U74LVC2G66L-P08-R [UTC]
DUAL BILATERAL ANALOG SWITCH; 双边双模拟开关型号: | U74LVC2G66L-P08-R |
厂家: | Unisonic Technologies |
描述: | DUAL BILATERAL ANALOG SWITCH |
文件: | 总10页 (文件大小:243K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UNISONIC TECHNOLOGIES CO., LTD
U74LVC2G66
CMOS IC
DUAL BILATERAL ANALOG
SWITCH
DESCRIPTION
The U74LVC2G66 is a dual bilateral analog switch which
is designed for 1.65V to 5.5V operation. This switch can handle
both analog and digital signals and permits signals with
amplitudes of up to 5.5 V (peak) to be transmitted in either
direction. Each switch section has enable-input control (C). If
the voltage applied to C is at high-level, the associated switch
section is turned on.
TSSOP-8
FEATURES
* Wide Supply Voltage Range from 1.65V to 5.5V
* Up to 5.5V Inputs Accept Voltages
* Max tPD of 0.8 ns at 3.3V
* High ON-OFF Output Voltage Ratio
* High Degree Of Linearity
* High Speed, Typically 0.5 ns at VCC = 3 V, CL = 50 pF
* Rail-to-Rail Input/Output
* Low On-State Resistance, Typically 6 Ω at VCC = 4.5 V
ORDERING INFORMATION
Ordering Number
Package
Packing
Lead Free
Halogen Free
U74LVC2G66L-P08-R
U74LVC2G66L-P08-T
U74LVC2G66G-P08-R
U74LVC2G66G-P08-T
TSSOP-8
TSSOP-8
Tape Reel
Tube
U74LVC2G66L-P08-R
(1) R: Tape Reel, T: Tube
(2) P08: TSSOP-8
(1) Packing Type
(2) Package Type
(3) Lead Free
(3) G: Halogen Free, L: Lead Free
www.unisonic.com.tw
1 of 10
Copyright © 2011 Unisonic Technologies Co., Ltd
QW-R502-432.B
U74LVC2G66
CMOS IC
PIN CONFIGURATION
FUNCTION TABLE (Each Gate)
CONTROL INPUT (Y)
SWITCH
Off
L
H
On
LOGIC DIAGRAM (Positive Logic)
1
2
1A
1B
7
1C
One of two switches
UNISONIC TECHNOLOGIES CO., LTD
2 of 10
QW-R502-432.B
www.unisonic.com.tw
U74LVC2G66
CMOS IC
ABSOLUTE MAXIMUM RATING (Unless otherwise specified)
PARAMETER
SYMBOL
VCC
RATINGS
-0.5~6.5
-0.5~6.5
-0.5~VCC+0.5
-50
UNIT
V
Supply Voltage
Input Voltage
VIN
V
Switch I/O Voltage
VOUT
IIK
V
Control Input Clamp Current
I/O Port Diode Current
On-State Switch Current
VCC or GND Current
Storage Temperature
mA
mA
mA
mA
°C
II/OK
-50
IOUT
ICC
±50
±100
TSTG
-65 ~ +150
Note: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
THERMAL DATA
PARAMETER
SYMBOL
RATINGS
190
UNIT
°C /W
θJA
Junction to Ambient
RECOMMENDED OPERATING CONDITIONS
PARAMETER
Supply Voltage
SYMBOL
VCC
CONDITIONS
Operating
MIN
TYP
MAX
