U74HC595A [UTC]
8-BIT SERIAL-IN SHIFT REGISTER WITH LATCHED 3-STATE PARALLEL OUTPUTS, PROVIDING SERIAL OUTPUT; 带有锁存3态并行输出8位串行移位寄存器,提供串行输出型号: | U74HC595A |
厂家: | Unisonic Technologies |
描述: | 8-BIT SERIAL-IN SHIFT REGISTER WITH LATCHED 3-STATE PARALLEL OUTPUTS, PROVIDING SERIAL OUTPUT |
文件: | 总6页 (文件大小:184K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UNISONIC TECHNOLOGIES CO., LTD
U74HC595A
CMOS IC
8-BIT SERIAL-IN SHIFT
REGISTER WITH LATCHED
3-STATE PARALLEL OUTPUTS,
PROVIDING SERIAL OUTPUT
DESCRIPTION
The UTC 74HC595A contains an 8-bit register with
asynchronous reset input and an 8-bit latch with output. The Serial
Data Input (A) will shift into the internal shift register during every
LOW-to-HIGH transition on the Shift Clock. The latch will latch the
8-bit data from the shift register during the LOW-to-HIGH transition
on the Latch Clock. The shift register also provides a serial output.
FEATURES
* Operation Voltage Range:2~6V
* High Noise Immunity
* Output Compatibility with CMOS and TTL
* Specified from -40~+125°C
* Halogen Free
ORDERING INFORMATION
Ordering Number
Package
SOP-16
Packing
U74HC595AG-S16-R
Tape Reel
www.unisonic.com.tw
Copyright © 2009 Unisonic Technologies Co., Ltd
1 of 6
QW-R502-354.A
U74HC595A
CMOS IC
PIN CONFIGURATION
FUNCTION TABLE
INPUT
OUTPUT
LR
Operation
Reset
Serial Shift Latch Output
input A clock clock enable
SR
SQH
L
QA to QH
NC
Reset shift register
Shift data into shift
register
L
X
X
L,H, È
L
L
NC
NC
DÆ SRA
SRNÆSRN+1
H
D
Ç
L,H, È
L
SRGÆSRH
NC
Shift register remains
unchanged
H
H
X
X
L,H, È L,H, È
L
L
NC
NC
NC
NC
NC
Transfer shift register
contents to latch
register
L,H, È
Ç
NC
SRNÆLRN
SRN
Latch register remains
unchanged
X
X
X
X
X
X
X
X
X
L,H, È
L
L
*
*
*
NC
**
*
*
*
NC
Enabled
Z
Enable parallel outputs
Force outputs into high
impedance state
X
X
H
**
shift register contents
data(L,H) logic level
latch register contents
low-to-high
unchanged
high-to-low
SR:
D:
LR:
Ç:
NC:
È:
depends on Reset and Shift Clock inputs
depends on Latch Clock inputs
*:
**:
UNISONIC TECHNOLOGIES CO., LTD
2 of 6
QW-R502-354.A
www.unisonic.com.tw
U74HC595A
CMOS IC
LOGIC DIAGRAM
UNISONIC TECHNOLOGIES CO., LTD
3 of 6
QW-R502-354.A
www.unisonic.com.tw
U74HC595A
CMOS IC
ABSOLUTE MAXIMUM RATING (unless otherwise specified)(Note 2)
PARAMETER
SYMBOL
VCC
VIN
RATINGS
-0.5~7.0
-0.5~Vcc+0.5
-0.5~VCC+0.5
±20
UNIT
V
Supply Voltage
Input Voltage
V
Output Voltage(active mode)
VOUT
IIK
V
Input Clamp Current (VIN <0)
Output Clamp Current (VOUT <0)
Output Current
mA
mA
mA
mA
mW
mW
°C
IOK
±20
IOUT
ICC
±35
VCC or GND Current
±75
Power Dissipation
Derate above 65°C~125°C
Storage Temperature
500
PD
7
TSTG
-65 ~ +150
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. The input and output voltage ratings may be exceeded if the input and output current ratings are
observed.
