首页 |元器件品牌

UM603AL-P08-R [UTC]

DUAL OPERATIONAL AMPLIFIER AND CURRENT CONTROLLER; 双路运算放大器和电流控制器
UM603AL-P08-R
型号： UM603AL-P08-R
厂家： Unisonic Technologies    Unisonic Technologies
描述：

DUAL OPERATIONAL AMPLIFIER AND CURRENT CONTROLLER
双路运算放大器和电流控制器

模拟IC 信号电路 运算放大器 光电二极管 控制器
文件： 总6页 (文件大小：197K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
UNISONIC TECHNOLOGIES CO., LTD  
UM603/A  
LINEAR INTEGRATED CIRCUIT  
DUAL OPERATIONAL  
AMPLIFIER AND CURRENT  
CONTROLLER  
„
DESCRIPTION  
The UTC UM603/A is a monolithic IC that includes one  
independent op-amp and another op-amp for witch the non  
inverting input is wired to a 2.5V fixed voltage reference. This  
device is offering space and cost saving in many applications like  
power supply management or data acquisition systems  
„
FEATURES  
Lead-free:  
UM603L/UM603AL  
OPERATIONAL AMPLIFIER  
Halogen-free:UM603G/UM603AG  
*Low input offset voltage: 0.5mV typ. for UTC UM603A  
*Low supply current: 350uA/op.(@ VCC= 5 V)  
*Medium bandwidth(unity gain): 0.9MHz  
*Large output voltage swing: 0 V ~ (VCC-1.5 V)  
*Input common mode voltage range includes ground  
*Wide power supply range: 3V ~ 32V ±1.5 ~ ±16V  
VOLTAGE REFERENCE  
*Fixed output voltage reference 2.5V  
*±0.4% and ±1% voltage precision  
*Sink current capability : 1 ~ 100mA  
*Typical output impedance : 0.2Ω  
„ ORDERING INFORMATION  
Ordering Number  
Package  
Packing  
Normal  
Lead Free  
Halogen Free  
UM603G-P08-R  
UM603G-S08-R  
UM603AG-P08-R  
UM603AG-S08-R  
UM603-P08-R  
UM603-S08-R  
UM603A-P08-R  
UM603A-S08-R  
UM603L-P08-R  
UM603L-S08-R  
UM603AL-P08-R  
UM603AL-S08-R  
TSSOP-8  
SOP-8  
Tape Reel  
Tape Reel  
Tape Reel  
Tape Reel  
TSSOP-8  
SOP-8  
UM603L-P08-R  
(1)Packing Type  
(2)Package Type  
(3)Lead Plating  
(1) R: Tape Reel  
(2) P08: TSSOP-8, S08: SOP-8  
(3) G: Halogen Free, L: Lead Free, Blank: Pb/Sn  
www.unisonic.com.tw  
Copyright © 2009 Unisonic Technologies Co., Ltd  
1 of 6  
QW-R105-031.D  
UM603/A  
LINEAR INTEGRATED CIRCUIT  
„
PIN CONFIGURATION  
„
PIN DESCRIPTION  
PIN NO  
PIN NAME  
Output 1  
Inverting Input1  
I/O  
O
I
PIN DESCRIPTION  
1
2
3
4
5
6
7
8
OP1 output  
OP1 inverting input  
Non-Inverting Input1  
O
A 2.5V fixed voltage reference output, wired to OP1 non-inverting input  
VCC  
-
Non-Inverting Input2  
Inverting Input2  
Output 2  
I
I
OP2 non-inverting input  
OP2 inverting input  
OP2 output  
O
VCC+  
UNISONIC TECHNOLOGIES CO., LTD  
2 of 6  
www.unisonic.com.tw  
QW-R105-031.D  
UM603/A  
LINEAR INTEGRATED CIRCUIT  
„
ABSOLUTE MAXIMUM RATINGS  
PARAMETER  
SYMBOL  
VCC  
RATING  
36  
UNIT  
V
Supply Voltage  
Differential Input Voltage  
Input Voltage  
VI(DIFF)  
VIN  
36  
V
-0.3 ~ +36  
+125  
V
Junction Temperature  
Operating Temperature  
TJ  
°C  
°C  
TOPR  
-55 ~ +125  
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.  
Absolute maximum ratings are stress ratings only and functional device operation is not implied.  
„
THERMAL DATA  
PARAMETER  
Thermal Resistance Junction to Ambient  
SYMBOL  
RATING  
175  
UNIT  
SOP-8  
θJA  
°C/W  
TSSOP-8  
120  
„ ELECTRICAL CHARACTERISTICS  
PARAMETER  
SYMBOL  
ICC  
TEST CONDITIONS  
MIN TYP. MAX UNIT  
Total Supply Current, excluding  
