US5V330L-R16-R [UTC]
WIDEBAND/VIDEO QUAD 2-CHANNEL MUX/DEMUX WITH LOW ON-RESISTANCE;型号: | US5V330L-R16-R |
厂家: | Unisonic Technologies |
描述: | WIDEBAND/VIDEO QUAD 2-CHANNEL MUX/DEMUX WITH LOW ON-RESISTANCE |
文件: | 总6页 (文件大小:170K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UNISONIC TECHNOLOGIES CO., LTD
US5V330
Preliminary
CMOS IC
WIDEBAND/VIDEO QUAD
2-CHANNEL MUX/DEMUX
WITH LOW ON-RESISTANCE
DESCRIPTION
The UTC’s US5V330 video switch is
a 4bit 2-channel
multiplexer/demultiplexer with a single switch-enable input. Low
differential gain and phase make switch ideal for both RGB and
composite video switching applications.
Low On-Resistance and wide bandwidth make it ideal for video
and other applications. UTC’s US5V330 can replac the
U74HC4053 multiplier and buffer/ amplifier.
FEATURES
* Single supply operation: +5.0V
* Low Power Consumption (0.1µA typical)
* Wide bandwidth: 360 MHz (typical)
* Low On-Resistance: 5Ω (typical)
* Low crosstalk at 10 MHz: -48 db
* Control Inputs Can Be Driven by TTL or 5-V/3.3-V CMOS Outputs
ORDERING INFORMATION
Ordering Number
Lead Free
Package
Packing
Halogen Free
US5V330L-R16-R
US5V330L-R16-T
US5V330G-R16-R
US5V330G-R16-T
SSOP-16
SSOP-16
Tape Reel
Tube
Note: xx: Output Voltage, refer to Marking Information.
www.unisonic.com.tw
1 of 6
Copyright © 2013 Unisonic Technologies Co., Ltd
QW-R502-908.a
US5V330
Preliminary
CMOS IC
PIN CONFIGURATION
PIN DESCRIPTION
PIN NO.
1
PIN NAME
IN
S1A, S2A, S1B, S2B, S2C, S1C, S2D, S1D Analog Video I/O
DESCRIPTION
Select Input
2, 3, 5, 6, 10, 11, 13, 14
4, 7, 9, 12
DA, DB DC, DD
GND
Analog Video I/O
Ground
8
15
16
Enable
EN
VCC
Power
TRUTH TABLE
IN
0
FUNCTIONAL
EN
0
DA=S1A, DB=S1B, DC=S1C, DD=S1D
DA=S2A, DB=S2B, DC=S2C, DD=S2D
DA=Z, DB= Z, DC= Z, DD= Z
0
1
1
X
UNISONIC TECHNOLOGIES CO., LTD
2 of 6
QW-R502-908.a
www.unisonic.com.tw
US5V330
Preliminary
CMOS IC
BLOCK DIAGRAM
2
3
S1A
S2A
4
7
9
DA
DB
DC
5
6
S1B
S2B
S1C
S2C
11
10
DD 12
14
13
S1D
S2D
1
IN
Control Logic
15
EN
UNISONIC TECHNOLOGIES CO., LTD
3 of 6
QW-R502-908.a
www.unisonic.com.tw
US5V330
Preliminary
CMOS IC
ABSOLUTE MAXIMUM RATING
(Which the useful life may be impaired. For user guidelines, not tested.)