RECOMMENDED OPERATING COMDITIONS
PARAMETER
SYMBOL
MIN
2
TYP
MAX
6
UNIT
V
Supply Voltage
Input Voltage
Output Voltage
VCC
VIN
0
VCC
VCC
125
1000
500
400
V
VOUT
TOPR
0
V
Operating Temperature
-40
°C
ns
ns
ns
VCC =2V
VCC =4.5V
VCC =6V
Δt
Input Transition Rise or Fall Rate
ΔV
ELECTRICAL CHARACTERISTICS
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX UNIT
VCC=2V
VCC=3V
1.5
2.1
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
HIGH-level input voltage
LOW-lever output voltage
VIH
VCC=4.5V
CC=6V
3.15
4.2
V
VCC=2V
VCC=3V
VCC=4.5V
0.5
0.9
VIL
1.35
1.8
VCC=6V
VCC=2V, IOH=-20μA
VCC=4.5V, IOH=-20μA
VCC=6V, IOH=-20μA
VCC=3V, IOH=-2.4mA
VCC=4.5V, IOH=-6mA
1.9
4.4
High-Level Output Voltage,
QA-QH
5.9
VOH
2.48
3.98
5.48
VCC=6V, IOH=-7.8mA
VCC=2V, IOL=20μA
VCC=4.5V, IOL=20μA
VCC=6V, IOL=20μA
VCC=3V, IOL=2.4mA
VCC=4.5V, IOL=6mA
VCC=6V, IOL=7.8mA
VCC=2V, IOH=-20μA
VCC=4.5V, IOH=-20μA
VCC=6V, IOH=-20μA
VCC=3V, IOH=-2.4mA
VCC=4.5V, IOH=-4mA
VCC=6V, IOH=-5.2mA
0.1
0.1
0.1
Low-Level Output Voltage,
QA-QH
VOL
0.26
0.26
0.26
1.9
4.4
High-Level Output Voltage,
SQH
5.9
VOH
2.48
3.98
5.48
UNISONIC TECHNOLOGIES CO., LTD
4 of 6
QW-R502-354.A
www.unisonic.com.tw
U74HC595A
CMOS IC
ELECTRICAL CHARACTERISTICS(Cont.)
PARAMETER
SYMBOL
TEST CONDITIONS
VCC=2V, IOL=20μA
MIN TYP MAX UNIT
0.1
0.1
V
V
V
V
V
V
VCC=4.5V, IOL=20μA
Low-Level Output Voltage,
SQH
VCC=6V, IOL=20μA
0.1
VOL
VCC=3V, IOL=2.4mA
0.26
0.26
0.26
VCC=4.5V, IOL=4mA
VCC=6V, IOL=5.2mA
Input Leakage Current
Output OFF -state current
Quiescent Supply Current
Input Capacitance
II(LEAK)
IOZ
VCC=6V, VIN=VCC or GND
VCC=6V, VOUT=VCC or GND
VCC=6V, VIN=VCC or GND, IOUT=0
VCC=6V, VIN=VCC or GND
±0.1 μA
±0.5 μA
IQ
4
μA
CIN
10
pF
DYNAMIC CHARACTERISTICS
PARAMETER
SYMBOL
TEST CONDITIONS
VCC=2V
MIN TYP MAX UNIT
MHz
6
VCC=3V
15 MHz
30 MHz
35 MHz
Maximum clock pulse frequency
fmax
VCC=4.5V
VCC=6V
VCC=2V
140
100
28
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
ns
Propagation delay from input
(Latch Clock) to output(Qn)
VCC=3V
t
PHL/tPLH
VCC=4.5V
VCC=6V
24
VCC=2V
VCC=3V
VCC=4.5V
135
90
Propagation delay from input
(Output Enable) to output(Qn)
t
t
PZL/tPZH
27
VCC=6V
23
VCC=2V
VCC=3V
VCC=4.5V
150
100
30
Propagation delay from input
(Output Enable) to output(Qn)
PLZ/tPHZ
VCC=6V
26
VCC=2V
VCC=3V
VCC=4.5V
75
27
Output transition time, SQH
tTLH/ tTHL
15
VCC=6V
13
VCC=2V
VCC=3V
VCC=4.5V
145
100
29
Propagation delay from input
(Reset) to output(SQH)
tPHL
VCC=6V
25
VCC=2V
VCC=3V
VCC=4.5V
140
100
28
Propagation delay from input
(Shift Clock) to output(SQH)
t
PLH/tPHL
VCC=6V
24
VCC=2V
VCC=3V
VCC=4.5V
60
23
Output transition time, Qn
tTLH/ tTHL
12
VCC=6V
10
OPERATING CHARACTERISTICS
PARAMETER
Power Dissipation Capacitance
SYMBOL
Cpd
TEST CONDITIONS
MIN TYP MAX UNIT
No load
300
pF
UNISONIC TECHNOLOGIES CO., LTD
5 of 6
QW-R502-354.A
www.unisonic.com.tw
U74HC595A
CMOS IC
TEST CIRCUIT AND WAVEFORMS
VCC
K1
From Output
RL
CL
K2
(Note 2)
Note 2: CL includes probe and jig capacitance. CL=50pF, RL=1KΩ
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
6 of 6
QW-R502-354.A
www.unisonic.com.tw
相关型号:
©2020 ICPDF网 联系我们和版权申明