Current in the Voltage Reference  
VCC+=5V, no load, TMIN≤Ta≤TMAX  
VCC+=30V, no load, TMIN≤Ta≤TMAX  
0.7  
1.2  
2
mA  
VCC+=+5V, VCC=Ground, Ta=25°C (unless otherwise specified)  
PARAMETER  
SYMBOL  
TEST CONDITIONS  
MIN  
TYP MAX UNIT  
OPERATOR1 (op-amp with non-inverting input connected to the internal VREF  
)
VI(CM)=0V  
UM603A  
UM603  
Ta=25°C  
MIN≤Ta≤TMAX  
0.5  
1
2
3
mV  
mV  
T
Input Offset Voltage  
VI(OFF)  
VI(CM)=0V  
Ta=25°C  
4
5
T
MIN≤Ta≤TMAX  
Input Offset Voltage Drift  
Input Bias Current  
DVI(OFF)  
7
μV/°C  
nA  
II(BIAS) negative input  
20  
VI(CM)=0V  
Avd  
Large Signal Voltage Gain  
V/mV  
dB  
VCC=15V, RL=2k  
100  
100  
Vi(CM)=0V  
Supply Voltage Rejection Ratio  
SVR  
V
CC=5V ~30V  
65  
20  
VOUT=2V  
Output Current Source  
Short Circuit to Ground  
Output Current Sink  
ISOURCE  
mA  
mA  
mA  
V
V
CC=+15V, Vid=+1V  
CC =+15V  
40  
40  
ISC  
60  
Vid=-1V,  
ISINK  
VCC=+15V, VOUT=2V  
10  
20  
VCC+=30V  
High Level Output Voltage  
VOH  
Ta=25℃, RL=10k  
27  
27  
V
T
MIN≤Ta≤TMAX  
RL=10k  
MIN≤Ta≤TMAX  
VIN=0.5 ~ 3V, VCC=15V  
28  
5
20  
20  
Low Level Output Voltage  
Slew Rate at Unity Gain  
Gain Bandwidth Product  
VOL  
SR  
mV  
V/μs  
MHz  
T
0.2  
0.5  
0.4  
0.9  
RL=2k, CL=100pF, unity gain  
VCC=30V, RL=2K, CL=100pF  
f=100kHz, VIN=10mV  
f=1kHz  
GBP  
Av=20dB, RL=2k, VCC=30V  
CL=100pF, VOUT=2VPP  
Total Harmonic Distortion  
THD  
0.02  
%
UNISONIC TECHNOLOGIES CO., LTD  
3 of 6  
www.unisonic.com.tw  
QW-R105-031.D  
UM603/A  
„ ELECTRICAL CHARACTERISTICS(Cont.)  
LINEAR INTEGRATED CIRCUIT  
VCC+=+5V, VCC=Ground, VOUT=1.4V, Ta=25°C (unless otherwise specified)  
PARAMETER SYMBOL TEST CONDITIONS  
MIN  
TYP MAX UNIT  
OPERATOR2 (independent op-amp)(Note 1)  
Ta=25°C  
MIN≤Ta≤TMAX  
Ta=25°C  
0.5  
1
2
3
4
5
UM603A  
mV  
T
Input Offset Voltage  
VI(OFF)  
UM603  
mV  
μV/°C  
nA  
T
MIN≤Ta≤TMAX  
Input Offset Voltage Drift  
Input Offset Current  
DVI(OFF)  
II(OFF)  
7
2
30  
50  
T
T
MIN≤Ta≤TMAX  
MIN≤Ta≤TMAX  
20  
150  
200  
Input Bias Current  
II(BIAS)  
nA  
VCC=15V, RL=2k, VOUT=1.4V~11.4V  
TMIN≤Ta≤TMAX  
50  
25  
65  
0
100  
100  
Large Signal Voltage Gain  
Avd  
V/mV  
dB  
V
V
CC=5V ~30V  
Supply Voltage Rejection Ratio  
SVRR  
(VCC+)-1.5  
(VCC+)-2  
CC=+30V (Note 1)  
Input Common Mode Voltage Range  
VI(CM)  
V
TMIN≤Ta≤TMAX  
0
70  
60  
20  
85  
Common Mode Rejection Ratio  
CMRR  
dB  
T
MIN≤Ta≤TMAX  
VCC=+15V, VOUT=2V, Vjd=+1V  
V
Output Current Source  
Short Circuit to Ground  
Output Current Sink  
IO(SOURCE)  
40  
40  
20  
mA  
mA  
mA  
CC=+15V  
ISC  
60  
Vid=-1V, VCC=+15V, VOUT=2V  
IO(SINK)  
10  
VCC+=30V  
High Level Output Voltage  
VOH  
Ta=25℃, RL=10k  
27  
27  
28  
V
T
MIN≤Ta≤TMAX  
RL=10k  
MIN≤Ta≤TMAX  
20  
20  
Low Level Output Voltage  
Slew Rate at Unity Gain  
Gain Bandwidth Product  
VOL  
SR  
5
mV  
V/μs  
MHz  
T
VIN=0.5 ~ 3V, VCC=15V  
RL=2k, CL=100pF, unity gain  
VCC=30V, RL=2K, CL=100pF  
f=100kHz, VIN=10mV  
f=1kHz  
0.2  
0.5  
0.4  
0.9  
GBP  
Total Harmonic Distortion  
THD Av=20dB, RL=2k, Vcc=30V,  
CL=100pF, VOUT=2Vpp  
0.02  
%
„
VOLTAGE REFERENCE  
PARAMETER  
SYMBOL  
Ik  
Value  
1 ~ 100  
UNIT  
mA  
Cathode Current  
PARAMETER  
SYMBOL  
VREF  
TEST CONDITIONS  
