U74CBT3257CG-P16-R [UTC]

4-BIT 1-OF-2 FET MULTIPLEXER / DEMULTIPLEXER;
U74CBT3257CG-P16-R
型号: U74CBT3257CG-P16-R
厂家: Unisonic Technologies    Unisonic Technologies
描述:

4-BIT 1-OF-2 FET MULTIPLEXER / DEMULTIPLEXER

文件: 总5页 (文件大小:224K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
UNISONIC TECHNOLOGIES CO., LTD  
U74CBT3257C  
CMOS IC  
4-BIT 1-OF-2 FET  
MULTIPLEXER/  
DEMULTIPLEXER  
DESCRIPTION  
The UTC U74CBT3257C is a 4-BIT 1-OF-2 FET multiplexer/  
demultiplexer with Low ON-State Resistance (RON  
)
and  
TTL-compatibility.  
FEATURES  
Undershoot Protection for Off-Isolation on A and B Ports Up to -2V  
VCC Operating Range From 4V to 5.5V  
*
*
*
*
*
*
*
Bidirectional Data Flow, With Near-Zero Propagation Delay  
Low ON-State Resistance (RON) Characteristics (RON =3Typ.)  
Low Power Consumption ICC =3μA (Max)  
Data and Control Inputs Provide Undershoot Clamp Diodes  
Data I/Os Support 0 to 5-V Signaling Levels  
(0.8V, 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5V)  
Control Inputs Can be Driven by TTL or 5V/3.3V CMOS Outputs  
*
I
* OFF Supports Partial-Power-Down Mode Operation  
Supports I2C Bus Expansion  
*
ORDERING INFORMATION  
Ordering Number  
Package  
SSOP-16  
TSSOP-16  
Packing  
Tape Reel  
Tape Reel  
U74CBT3257CG-R16-R  
U74CBT3257CG-P16-R  
MARKING  
SSOP-16  
TSSOP-16  
www.unisonic.com.tw  
1 of 5  
Copyright © 2015 Unisonic Technologies Co., Ltd  
QW-R502-359.C  
U74CBT3257C  
CMOS IC  
PIN CONFIGURATION  
FUNCTION TABLE  
INPUT  
INPUT/OUTPUT  
A
FUNCTION  
S2  
L
OE  
L
B1  
B2  
Z
A port=B1 port  
A port=B2 port  
Disconnect  
L
H
X
H
LOGIC DIAGRAM  
1A  
2A  
SW  
SW  
1B1  
1B2  
2B1  
2B2  
SW  
SW  
3A  
4A  
3B1  
3B2  
SW  
SW  
SW  
SW  
4B1  
4B2  
S
OE  
UNISONIC TECHNOLOGIES CO., LTD  
2 of 5  
QW-R502-359.C  
www.unisonic.com.tw  
U74CBT3257C  
CMOS IC  
ABSOLUTE MAXIMUM RATING (TA=25°C, unless otherwise specified)  
PARAMETER  
SYMBOL  
VCC  
RATINGS  
-0.5 ~ 7  
UNIT  
V
Supply Voltage  
DC Input Voltage (Note 2, 3)  
VIN  
-0.5 ~ 7  
V
VIN(SW)  
VOUT(SW)  
IIK  
DC Switch Voltage (Note 2, 3)  
-0.5 ~7  
V
Control Input Clamp Current  
DC VCC or GND Current  
-50  
mA  
mA  
ICC  
±100  
IIN(SW)  
IOUT(SW)  
TOPR  
ON-State Switch Current  
±128  
mA  
Operating Temperature  
Storage Temperature  
-40~+85  
°C  
°C  
TSTG  
-65~+150  
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.  
Absolute maximum ratings are stress ratings only and functional device operation is not implied.  
2. All voltages are with respect to ground  
3. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are  
observed.  
THERMAL DATA  
PARAMETER  
SYMBOL  
RATINGS  
90  
UNIT  
°C/W  
SSOP-16  
Junction to Ambient  
θJA  
TSSOP-16  
110  
RECOMMENDED OPERATING CONDITIONS  
PARAMETER  
Supply Voltage  
SYMBOL  
VCC  
MIN  
4
TYP  
MAX  
5.5  
5.5  
0.8  
5.5  
5.5  
85  
UNIT  
V
V
V
V
High-Level Control Input Voltage  
Low-Level Control Input Voltage  
Data Input Voltage  
VIH  
2
VIL  
0
VIN  
0
Data Output Voltage  
VOUT  
TA  
0
Operating Temperature  
-40  
°C  
ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified)  
PARAMETER  
SYMBOL  
VIK  
TEST CONDITIONS  
VCC =4.5V, IIN = -18mA  
CC =5V, 0mA >IIN -50mA  
MIN TYP MAX UNIT  
Control Input Clamp Voltage  
Data Inputs Clamp Voltage  
Input Leakage Current  
-1.8  
V
V
VIKU  
II(LEAK)  
IOZ  
-2  
V
GND, Switch OFF  
VCC =5.5V, VIN =VCC or GND  
±1  
µA  
V
V
CC=5.5V, VOUT=0 to 5.5V, VIN=0  
IN =VCC or GND, Switch OFF  
Output OFF-State Current  
Power OFF Leakage Current  
Quiescent Supply Current  
±10 µA  
IOFF  
ICC  
VCC=0, VO=0 to 5.5V, VIN=0  