5.5
UNIT
1.65
0
V
V
I/O Port Voltage
VI/O
VCC
V
CC = 1.65V to 1.95V
0.65*VCC
0.7*VCC
0.7*VCC
0.7*VCC
VCC = 2.3V to 2.7V
VCC = 3V to 3.6V
VCC = 4.5V to 5.5V
High-Level Input Voltage,
Control Input
VIH
V
V
CC = 1.65V to 1.95V
0.35*VCC
0.3*VCC
0.3*VCC
0.3*VCC
5.5
VCC = 2.3V to 2.7V
VCC = 3V to 3.6V
VCC = 4.5V to 5.5V
Low-Level Input Voltage,
Control Input
VIL
VIN
V
V
Control Input Voltage
0
VCC = 1.65V to 1.95V
20
VCC = 2.3V to 2.7V
VCC = 3V to 3.6V
VCC = 4.5V to 5.5V
20
Input Transition Rise or Fall Rate
tR / tF
ns/V
°C
10
10
Operating Temperature
TOPR
-40
85
ELECTRICAL CHARACTERISTICS (TA =25°C , unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
IS = 4mA, VCC = 1.65 V
MIN
TYP
12.5
9
MAX UNIT
30
VIN =VCC or GND,
VC = VIH,
(see Fig.1)
IS = 8mA, VCC = 2.3 V
IS = 24mA, VCC = 3 V
IS = 32mA, VCC = 4.5 V
IS = 4mA, VCC = 1.65 V
IS = 8mA, VCC = 2.3 V
IS = 24mA, VCC = 3 V
IS = 32mA, VCC = 4.5 V
IS = 4mA, VCC = 1.65 V
IS = 8mA, VCC = 2.3 V
IS = 24mA, VCC = 3 V
IS = 32mA, VCC = 4.5 V
20
Ω
On-State Switch Resistance
Peak On-State Resistance
rON
7.5
6
15
10
85
120
VIN =VCC to GND,
22
30
Ω
rON(P) VC = VIH,
(see Fig.1)
12
20
7.5
15
7
VIN =VCC to GND,
5
Difference of On-State
Resistance Between Switches
ΔrON
VC = VIH,
(see Fig.1)
Ω
3
2
UNISONIC TECHNOLOGIES CO., LTD
3 of 10
QW-R502-432.B
www.unisonic.com.tw
U74LVC2G66
CMOS IC
ELECTRICAL CHARACTERISTICS (Cont.)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
TYP
MAX UNIT
VIN = VCC and VOUT = GND or
VIN = GND and VOUT = VCC
VC = VIL, VCC = 5.5V
(see Figure 2)
,
Off-State Switch Leakage Current
On-State Switch Leakage Current
IS(OFF)
±0.1
μA
VIN = VCC or GND, VC = VIH,
OUT = Open, VCC = 5.5V
IS(On)
V
±0.1
μA
(see Figure 3)
Control Input Current
IIN
IQ
VC = VCC or GND, VCC = 5.5V
VC = VCC or GND, VCC = 5.5V
One input at VCC – 0.6V; VCC= 5.5V;
other inputs at VCC or GND
VCC = 5.0V
±0.1
1
μA
μA
Quiescent Supply Current
Additional Quiescent Supply
Current
Δ IQ
500
μA
Control Input Capacitance
Switch Input/Output Capacitance
Switch Input/Output Capacitance
CIN
3.5
6
pF
pF
pF
CIO(OFF)
CIO(ON)
VCC = 5.0V
VCC = 5.0V
14
SWITCHING CHARACTERISTICS (TA =25°C)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
TYP
MAX UNIT
2
V
CC=1.8±0.15V, RL=1Kꢀ
CL=30pF
VCC=2.5±0.2V, RL=500ꢀ
VCC=3.3±0.3V, RL=500ꢀ
VCC=5.0±0.5V, RL=500ꢀ
VCC=1.8±0.15V, RL=1Kꢀ