±0.4%, Ta=25°C  
MIN  
2.49  
TYP MAX UNIT  
2.5  
2.51  
2.52  
UM603A  
UM603  
V
T
MIN≤Ta≤TMAX, VKA=VREF, IKA=10mA 2.48  
±1%, Ta=25°C 2.475  
MIN≤Ta≤TMAX, VKA=VREF, IKA=10mA 2.45  
VKA=VREF; Ik=10mA  
Reference Input Voltage  
2.5  
2.525  
2.55  
T
Reference Input Voltage Deviation  
Over Temperature Range  
Minimum Cathode Current for  
Regulation  
△VREF  
mV  
T
MIN≤Ta≤TMAX  
7
30  
1
IMIN  
VKA=VREF  
0.5  
mA  
Dynamic Impedance(Note 2)  
∣ZKA∣ VKA=VREF, △Ik=1~100mA, f<1kHz  
0.2  
0.5  
Ω
Note: 1. The input common-mode voltage of either input signal voltage should not be allowed to go negative by more  
than 0.3V. The upper end of the common-mode voltage range is VCC+ -1.5V. But either of both inputs can  
goto +36V without damage.  
2. The dynamic impedance is defined as「ZKA」=△kA/△Ik  
UNISONIC TECHNOLOGIES CO., LTD  
4 of 6  
www.unisonic.com.tw  
QW-R105-031.D  
UM603/A  
LINEAR INTEGRATED CIRCUIT  
„
TYPICAL CHARACTERISTICS  
Unit Frequency=F(I)  
GBP=F(I)  
Vcc=+/-15V, RL=2K, CL=100PF  
Vcc=+/-15V, RL=2K, CL=100PF  
1000  
800  
700  
600  
800  
600  
500  
400  
400  
300  
200  
200  
0
100  
0
-0.01 -0.005  
-0.01 -0.005  
Source<= I(A) =>Sink  
0.01 0.015  
0.01 0.015  
0
0.005  
0
0.005  
Source<= I(A) =>Sink  
Phase and Gain Margin=F(I)  
Total Harmonic Distorsion THD=F(freq)  
Vcc=+/-15V, RL=2K, CL=100PF  
0.014  
0.013  
0.012  
0.011  
60  
50  
0
Phase Margin(deg)  
-2  
-4  
-6  
40  
30  
Gain Margin(dB)  
0.01  
0.009  
-8  
20  
0.008  
0.007  
-10  
-12  
10  
0
0.006  
0.005  
-14  
0.015  
1000  
100  
-0.01 -0.005  
0
0.005  
0.01  
10  
10000  
Frequency (Hz)  
Source<= I(A) =>Sink  
Vio Distribution-Operator 1  
Vcc+=5V,Vcc-=0V  
Total Harmonic Distorsion THD=F(freq)  
70  
60  
70  
60  
50  
40  
30  
20  
50  
40  
30  
20  
10  
0
10  
0
3
1
100  
-3 -2.5 -2 -1.5 -1 -0.5  
0
0.5 1 1.5 2 2.5  
0.01  
0.1  
10  
Frequency (Hz)  
Input Offset Voltage, VI(OFF)(mV)  
UNISONIC TECHNOLOGIES CO., LTD  
5 of 6  
www.unisonic.com.tw  
QW-R105-031.D  
UM603/A  
LINEAR INTEGRATED CIRCUIT  
„
TYPICAL CHARACTERISTICS(Cont.)  
VI(OFF) Distribution-Operator 2  
Vcc+=5V,Vcc-=0V  
VREF =F(IK)  
70  
60  
3
2.5  
50  
40  
30  
20  
2
1.5  
1
10  
0
0.5  
0.02  
Cathode Current Ik(A)  
0.2  
3
-3 -2.5 -2 -1.5 -1 -0.5 0 0.5  
I(OFF)(mV)  
1
1.5  
2
2.5  
0.0002  
0.002  
V
VREF Stability=f(I,C)  
0.06  
0.05  
Stable  
0.04  
0.03  
0.02  
Unstable  
0.01  
0
1E-9  
1E-8  
1E-7  
1E-6  
1E-5  
1E-10  
Capacitor (F)  
UTC assumes no responsibility for equipment failures that result from using products at values that  
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or  
other parameters) listed in products specifications of any and all UTC products described or contained  
herein. UTC products are not designed for use in life support appliances, devices or systems where  
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in  
whole or in part is prohibited without the prior written consent of the copyright owner. The information  
presented in this document does not form part of any quotation or contract, is believed to be accurate  
and reliable and may be changed without notice.  
UNISONIC TECHNOLOGIES CO., LTD  
6 of 6  
QW-R105-031.D  
www.unisonic.com.tw  