CC=5.5 V, IIN /IOUT =0  
VIN=VCC or GND, Switch ON or OFF  
CC=5.5V, One input at 3.4V,  
10  
3
µA  
µA  
V
V
Additional Quiescent Supply Current  
ICC  
CIN  
2.5 mA  
Other inputs at VCC or GND  
VIN=3V or 0 VCC=5V  
Control Input Capacitance  
A Port Input Capacitance  
B Port Input Capacitance  
Port Input Capacitance  
3.5  
8.5  
5.5  
16.5  
8
pF  
pF  
pF  
pF  
VIN/VOUT=3V or 0, VCC=5V  
VIN=VCC or GND, Switch OFF  
CIO(OFF)  
CIO(ON)  
VI/O=3V or 0, VIN=VCC or 0, Switch ON  
VCC=4V, VIN=2.4V,IOUT =-15mA  
12  
6
IOUT =64mA  
VCC =4.5V, VIN =0  
3
ON-Resistance  
RON  
IOUT =30mA  
3
6
VCC =4.5V, VIN =2.4V IOUT =-15mA  
5
10  
UNISONIC TECHNOLOGIES CO., LTD  
3 of 5  
QW-R502-359.C  
www.unisonic.com.tw  
U74CBT3257C  
CMOS IC  
SWITCHING CHARACTERISTICS CL=50PF (see TEST CIRCUIT AND WAVEFORMS)  
PARAMETER  
SYMBOL  
tPD  
TEST CONDITIONS  
VCC=4V, CL=50pF, RL=500Ω  
VCC= 5V±0.5V, CL=50pF, RL=500Ω  
VCC=4V, CL=50pF, RL=500Ω  
MIN TYP MAX UNIT  
0.24 ns  
From input (A or B) to output  
(B or A) (Note)  
0.15 ns  
6.0  
5.6  
6.3  
ns  
ns  
ns  
From input S to output A  
tPD(S)  
VCC= 5V±0.5V, CL=50pF, RL=500Ω  
1.5  
1.5  
1.5  
1.5  
1.5  
VCC=4V, CL=50pF, RL=500Ω  
From input S to output B  
VCC= 5V±0.5V, CL=50pF, RL=500Ω  
VCC=4V, CL=50pF, RL=500Ω  
5.8 ns  
tEN  
6.3  
5.8  
6.5  
6.0  
5.9  
5.9  
ns  
ns  
ns  
ns  
ns  
ns  
From input OE to output (A or B)  
From input S to output B  
VCC= 5V±0.5V, CL=50pF, RL=500Ω  
VCC=4V, CL=50pF, RL=500Ω  
VCC= 5V±0.5V, CL=50pF, RL=500Ω  
VCC=4V, CL=50pF, RL=500Ω  
tDIS  
From input OE to output (A or B)  
VCC= 5V±0.5V, CL=50pF, RL=500Ω  
Note: The propagation delay is the calculated RC time constant of the typical ON-state resistance of the switch and  
the specified load capacitance, when driven by an ideal voltage source (zero output impedance).  
UNISONIC TECHNOLOGIES CO., LTD  
4 of 5  
QW-R502-359.C  
www.unisonic.com.tw  
U74CBT3257C  
CMOS IC  
TEST CIRCUIT AND WAVEFORMS  
TEST  
VCC  
4V  
VI  
tR / tF  
Vꢀ  
S
CL  
RL  
VCC or GND  
2.5ns  
2.5ns  
2.5ns  
2.5ns  
2.5ns  
2.5ns  
Open  
Open  
VEXT  
50pF  
50pF  
50pF  
50pF  
50pF  
50pF  
500Ω  
500Ω  
500Ω  
500Ω  
500Ω  
500Ω  
tPLH/tPHL  
5V±0.5V  
4V  
V
CC or GND  
GND  
0.3V  
0.3V  
0.3V  
0.3V  
tPLZ/tPZL  
tPHZ/tPZH  
5V±0.5V  
4V  
GND  
VEXT  
VCC  
Open  
Open  
5V±0.5V  
VCC  
Propagation Delay Times  
Notes: 1. CL includes probe and jig capacitance.  
Enable and Disable Times  
2. All input pulses are supplied by generators having the following characteristics: PRR10MHz,  
ZO=50, tR2.5ns, tF2.5 ns.  
3. The outputs are measured one at a time with one transition per measurement.  
4. tPLZ and tPHZ are the same as tDIS  
5. tPZL and tPZH are the same as tEN  
6. tPLH and tPHL are the same as tPD(S)  
7. All parameters and waveforms are not applicable to all devices.  
.
.
.
UTC assumes no responsibility for equipment failures that result from using products at values that  
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or  
other parameters) listed in products specifications of any and all UTC products described or contained  
herein. UTC products are not designed for use in life support appliances, devices or systems where  
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in  
whole or in part is prohibited without the prior written consent of the copyright owner. The information  
presented in this document does not form part of any quotation or contract, is believed to be accurate  
and reliable and may be changed without notice.  
UNISONIC TECHNOLOGIES CO., LTD  
5 of 5  
QW-R502-359.C  
www.unisonic.com.tw  

