U74HC240_15 [UTC]

OCTAL BUFFERS;
U74HC240_15
型号: U74HC240_15
厂家: Unisonic Technologies    Unisonic Technologies
描述:

OCTAL BUFFERS

文件: 总6页 (文件大小:242K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
UNISONIC TECHNOLOGIES CO., LTD  
U74HC240  
CMOS IC  
OCTAL BUFFERS AND LINE  
DRIVERS WITH 3-STATE OUTPUTS  
DESCRIPTION  
The U74HC240 is a octal buffer and line driver with 3-state  
outputs. It is organized as two 4-bit buffers/drivers with separate  
output-enable ( OE ) inputs. When OE is high, the Y outputs are in  
a high-impedance state and the outputs neither load nor drive the  
bus lines. When OE is low, the device passes inverted data from  
the A inputs to the Y outputs.  
TSSOP-20  
The U74HC240 is designed to improve the performance and  
density of 3-state memory address drivers, clock drivers and  
bus-oriented receivers and transmitters.  
To ensure the high-impedance state during power up or power  
down, OE should be tied to VCC through a pull-up resistor; and the  
minimum value of the resistor is determined by the current-sinking  
capability of the driver.  
FEATURES  
* Wide supply voltage range from 2V to 6V  
* Max tpd of 9 ns from A to Y at 6V  
* Low power consumption, ICC = 8 μA (Max.) at 6V  
* ±6 mA output driver at 5V  
* Low Input Current of 1 μA Max  
ORDERING INFORMATION  
Ordering Number  
Package  
Packing  
Tape Reel  
U74HC240G-P20-R  
TSSOP-20  
MARKING  
www.unisonic.com.tw  
1 of 6  
Copyright © 2015 Unisonic Technologies Co., Ltd  
QW-R502-498.B  
U74HC240  
CMOS IC  
PIN CONFIGURATION  
VCC  
19 2OE  
1
2
20  
1OE  
1A1  
2Y4  
18  
17  
16  
15  
14  
13  
12  
11  
3
1Y1  
2A4  
1Y2  
4
1A2  
2Y3  
5
2A3  
1Y3  
2A2  
1Y4  
2A1  
6
1A3  
2Y2  
7
8
1A4  
2Y1  
9
10  
GND  
FUNCTION TABLE (each buffer)  
INPUTS  
OUTPUT  
Y
OE  
A
L
L
H
L
L
H
Z
H
X
LOGIC DIAGRAM (positive logic)  
1
19  
11  
1OE  
2OE  
2A1  
18  
16  
14  
12  
9
2
4
6
8
1A1  
1A2  
1A3  
1A4  
1Y1  
1Y2  
1Y3  
1Y4  
2Y1  
7
13  
15  
17  
2A2  
2A3  
2A4  
2Y2  
5
2Y3  
3
2Y4  
UNISONIC TECHNOLOGIES CO., LTD  
2 of 6  
QW-R502-498.B  
www.unisonic.com.tw  
U74HC240  
CMOS IC  
ABSOLUTE MAXIMUM RATING (unless otherwise specified)  
PARAMETER  
SYMBOL  
VCC  
RATINGS  
-0.5 ~ 7  
±20  
UNIT  
V
Supply Voltage  
Input Clamp Current (VIN<0, or VIN>VCC  
)
IIK  
mA  
mA  
mA  
mA  
°C  
Output Clamp Current (VOUT<0, or VOUT>VCC  
)
IOK  
±20  
Output Current  
IOUT  
ICC  
±35  
VCC or GND Current  
±70  
Storage Temperature  
TSTG  
-65 ~ +150  
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.  
Absolute maximum ratings are stress ratings only and functional device operation is not implied.  
2. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.  
RECOMMENDED OPERATING COMDITIONS  
PARAMETER  
Supply Voltage  
SYMBOL  
VCC  
CONDITIONS  
MIN TYP MAX UNIT  
2
5
6
V
VCC = 2V  
1.5  
3.15  
4.2  
High-Level Input Voltage  
Low-Level Input Voltage  
VIH  
VIL  
V
VCC = 4.5V  
VCC = 6V  
VCC = 2V  
VCC = 4.5V  
VCC = 6V  
0.5  
1.35  
1.8  
V
Input Voltage  
VIN  
0
0
VCC  
VCC  
1000  
500  
400  
85  
V
V
Output Voltage  
VOUT  
VCC = 2V  
VCC = 4.5V  
VCC = 6V  
Input Transition Rise or Fall Rate  
Operating Temperature  
t/v  
ns/V  
°C  
TA  
-40  
ELECTRICAL CHARACTERISTICS (TA =25°C , unless otherwise specified)  
PARAMETER  
SYMBOL  
VOH  
TEST CONDITIONS  
VCC = 2V, IOH = -20 μA  
MIN TYP(1) MAX UNIT  
1.9 1.998  
VCC = 4.5V, IOH = -20 μA  
VCC = 6V, IOH = -20 Μa  
VCC = 4.5V, IOH = -6 mA  
4.4 4.499  
High-Level Output Voltage  
Low-Level Output Voltage  
V
V
5.9 5.999  