相关型号：

UM603AL-S08-R

 DUAL OPERATIONAL AMPLIFIER AND CURRENT CONTROLLER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
UTC

UM603A_17

 DUAL OPERATIONAL AMPLIFIER AND CURRENT CONTROLLER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
UTC

UM603G-P08-R

 DUAL OPERATIONAL AMPLIFIER AND CURRENT CONTROLLER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
UTC

UM603G-S08-R

 DUAL OPERATIONAL AMPLIFIER AND CURRENT CONTROLLER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
UTC

UM603L

 Operational Amplifier, 2 Func, 5000uV Offset-Max, BIPolar, PDSO8

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
UTC

UM603L-P08-R

 DUAL OPERATIONAL AMPLIFIER AND CURRENT CONTROLLER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
UTC

UM603L-S08-R

 DUAL OPERATIONAL AMPLIFIER AND CURRENT CONTROLLER

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
UTC

UM603S

 OPERATIONAL AMPLIFIERS WITH 2.5V SHUNT REGULATOR

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
UTC

UM603S-AF5-R

 OPERATIONAL AMPLIFIERS WITH 2.5V SHUNT REGULATOR

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
UTC

UM603SL-AF5-R

 OPERATIONAL AMPLIFIERS WITH 2.5V SHUNT REGULATOR

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
UTC

UM604

 QUAD OPERATIONAL AMPLIFIER AND PROGRAMMABLE VOLTAGE REFERENCE

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
UTC

UM604(16DIP)

 Power Management Circuit, PDIP16

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
UTC
©2020 ICPDF网 联系我们和版权申明