VCC=2.5±0.2V, RL=500ꢀ
VCC=3.3±0.3V, RL=500ꢀ
VCC=5.0±0.5V, RL=500ꢀ
1.2
ns
Propagation Delay From Input
(A or B) to Output (B or A)
tPLH / tPHL
(tPD
)
0.8
CL=50pF
CL=30pF
CL=50pF
CL=30pF
CL=50pF
0.6
10
2.3
1.6
1.5
1.3
2.5
1.2
2
5.6
ns
Propagation Delay From Input
(C) to Output (A or B)
tPZL / tPZH
(tEN
)
4.4
3.9
V
CC=1.8±0.15V, RL=1Kꢀ
10.5
VCC=2.5±0.2V, RL=500ꢀ
VCC=3.3±0.3V, RL=500ꢀ
VCC=5.0±0.5V, RL=500ꢀ
6.9
ns
Propagation Delay From Input
(C) to Output (A or B)
t
PLZ / tPHZ (tDIS)
7.2
1.1
6.3
ANALOG SWITCHING CHARACTERISTICS (TA =25°C) (Note)
PARAMETER SYMBOL TEST CONDITIONS
MIN
TYP
35
MAX UNIT
V
CC = 1.65 V
CL = 50 pF, RL = 600 ꢀ,
VCC = 2.3 V
VCC = 3 V
VCC = 4.5 V
120
175
195
>300
>300
>300
>300
-58
f
IN = sine wave
(see Fig.4)
Frequency Response (Switch On)
From Input (A or B) to Output
(B or A)
ns
V
CC = 1.65 V
CL = 5 pF, RL = 50 ꢀ,
VCC = 2.3 V
VCC = 3 V
f
IN = sine wave
(see Fig.4)
VCC = 4.5 V
VCC = 1.65 V
VCC = 2.3 V
VCC = 3 V
CL = 50 pF, RL = 600 ꢀ,
-58
fIN = 1 MHz (sine wave)
-58
Crosstalk (Note)
(see Fig.6)
VCC = 4.5 V
-58
(Between Switches)
From Input (A or B) to Output
(B or A)
dB
VCC = 1.65 V
-42
CL = 5 pF, RL = 50 ꢀ,
VCC = 2.3 V
VCC = 3 V
-42
fIN = 1 MHz (sine wave)
-42
(see Fig.6)
VCC = 4.5 V
-42
UNISONIC TECHNOLOGIES CO., LTD
4 of 10
QW-R502-432.B
www.unisonic.com.tw
U74LVC2G66
CMOS IC
ANALOG SWITCHING CHARACTERISTICS (Cont.)
PARAMETER
SYMBOL
TEST CONDITIONS
VCC = 1.65 V
MIN
TYP
35
MAX UNIT
mV
Crosstalk
CL = 50 pF, RL = 600 ꢀ,
VCC = 2.3 V
VCC = 3 V
50
(Control Input To Signal Output)
From Input (C) to Output (B or A)
fIN =1MHz (sine wave)
(see Fig.7)
70
VCC = 4.5 V
100
-58
V
CC = 1.65 V
CL = 50 pF, RL = 600 ꢀ,
IN =1MHz (sine wave)
(see Fig.8)
VCC = 2.3 V
VCC = 3 V
-58
f
-58
Feedthrough Attenuation
(Switch Off)
From Input (A or B) to Output (B or A)
VCC = 4.5 V
-58
dB
V
CC = 1.65 V
-42
CL = 5 pF, RL = 50 ꢀ,
IN = 1MHz (sine wave)
(see Fig.8)
VCC = 2.3 V
VCC = 3 V
-42
f
-42
VCC = 4.5 V
-42
V
CC = 1.65 V
0.1
CL = 50 pF, RL = 10 kꢀ,
VCC = 2.3 V
VCC = 3 V
0.025
0.015
0.01
0.15
0.025
0.015
0.01
f
IN = 1kHz (sine wave)
(see Fig.9)
VCC = 4.5 V
Sine-Wave Distortion
From Input (A or B) to Output (B or A)
%
VCC = 1.65 V
CL = 50 pF, RL = 10 kꢀ,
VCC = 2.3 V
VCC = 3 V
fIN = 10kHz (sine wave)
(see Fig.9)
VCC = 4.5 V
Note: Adjust fIN voltage to obtain 0dBm at input.
