UR1170HL-S08-R [UTC]

800MA LDO REGULATOR;
UR1170HL-S08-R
型号: UR1170HL-S08-R
厂家: Unisonic Technologies    Unisonic Technologies
描述:

800MA LDO REGULATOR

文件: 总6页 (文件大小:178K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
UNISONIC TECHNOLOGIES CO., LTD  
UR1170  
Preliminary  
CMOS IC  
800MA LDO REGULATOR  
DESCRIPTION  
The UTC UR1170 is a typical LDO (linear regulator) with the  
features of high output voltage accuracy, low supply current, low  
ON-resistance, and high ripple rejection.  
During operation of the UTC UR1170, the dropout voltage is  
very low and the response of line transient and load transient are  
very well.  
Internally, there’re many functions of UTC UR1170 which can  
be seen in the block figure. There are a voltage reference unit, an  
error amplifier, resistor-net for voltage setting, a current limit circuit,  
and a chip enable circuit in each UTC UR1170.  
The UTC UR1170 can be used as an ideal of the power supply  
for hand-held communication equipment, such as: power source for  
portable communication equipment, power source for electrical  
appliances, for example, cameras, VCRs and camcorders and  
power source for battery-powered equipment.  
FEATURES  
* Low standby current  
* Ultra-Low supply current  
* Output voltage (stepwise setting with a step of 0.1V in the range  
of 1.2V~4.0V)  
* Output current (MIN=800mA@VIN=VOUT+1.0V)  
* Low dropout voltage  
* Line regulation  
* High output voltage accuracy  
* Low temperature-drift coefficient of output voltage  
* Built-in thermal shunt circuit  
* Built-in current limit circuit  
ORDERING INFORMATION  
Ordering Number  
Lead Free  
Package  
Packing  
Halogen Free  
UR1170xL-S08-T  
UR1170xL-S08-R  
UR1170xG-S08-T  
UR1170xG-S08-R  
SOP-8  
SOP-8  
Tube  
Tape Reel  
UR1170xL-S08-R  
(1) T: Tube, R: Tape Reel  
(1)Packing Type  
(2)Package Type  
(2) S08: SOP-8  
(3)Lead Free  
(3) L: Lead Free, G: Halogen Free  
(4) L: Low, H: High  
(4)Enable Threshold Level  
www.unisonic.com.tw  
Copyright © 2013 Unisonic Technologies Co., Ltd  
1 of 6  
QW-R502-A31.a  
UR1170  
Preliminary  
CMOS IC  
PIN CONFIGURATION  
PIN DESCRIPTION  
PIN NO.  
PIN NAME  
VOUT  
DESCRIPTION  
1, 2  
3
Voltage Regulator Output Pin  
CE or CE  
GND  
Chip Enable Pin Voltage Regulator Output Pin  
4
Ground Pin  
Input Pin  
5, 6  
7, 8  
VDD  
NC  
No Connection  
BLOCK DIAGRAM  
VDD  
6
1
2
VOUT  
VDD  
5
VOUT  
-
+
Vref  
Current Limit  
and OTP  
3
4
GND  
CE  
UNISONIC TECHNOLOGIES CO., LTD  
2 of 6  
QW-R502-A31.a  
www.unisonic.com.tw  
UR1170  
Preliminary  
CMOS IC  
ABSOLUTE MAXIMUM RATING  
PARAMETER  
SYMBOL  
VIN  
RATINGS  
7.0  
UNIT  
Input Voltage  
V
V
V
A
Input Voltage(CE or CE Input Pin)  
Output Voltage  
VCE  
-0.3~VIN+0.3  
-0.3~VIN+0.3  
1.2  
VOUT  
IOUT  
Output Current  
Power Dissipation  
PD  
Internally limited  
-40~85  
Operating Temperature  
Storage Temperature  
TOPT  
TSTG  
°C  
°C  
-55~125  
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.  
Absolute maximum ratings are stress ratings only and functional device operation is not implied.  
ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified)  
UR1170L  
PARAMETER  
SYMBOL  
VIN  
TEST CONDITIONS  
MIN  
TYP  
MAX UNIT  
Input Voltage  
6.0  
160  
V
µA  
µA  
V
Supply Current1  
Standby Current  
Output Voltage  
Output Current  
Load Regulation  
ISS1  
VIN-VOUT=1.0V, VCE=GND  
VIN=VCE=6.0V  
80  
ISTB  
0.1  
1.0  
VOUT  
IOUT1  
VIN-VOUT=1.0V, IOUT=100mA  
VIN-VOUT=1.0V  
x0.98  
800  
x1.02  
mA  
mV  
V
VOUT/IOUT VIN-VOUT=1.0V, 1mAIOUT300mA  
30  
100  
0.45  
0.35  
0.30  
0.25  
0.20  
0.18  
0.30  
VOUT=1.5  
VOUT=1.6  
VOUT=1.7  
0.35  
0.30  
0.25  
0.20  
0.15  
0.12  
0.05  
50  
V
V