3.98  
5.48  
4.3  
VCC = 6V, IOH = -7.8 mA  
5.8  
VCC = 2V, IOL = 20 μA  
VCC = 4.5V, IOL = 20 μA  
VCC = 6V, IOL = 20 μA  
VCC = 4.5V, IOL = 6 mA  
VCC = 6V, IOL = 7.8 mA  
0.002 0.1  
0.001 0.1  
0.001 0.1  
0.17 0.26  
0.15 0.26  
VOL  
Input Leakage Current  
(A or OE inputs)  
II(LEAK)  
IOZ  
VCC = 6V, VIN = VCC or GND  
±0.1 ±100  
±0.01 ±0.5  
8
μA  
μA  
V
V
V
CC = 6V, VO = VCC or GND  
I(OE) = VIL or VIH  
High-impedance state Current  
CC = 6V, VIN = VCC or GND  
Quiescent Supply Current  
Input Capacitance  
ICC  
μA  
I
OUT = 0  
CIN  
VCC = 2V to 6V, VIN = VCC or GND  
3
10  
pF  
UNISONIC TECHNOLOGIES CO., LTD  
3 of 6  
QW-R502-498.B  
www.unisonic.com.tw  
U74HC240  
CMOS IC  
SWITCHING CHARACTERISTICS (TA =25°C)  
PARAMETER  
SYMBOL  
TEST CONDITIONS  
VCC=2V  
MIN TYP MAX UNIT  
50  
10  
9
100  
20  
CL=50pF,  
ns  
ns  
ns  
ns  
ns  
ns  
ns  
VCC=4.5V  
CC=6V  
RL=1kΩ  
Propagation delay from input A to  
output Y, tpd  
V
17  
tPLH / tPHL  
VCC=2V  
75  
15  
13  
75  
15  
13  
100  
20  
17  
44  
22  
21  
28  
8
150  
30  
CL=150pF,  
RL=1kΩ  
VCC=4.5V  
VCC=6V  
26  
VCC=2V  
150  
30  
CL=50pF,  
RL=1kΩ  
VCC=4.5V  
Output enable time from input OE to  
output Y, ten  
VCC=6V  
26  
tPZH / tPZL  
tPHZ / tPLZ  
tr / tf  
VCC=2V  
200  
40  
CL=150pF,  
RL=1kΩ  
VCC=4.5V  
VCC=6V  
34  
VCC=2V  
150  
30  
Output disable time from input OE to  
output Y, tdis  
CL=50pF,  
RL=1kΩ  
VCC=4.5V  
VCC=6V  
26  
VCC=2V  
60  
CL=50pF,  
RL=1kΩ  
VCC=4.5V  
12  
VCC=6V  
6
10  
Propagation of rise or fall, tt  
VCC=2V  
45  
17  
13  
210  
42  
CL=150pF,  
RL=1kΩ  
VCC=4.5V  
VCC=6V  
36  
OPERATING CHARACTERISTICS (TA =25°C)  
PARAMETER  
SYMBOL  
Cpd  
TEST CONDITIONS  
No load  
MIN TYP MAX UNIT  
Power dissipation capacitance per  
buffer/driver  
35  
pF  
UNISONIC TECHNOLOGIES CO., LTD  
4 of 6  
QW-R502-498.B  
www.unisonic.com.tw  
U74HC240  
CMOS IC  
TEST CIRCUIT AND WAVEFORMS  
TEST  
tPLH/tPHL  
tPLZ/tPZL  
tPHZ/tPZH  
S1  
Open  
VLOAD  
GND  
Inputs  
VM  
VLOAD  
VCC  
CL  
RL  
VIN  
tr, tf  
VCC  
6ns  
VCC/2  
50 or 150pF  
500Ω  
VCC  
0V  
90%  
90%  
Input  
10%  
10%  
t
t
r
f
VIN  
Input  
VM  
VM  
0V  
tPHL  
tPLH  
VOH  
90%  
90%  
Output  
VM  
VM  
10%  
10%  
VOL  
t
t
r
f
tPHL  
tPLH  
VOH  
90%  
90%  
VM  
Output  
VM  
10%  
10%  
VOL  
t
t
r
f
UNISONIC TECHNOLOGIES CO., LTD  
5 of 6  
QW-R502-498.B  
www.unisonic.com.tw  
U74HC240  
CMOS IC  
TEST CIRCUIT AND WAVEFORMS (Cont.)  
VIN  
0V  
Input  
VM  
VM  
tPLZ  
tPZL  
VLOAD  
Output  
VM  
10 %  
90 %  
S1 at VLOAD  
VOL  
tPHZ  
tPZH  
VOH  
0V  
Output  
VM  
S1 at GND  
Notes: 1. CL includes probe and jig capacitance.  
2. All input pulses are supplied by generators having the following characteristics: PRR 1MHz, ZO = 50.  
UTC assumes no responsibility for equipment failures that result from using products at values that  
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or  
other parameters) listed in products specifications of any and all UTC products described or contained  
herein. UTC products are not designed for use in life support appliances, devices or systems where  
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in  
whole or in part is prohibited without the prior written consent of the copyright owner. The information  
presented in this document does not form part of any quotation or contract, is believed to be accurate  
and reliable and may be changed without notice.  
UNISONIC TECHNOLOGIES CO., LTD  
6 of 6  
QW-R502-498.B  
www.unisonic.com.tw  

