
Junction to Case
θJA
TSSOP-8
SOP-8
DIP-8
120
40
θJC
41
TSSOP-8
37
ELECTRICAL CHARACTERISTICS
( VCC=±15V, Ta=25°C, TMIN=0°C, TMAX=70°C , unless otherwise specified)
PARAMETER
Input Offset Voltage (RS=50Ω)
Input Offset Voltage Drift
Input Offset Current (Note)
SYMBOL
TEST CONDITIONS
Ta=25°C
MIN
TYP
MAX
10
UNIT
mV
3
VIO
TMIN ≤Ta ≤TMAX
13
DVIO
10
5
µV/°C
pA
nA
pA
nA
V
Ta=25°C
100
10
IIO
TMIN ≤Ta ≤TMAX
Ta=25°C
20
400
20
Input Bias Current (Note)
IIB
TMIN ≤Ta ≤TMAX
Input Common Mode Voltage Range
VICM
±11 -12~+15
Ta=25°C, RL=2kΩ,
Ta=25°C, RL=10kΩ
TMIN ≤Ta ≤TMAX, RL=2kΩ
TMIN ≤Ta≤ TMAX, RL=10kΩ
Ta=25°C
10
12
10
12
25
15
12
V
13.5
V
Output Voltage Swing
±VOPP
Avd
V
V
Large Signal Voltage Gain
(RL=2kΩ, VOUT=±10V)
200
4
V/mV
TMIN ≤Ta ≤TMAX
VIN=10mV, RL=2kΩ, CL=100pF,
f=100kHZ
Gain Bandwidth Product (Ta=25°C)
GBP
RI
2.5
MHz
Ω
Input Resistance
1012
86
Common Mode Rejection Ratio
(RS=50Ω)
Ta=25°C
70
70
70
70
CMR
dB
TMIN ≤Ta ≤TMAX
Ta=25°C
Supply Voltage Rejection Ratio
(RS=50Ω)
86
SVR
dB
TMIN ≤Ta ≤TMAX
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 9
QW-R105-019,G
TL082
LINEAR INTEGRATED CIRCUIT
ELECTRICAL CHARACTERISTICS (Cont.)
PARAMETER
SYMBOL
ICC
TEST CONDITIONS
Ta=25°C
MIN
TYP
3.6
MAX
5.6
UNIT
mA
Supply Current, No Load
Channel Separation
(Av=100, Ta=25°C)
V01/V02
120
40
dB
Ta=25°C
10
10
60
60
mA
mA
Output Short-Circuit Current
Slew Rate (Ta=25°C)
IOS
TMIN ≤Ta ≤TMAX
VIN=10V, RL=2kΩ
CL=100pF, unity gain
SR
8
16
0.1
10
V/µs
µs
VIN =20mV, RL=2kΩ
Rise Time (Ta=25°C)
tR
CL=100pF, unity gain
VIN=20mV, RL=2kΩ
CL=100pF, unity gain
AV=20dB, f=1kHz, RL=2kΩ,
CL=100pF, VOUT=2Vpp)
Overshoot (Ta=25°C)
KOV
%
Total Harmonic Distortion (Ta=25°C)
THD
Φm
eN
0.01
45
%
Phase Margin
Degrees
nV
Equivalent Input Noise Voltage
(RS=100Ω, f=1KHz)
15
Hz
Note: The Input bias currents are junction leakage currents, which approximately double for every 10°C increase in
the junction temperature.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
5 of 9
QW-R105-019,G
TL082
LINEAR INTEGRATED CIRCUIT
PARAMETER MEASUREMENT INFORMATION
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
6 of 9
QW-R105-019,G
TL082
LINEAR INTEGRATED CIRCUIT
TYPICAL APPLICATION CIRCUIT
100 KHz Quadruple Oscillators
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
7 of 9
QW-R105-019,G
TL082
LINEAR INTEGRATED CIRCUIT
TYPICAL CHARACTERISTICS
UNISONIC TECHNOLOES CO., LTD
www.unisonic.com.tw
8 of 9
QW-R105-019,G
TL082
LINEAR INTEGRATED CIRCUIT
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
9 of 9
QW-R105-019,G
相关型号：
©2020 ICPDF网 联系我们和版权申明