Dropout Voltage  
VDIF  
IOUT=300mA  
VOUT=1.8VOUT2.0  
VOUT=2.1VOUT2.4  
VOUT=2.5VOUT4.0  
V
V
V
Line Regulation  
VOUT/VIN IOUT=100mA, VOUT+0.5VVIN8.0V  
%/V  
dB  
ppm  
/°C  
mA  
MΩ  
V
Ripple Rejection  
RR  
f=1kHz,Ripple 0.5VP-P,VIN-VOUT=1.0V  
IOUT=10mA, -40°C TA 85°C  
VOUT=0V  
Output Voltage  
Temperature Coefficient  
Short Current Limit  
VOUT/T  
±100  
ILIM  
RPU  
40  
Pull-up resistance for CE pin  
CE Input Voltage “H”  
CE Input Voltage “L”  
Thermal Shutdown Detector  
Threshold Temperature  
Thermal Shutdown Released  
Temperature  
1.25  
1.50  
2.50  
5.00  
0.25  
VCEH  
VCEL  
V
TTSD  
TTSR  
Junction Temperature  
Junction Temperature  
150  
120  
°C  
°C  
UNISONIC TECHNOLOGIES CO., LTD  
3 of 6  
QW-R502-A31.a  
www.unisonic.com.tw  
UR1170  
Preliminary  
CMOS IC  
ELECTRICAL CHARACTERISTICS(Cont.)  
UR1170H  
PARAMETER  
SYMBOL  
VIN  
TEST CONDITIONS  
MIN  
TYP  
MAX UNIT  
Input Voltage  
6.0  
160  
V
µA  
µA  
V
Supply Current  
Standby Current  
Output Voltage  
Output Current  
Load Regulation  
ISS  
VIN-VOUT=1.0V, VCE=VIN  
VIN=6.0V, VCE=GND  
VIN-VOUT=1.0V, IOUT=100mA  
VIN-VOUT=1.0V  
80  
ISTB  
0.1  
1.0  
VOUT  
IOUT  
x0.98  
800  
x1.02  
mA  
mV  
V
VOUT/IOUT VIN-VOUT=1.0V, 1mAIOUT300mA  
OUT=1.5  
30  
100  
0.45  
0.35  
0.30  
0.25  
0.20  
0.18  
0.30  
V
0.35  
0.30  
0.25  
0.20  
0.15  
0.12  
0.05  
50  
VOUT=1.6  
V
VOUT=1.7  
V
Dropout Voltage  
VDIF  
IOUT=300mA  
VOUT=1.8VOUT2.0  
VOUT=2.1VOUT2.4  
VOUT=2.5VOUT4.0  
V
V
V
Line Regulation  
VOUT/VIN IOUT=100mA, VOUT+0.5VVIN8.0V  
%/V  
dB  
ppm  
/°C  
mA  
Ripple Rejection  
RR  
VOUT/T  
ILIM  
f=1kHz,Ripple 0.5Vp-p  
-40°CTOPT85°C  
VOUT=0V  
Output Voltage  
±100  
40  
Temperature Coefficient  
Short Current Limit  
Pull-down resistance for CE  
pin  
RPD  
1.25  
1.5  
2.5  
5
MΩ  
CE Input Voltage “H”  
CE Input Voltage “L”  
Thermal Shutdown Detector  
Threshold Temperature  
Thermal Shutdown Released  
Temperature  
VCEH  
VCEL  
V
V
0.25  
TTSD  
TTSR  
Junction Temperature  
Junction Temperature  
150  
120  
°C  
°C  
UNISONIC TECHNOLOGIES CO., LTD  
4 of 6  
QW-R502-A31.a  
www.unisonic.com.tw  
UR1170  
Preliminary  
CMOS IC  
TEST CIRCUIT  
UNISONIC TECHNOLOGIES CO., LTD  
5 of 6  
QW-R502-A31.a  
www.unisonic.com.tw  
UR1170  
Preliminary  
CMOS IC  
TYPICAL APPLICATION CIRCUIT  
UTC assumes no responsibility for equipment failures that result from using products at values that  
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or  
other parameters) listed in products specifications of any and all UTC products described or contained  
herein. UTC products are not designed for use in life support appliances, devices or systems where  
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in  
whole or in part is prohibited without the prior written consent of the copyright owner. The information  
presented in this document does not form part of any quotation or contract, is believed to be accurate  
and reliable and may be changed without notice.  
UNISONIC TECHNOLOGIES CO., LTD  
6 of 6  
QW-R502-A31.a  
www.unisonic.com.tw  

相关型号:

UR1170LG-S08-T

800MA LDO REGULATOR
UTC

UR1170LL-S08-T

800MA LDO REGULATOR
UTC

UR1171

1.5A LDO REGULATOR
UTC

UR1171AHG-S08-R

1.5A LDO REGULATOR
UTC

UR1171AHG-S08-T

1.5A LDO REGULATOR
UTC

UR1171AHL-S08-R

1.5A LDO REGULATOR
UTC

UR1171AHL-S08-T

1.5A LDO REGULATOR
UTC

UR1220

2A OUTPUT TYPE LOW POWER-LOSS VOLTAGE REGULATOR
UTC

UR1220G-TN3-D-R

2A OUTPUT TYPE LOW POWER-LOSS VOLTAGE REGULATOR
UTC

UR1220G-TN3-D-T

2A OUTPUT TYPE LOW POWER-LOSS VOLTAGE REGULATOR
UTC

UR1220L-TN3-D-R

2A OUTPUT TYPE LOW POWER-LOSS VOLTAGE REGULATOR
UTC

UR1220L-TN3-D-T

2A OUTPUT TYPE LOW POWER-LOSS VOLTAGE REGULATOR
UTC