相关型号:

U74HC240_17

OCTAL BUFFERS AND LINE DRIVERS
UTC

U74HC244

OCTAL BUFFER AND LINE DRIVER WITH 3-STATE OUTPUT
UTC

U74HC244G-D20-T

OCTAL BUFFER AND LINE DRIVER WITH 3-STATE OUTPUT
UTC

U74HC244G-P20-R

OCTAL BUFFER AND LINE DRIVER WITH 3-STATE OUTPUT
UTC

U74HC244G-P20-T

OCTAL BUFFER AND LINE DRIVER WITH 3-STATE OUTPUT
UTC

U74HC244G-S20-R

OCTAL BUFFER AND LINE DRIVER WITH 3-STATE OUTPUT
UTC

U74HC244G-S20-T

OCTAL BUFFER AND LINE DRIVER WITH 3-STATE OUTPUT
UTC

U74HC244L-D20-T

OCTAL BUFFER AND LINE DRIVER WITH 3-STATE OUTPUT
UTC

U74HC244L-P20-R

OCTAL BUFFER AND LINE DRIVER WITH 3-STATE OUTPUT
UTC

U74HC244L-P20-T

OCTAL BUFFER AND LINE DRIVER WITH 3-STATE OUTPUT
UTC

U74HC244L-S20-R

OCTAL BUFFER AND LINE DRIVER WITH 3-STATE OUTPUT
UTC

U74HC244L-S20-T

OCTAL BUFFER AND LINE DRIVER WITH 3-STATE OUTPUT
UTC