PARAMETER
Supply Voltage to Ground Potential (Inputs & VCC Only)
Supply Voltage to Ground Potential (Outputs & D/O Only)
DC Input Voltage
SYMBOL
RATINGS
-0.5~+7.0
-0.5~+7.0
-0.5~+7.0
120
UNIT
V
VDC
V
VIO
IIO
V
DC Output Current
mA
W
Power Dissipation
PD
0.5
Storage Temperature
TSTG
TA
-65~+150
-40~+85
°C
°C
Ambient Temperature with Power Applied
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
DC ELECTRICAL CHARACTERISTICS
(Over the Operating Range, TA=-40°C~+85°C, VCC=5V±5%)
TYP
(Note 2)
PARAMETER
SYMBOL
TEST CONDITIONS (Note 1)
MIN
MAX UNIT
Analog Signal Range
Input HIGH Voltage
VANALOG
VIH
VIL
0
2.0
V
V
Guaranteed Logic HIGH Level
Guaranteed Logic LOW Level
VCC=Max., VIN=VCC
2.0
-0.5
Input LOW Voltage
0.8
±1
±1
±1
V
Input HIGH Current
IIH
µA
µA
µA
V
Input LOW Current
IIL
VCC=Max., VIN=GND
Analog Output Leakage Current
Clamp Diode Voltage
Input Hysteresis at Control Pins
IO
0 ≤ S1, S2 or D ≤VCC, Switch OFF
VCC=Min., IIN=-18mA
VIK
VH
-0.7
-1.2
150
5
mV
Ω
VCC=Min., VIN=1.0V, ION=13mA
VCC=Min., VIN=2.0V, ION=26mA
7
Switch On-Resistance (Note 3)
RON
7
10
Ω
Notes:1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the
applicable device type.
2. Typical values are at VCC=5.0V, TA=25°C ambient and maximum loading.
3. Measured by the voltage drop between S1, S2, and D I/O pins at indicated current through the switch.
On-Resistance is determined by the lower of the voltages on the S1, S2, and D I/O pins.
DYNAMIC CHARACTERISTICS (Over the Operating Range, TA=-40°C~+85°C, VCC=5V±5%)
PARAMETER
SYMBOL
tON
TEST CONDITIONS
RL=75Ω, CL=20PF, See Fig. 1
RL=75Ω, CL=20PF, See Fig. 1
MIN
TYP
2.5
MAX UNIT
Turn On Time
Turn Off Time
5
5
ns
ns
tOFF
1.1
BW
-3 dB Bandwidth
Crosstalk
See Fig. 2
400 MHz
dB
(Note)
XTALK
CIN
(Note)
COFF
(Note)
CON
10MHz, See Fig. 2
VIN= 0V, f=1MHz
-48
-36
Input/Enable Capacitance
6
6
9
pF
pF
Capacitance, Switch Off
VIN=0V, f=1MHz
Capacitance, Switch On
Off Isolation
VIN= 0V, f=1MHz
pF
dB
(Note)
OIRR
10MHz, See Fig. 2
Note: This parameter is determined by device characterization but is not production tested.
UNISONIC TECHNOLOGIES CO., LTD
4 of 6
QW-R502-908.a
www.unisonic.com.tw
US5V330
Preliminary
CMOS IC
POWER CHARACTERISTICS
TYP
(Note 2)
PARAMETER
SYMBOL
ICC
TEST CONDITIONS (Note 1)
MIN
MAX UNIT
Quiescent Power Supply
Current
VCC=Max.
VCC=Max.
IN=GND or VCC
IN=3.4V (Note 3)
0.1
3.0
2.5
µA
Supply Current per Input @
TTL HIGH
∆ICC
mA
V
CC=Max., S1, S2 and D Pins Open
Supply Current per Input per
MHz (Note 4)
mA
MHz
ICCD
0.25
EN = GND Control Input Toggling 50%
Duty Cycle
Notes:1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the
applicable device.
2. Typical values are at VCC=5.0V, +25°C ambient.
3. Per TTL driven input (VIN=3.4V, control inputs only); S1, S2, and D pins do not contribute to ICC
.
4. This current applies to the control inputs only and represent the current required to switch internal
capacitance at the specified frequency. The S1, S2, and D I/O pins generate no significant AC or DC
currents as they transition. This parameter is not tested, but is guaranteed by design.
UNISONIC TECHNOLOGIES CO., LTD
5 of 6
QW-R502-908.a
www.unisonic.com.tw
US5V330
Preliminary
CMOS IC
TYPICAL APPLICATION CIRCUIT
HP8753
S1
R1
T1
HP11667A
UTC
US5V330
Figure 2. Gain/Phase, Crosstalk, Off-Isolation
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
6 of 6
QW-R502-908.a
www.unisonic.com.tw
相关型号:
©2020 ICPDF网 联系我们和版权申明