U74ACT14 [UTC]

HEX SCHMITT-TRIGGER INVERTERS; 六角施密特触发反相器
U74ACT14
型号: U74ACT14
厂家: Unisonic Technologies    Unisonic Technologies
描述:

HEX SCHMITT-TRIGGER INVERTERS
六角施密特触发反相器

文件: 总4页 (文件大小:155K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
UNISONIC TECHNOLOGIES CO., LTD  
U74ACT14  
CMOS IC  
HEX SCHMITT-TRIGGER  
INVERTERS  
„
DESCRIPTION  
The U74ACT14 contains six inverters with Schmitt-trigger, provides  
the Function Y = A .  
The U74ACT14 have hysteresis between the positive-going and  
negative-going and negative-going input thresholds.  
„
FEATURES  
* Inputs are TTL-Voltage Compatible  
* Outputs source/sink 24mA  
* Pb-Free Packages are available  
*Pb-free plating product number:  
U74ACT14L  
„
ORDERING INFORMATION  
Ordering Number  
Package  
Packing  
Normal  
Lead Free Plating  
U74ACT14L-D14-T  
U74ACT14L-S14-T  
U74ACT14L-S14-R  
U74ACT14L-P14-T  
U74ACT14-D14-T  
U74ACT14-S14-T  
U74ACT14-S14-R  
U74ACT14-P14-T  
DIP-14  
SOP-14  
Tube  
Tube  
SOP-14  
Tape Reel  
Tube  
TSSOP-14  
www.unisonic.com.tw  
Copyright © 2008 Unisonic Technologies Co., Ltd  
1 of 4  
QW-R502-195.A  
U74ACT14  
CMOS IC  
„
PIN CONFIGURATION  
1
2
3
4
5
6
7
14  
VCC  
1A  
1Y  
13 6A  
12 6Y  
2A  
2Y  
11  
5A  
3A  
10 5Y  
3Y  
9
8
4A  
4Y  
GND  
„
FUNCTIONAL DIAGRAM  
„
„
FUNCTION TABLE  
INPUT  
OUTPUT  
A
L
Y
H
L
H
LOGIC DIAGRAM (positive logic)  
IEC logic symbol  
UNISONIC TECHNOLOGIES CO., LTD  
2 of 4  
QW-R502-195.A  
www.unisonic.com.tw  
U74ACT14  
CMOS IC  
„
ABSOLUTE MAXIMUM RATINGS (unless otherwise specified)  
PARAMETER  
SYMBOL  
VCC  
RATINGS  
-0.5~7  
UNIT  
V
Supply Voltage  
Input Voltage  
VIN  
-0.5~ VCC+0.5  
-0.5~VCC+0.5  
±20  
V
Output Voltage  
VOUT  
IIK  
V
Input Clamp Current  
Output Clamp Current  
Output Current  
mA  
mA  
mA  
mA  
IOK  
±20  
IOUT  
ICC  
±50  
VCC or GND Current  
Storage Temperature  
±50  
TSTG  
-65 ~ +150  
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.  
Absolute maximum ratings are stress ratings only and functional device operation is not implied.  
„
RECOMMENDED OPERATING CONDITIONS  
PARAMETER  
SYMBOL  
MIN  
4.5  
0
TYP  
MAX  
5.5  
UNIT  
V
Supply Voltage  
VCC  
VIN  
Input Voltage  
VCC  
VCC  
+85  
V
Output Voltage  
VOUT  
TA  
0
V
Operating Temperature  
-40  
„
ELECTRICAL CHARACTERISTICS (Ta=25°C)  
PARAMETER  
SYMBOL  
VIH  
TEST CONDITIONS  
VCC=4.5V  
MIN  
TYP MAX UNIT  
2.0  
2.0  
V
V
High-Level Input Voltage  
VCC=5.5V  
VCC=4.5V  
0.8  
0.8  
1.4  
1.6  
V
V
Low-Level Input Voltage  
Hysteresis  
VIL  
VCC=5.5V  
VCC=4.5V  
0.4  
0.5  
V
VTH  
VCC=5.5V  
V
VCC=4.5V, IOH=-50μA  
VCC=5.5V, IOH=-50μA  
VCC=4.5V, IOH=-24mA  
4.34  
5.4  
4.49  
5.49  