相关型号:

U74CBT3257CG-R16-R

4-BIT 1-OF-2 FET MULTIPLEXER / DEMULTIPLEXER
UTC

U74CBT3257C_15

4-BIT 1-OF-2 FET MULTIPLEXER / DEMULTIPLEXER
UTC

U74CBT3257G-P16-R

4-BIT 1-OF-2 FET MULTIPLEXER/ DEMULTIPLEXER
UTC

U74CBT3257G-P16-T

4-BIT 1-OF-2 FET MULTIPLEXER/ DEMULTIPLEXER
UTC

U74CBT3257G-R16-R

4-BIT 1-OF-2 FET MULTIPLEXER/ DEMULTIPLEXER
UTC

U74CBT3257G-R16-T

4-BIT 1-OF-2 FET MULTIPLEXER/ DEMULTIPLEXER
UTC

U74CBT3257L-P16-R

4-BIT 1-OF-2 FET MULTIPLEXER/ DEMULTIPLEXER
UTC

U74CBT3257L-P16-T

4-BIT 1-OF-2 FET MULTIPLEXER/ DEMULTIPLEXER
UTC

U74CBT3257L-R16-R

4-BIT 1-OF-2 FET MULTIPLEXER/ DEMULTIPLEXER
UTC

U74CBT3257L-R16-T

4-BIT 1-OF-2 FET MULTIPLEXER/ DEMULTIPLEXER
UTC

U74CBT3257_15

4-BIT 1-OF-2 FET MULTIPLEXER / DEMULTIPLEXER
UTC

U74CBT3306

DUAL FET BUS SWITCH
UTC