OPERATING CHARACTERISTICS (TA =25°C)
PARAMETER
SYMBOL
TEST CONDITIONS
CC = 1.8V
MIN
TYP
8
MAX UNIT
pF
V
VCC = 2.5V
VCC = 3.3V
VCC = 5V
9
Power Dissipation Capacitance
CPD
f=10MHz
9.5
11
UNISONIC TECHNOLOGIES CO., LTD
5 of 10
QW-R502-432.B
www.unisonic.com.tw
U74LVC2G66
CMOS IC
PARAMETER MEASUREMENT
VCC
VCC
VO
A or B
B or A
VI = VCC
IS
C
VC
A
VIH
One of two switches
On-state
GND
R
V
VI - VO
V − VO
IS
I
rON
=
Ω
Fig.1 On-state resistance test circuit
VCC
VCC
VO
A or B
B or A
VI
A
C
VIL
VC
One of two switches
Off-state
GN
D
Condition 1: VI = GND, VO = VCC
Condition 2: VI = VCC, VO = GND
Fig.2 Off-state switch leakage-current test circuit
UNISONIC TECHNOLOGIES CO., LTD
6 of 10
QW-R502-432.B
www.unisonic.com.tw
U74LVC2G66
CMOS IC
PARAMETER MEASUREMENT (Cont.)
Fig.3 On-state leakage-current test circuit
VCC
VCC
0.1μF
VO
CL
A or B
B or A
RL
C
VIH
VC
VCC/2
One of two switches
On-state
fIN
50ꢀ
GND
RL/CL : 600ꢀ / 50 pF
RL/CL : 50ꢀ / 5 pF
Fig.4 Frequency response (switch on)
UNISONIC TECHNOLOGIES CO., LTD
7 of 10
QW-R502-432.B
www.unisonic.com.tw
U74LVC2G66
CMOS IC
PARAMETER MEASUREMENT (Cont.)
V
LOAD
Open
GND
S1
R
L
From output
TEST
S1
tPLH / tPHL
tPLZ / tPZL
tPHZ / tPZH
Open
VLOAD
GND
C
R
L
L
TEST CIRCUIT
Inputs
VCC
VM
VLOAD
CL
RL
VΔ
VIN
tR, tF
≤2ns
≤2ns
1.8V±0.15V
2.5V±0.2V
3.3V±0.3V
5V±0.5V
VCC
VCC
VCC
VCC
VCC/2
VCC/2
VCC/2
VCC/2
2*VCC
2*VCC
2*VCC
2*VCC
30pF
30pF
50pF
50pF
1Kꢀ
500ꢀ
500ꢀ
500ꢀ
0.15V
0.15V
0.3V
≤2.5ns
≤2.5ns
0.3V
Notes: 1. CL includes probe and jig capacitance.
2. All input pulses are supplied by generators having the following characteristics: PRR ≤10MHz, ZO = 50ꢀ.
Fig.5 Load circuit and voltage waveforms
UNISONIC TECHNOLOGIES CO., LTD
8 of 10
QW-R502-432.B
www.unisonic.com.tw
U74LVC2G66
CMOS IC
PARAMETER MEASUREMENT (Cont.)
20 log10(VO2/VI1) or 20 log10(VO1/VI2)
Fig.6 Crosstalk (between switches)
Fig.7 Crosstalk (control input, switch output)
UNISONIC TECHNOLOGIES CO., LTD
9 of 10
QW-R502-432.B
www.unisonic.com.tw
U74LVC2G66
CMOS IC
PARAMETER MEASUREMENT (Cont.)
RL/CL : 600ꢀ / 50 pF
RL/CL : 50ꢀ / 5 pF
Fig.8 Feedthrough (switch off)
VCC=1.65V, VI = 1.4 VP-P
VCC=2.3V, VI = 2 VP-P
VCC=3V, VI = 2.5 VP-P
VCC=4.5V, VI = 4 VP-P
Fig.9 Sine-wave distortion
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
10 of 10
QW-R502-432.B
www.unisonic.com.tw
相关型号:
U74LVC2G86
This device has power-down protective circuit, preventing device destruction when it is powered down.
UTC
U74LVC2G86G-S08-R
This device has power-down protective circuit, preventing device destruction when it is powered down.
UTC
U74LVC2G86G-S08-T
This device has power-down protective circuit, preventing device destruction when it is powered down.
UTC
U74LVC2G86L-S08-R
This device has power-down protective circuit, preventing device destruction when it is powered down.
UTC
U74LVC2G86L-S08-T
This device has power-down protective circuit, preventing device destruction when it is powered down.
UTC
©2020 ICPDF网 联系我们和版权申明