V
V
High-Level Output Voltage  
Low-Level Output Voltage  
VOH  
3.86  
4.86  
V
VCC=5.5V, IOH=-24mA  
V
VCC=4.5V, IOL=50μA  
VCC=5.5V, IOL=50μA  
VCC=4.5V, IOL=24mA  
0.001  
0.001  
0.1  
0.1  
V
V
VOL  
0.36  
0.36  
±0.1  
V
VCC=5.5V, IOL=24mA  
V
Input Leakage Current  
Maximum Icc/Input  
II(LEAK)  
ICCT  
IQ  
VCC=5.5V, VIN=5.5V or GND  
VCC=5.5V, VIN=VCC-2.1V  
μA  
mA  
μA  
pF  
0.6  
4.5  
Quiescent Supply Current  
Input Capacitance  
VCC=5.5V, VIN=VCC or GND, IOUT=0  
VCC=OPEN  
2.0  
CIN  
Note: Not more than one output should be tested at a time, and the duration of the test should not exceed 2 ms.  
„
SWITCHING CHARACTERISTICS (Ta=25°C)  
PARAMETER  
SYMBOL  
tPLH  
TEST CONDITIONS  
VCC=5.0V±0.5V, CL=50pF  
VCC=5.0V±0.5V, CL=50pF  
MIN  
3.0  
TYP MAX UNIT  
Propagation delay from input  
(A) to output(Y)  
8.0  
8.0  
10.0  
10.0  
ns  
ns  
tPHL  
3.0  
„
OPERATING CHARACTERISTIC  
PARAMETER  
Power Dissipation Capacitance  
SYMBOL  
Cpd  
TEST CONDITIONS  
VCC=5  
MIN  
TYP MAX UNIT  
80  
pF  
UNISONIC TECHNOLOGIES CO., LTD  
3 of 4  
QW-R502-195.A  
www.unisonic.com.tw  
U74ACT14  
CMOS IC  
„
TEST CIRCUIT AND WAVEFORMS  
Note: CL includes probe and jig capacitance.  
Fig-1 Load circuitry for switching times.  
Fig-2 Propagation delay from input(A) to output(Y).  
UTC assumes no responsibility for equipment failures that result from using products at values that  
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or  
other parameters) listed in products specifications of any and all UTC products described or contained  
herein. UTC products are not designed for use in life support appliances, devices or systems where  
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in  
whole or in part is prohibited without the prior written consent of the copyright owner. The information  
presented in this document does not form part of any quotation or contract, is believed to be accurate  
and reliable and may be changed without notice.  
UNISONIC TECHNOLOGIES CO., LTD  
4 of 4  
QW-R502-195.A  
www.unisonic.com.tw  

相关型号:

U74ACT14-D14-T

HEX SCHMITT-TRIGGER INVERTERS
UTC

U74ACT14-P14-T

HEX SCHMITT-TRIGGER INVERTERS
UTC

U74ACT14-S14-R

HEX SCHMITT-TRIGGER INVERTERS
UTC

U74ACT14-S14-T

HEX SCHMITT-TRIGGER INVERTERS
UTC

U74ACT14G-D14-T

HEX SCHMITT-TRIGGER INVERTERS
UTC

U74ACT14G-P14-R

HEX SCHMITT-TRIGGER INVERTERS
UTC

U74ACT14G-S14-R

HEX SCHMITT-TRIGGER INVERTERS
UTC

U74ACT14L-D14-T

HEX SCHMITT-TRIGGER INVERTERS
UTC

U74ACT14L-P14-T

HEX SCHMITT-TRIGGER INVERTERS
UTC

U74ACT14L-S14-R

HEX SCHMITT-TRIGGER INVERTERS
UTC

U74ACT14L-S14-T

HEX SCHMITT-TRIGGER INVERTERS
UTC

U74ACT14_15

HEX SCHMITT-TRIGGER INVERTERS
UTC