TC-350-DBG-256A-12.80
更新时间:2024-09-18 07:56:47
品牌:VECTRON
描述:Low Profile TCXOs Temperature Compensated Crystal Oscillators
TC-350-DBG-256A-12.80 概述
Low Profile TCXOs Temperature Compensated Crystal Oscillators 低调的TCXO温度补偿晶体振荡器
TC-350-DBG-256A-12.80 数据手册
通过下载TC-350-DBG-256A-12.80数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Product Data Sheet
TC-350 Series Low Profile TCXO’s
Temperature Compensated Crystal Oscillators
Features
• Frequency from 1 to 77.76 MHz
•
1.0 ppmꢀ -40°C to +85°C
• Low Profile: 3.81 mm (0.15”) Ht.
• Aging <5 ppm for Ten Years
• 3.3 Vdc or 5 Vdc operation
• TTL/HCMOS Output
Applications
• SMC Clock
• SONET/SDH Network Timing Sources
• Wireless Communications
• Satellite Communications
• Portable Test Equipment
Description
Vectron International has introduced a series of low profile
surface mount, Temperature Compensated Crystal
Oscillators (TCXO’s) available in frequencies from 1 to 77.76
MHz.
The TC-350 series surface mount TCXO can be mounted
using the standard convection reflow process. Current drain
to less than 5 mA is available upon request. Aging <5 ppm
for ten years.
For additional information about TCXO’s visit our website at:
www.tcxo.com
TC-350 Series Low Profile TCXO’s
Performance Characteristics
Parameter
Characteristics
Standard Frequencies:
10.00, 12.80, 13.00, 16.384, 19.44, 20.00, 20.48, 27.00 MHz
Available from 1.0 MHz to 77.76 MHz
Package:
22.86 x 17.78 x 3.81 mm (0.90” x 0.70” x 0.15”)
Supply Voltage (Vdd):
(Other options are available upon request)
C = 5.0 Vdc 5ꢀ
D = 3.3 Vdc 5ꢀ
Current:
Current draw will vary greatly depending on frequency and output
type. For this series TCXO typical current draw will be about 10 mA.
Please consult the factory about your exact current requirements.
Output:
Voh min.
A = HCMOS/ACMOS
0.8 Vdd
B = 10 TTL
2.4 Vdc
Voh max.
0.5 Vdc
0.5 Vdc
Rise/Fall Time:
Symmetry (Duty Cycle):
Load:
5 ns max.
10 ns max.
50ꢀ 10ꢀ
10 TTL
50ꢀ 10ꢀ
100k ohm // 10 pF
Temperature Stability:
B-507 = 5.0 x 10-7
B-106 = 1.0 x 10-6
C-507 = 5.0 x 10-7
C-106 = 1.0 x 10-6
D-757 = 7.5 x 10-7
D-156 = 1.5 x 10-6
F-106 = 1.0 x 10-6
F-206 = 2.0 x 10-6
G-156 = 1.5 x 10-6
G-256 = 2.5 x 10-6
over
over
over
over
over
over
over
over
over
over
0°C to +50°C
0°C to +50°C
0°C to +70°C
NOTE: Tighter
stabilities and
wider temperature
ranges are avail-
able, please con-
sult the factory.
0°C to +70°C
-20°C to +70°C
-20°C to +70°C
-40°C to +85°C
-40°C to +85°C
-55°C to +85°C
-55°C to +85°C
Aging (typical):
Frequency vs. Supply:
<5 ppm for ten years @ +70°C
< 0.1 ppm for a 5ꢀ change in Supply Voltage
5 ppm minimum via external voltage, 0 to Vdd
Electrical Frequency Adjust:
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com
2
TC-350 Series Low Profile TCXO’s
Outlline Drawing
2.54
( .100)
22.86
( .900)
1
2
17.78
( .700)
4
3
7.62
( .300)
2.54
( .100)
3.81
( .15)
Pin Function
I
Output
Freq. Adj.
GND
.100
.045R
2
3
4
mm
.100
(in)
Supply
4 places
Recommended Pad Layout
3.175
(.125)
SQ
7.62
(.300)
Pad Layout
for 350 Package
17.78
(.700)
12.7
(.500)
mm
(in)
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com
3
TC-350 Series Low Profile TCXO’s
Recommended Reflow Profile
pre-heating
reflow
60 to 90 sec.
at 150°C to 170°C
20 to 40 sec.
at > 200°C
Note: TCXO’s are precision subsystems with tolerances measured to 0.01 ppm. Non-
Hermetically sealed TCXO’s should not be subjected to a wash process that will immerse the
TCXO in solvents. NO CLEAN is the recommended procedure. The TC-350 series of TCXO’s has
been designed for pick and place reflow soldering. The suggested reflow profile is shown above.
The TCXO may be relfowed one time in the non-inverted state. Typical frequency shift as a result
of reflow is <1.0 ppm per reflow. VI recommends waiting at least two hours after reflow below
measuring the unit.
Output Loads
Vdd
Vdd
.01µF
PROBE
.01µF
Vdd
PROBE
RL
OUT
DUT
D1
R2
OUT
DUT
270Ω
CL
D2
C1
.01µF
R1
6k
D3
D4
(A) HCMOS / ACMOS
(B) TTL
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com
4
TC-350 Series Low Profile TCXO’s
Standard Shipping Method
The Standard ship method for volume production of the TC-350 series is in a matrix
tray. These trays are 100ꢀ recyclable. The trays also offer the added feature that they
can be continuously feed into a pick-n-place machine eliminating the down time
required with tape-n-reel.
12 15/16
0.44
0.44
0.20 Deep
VI Logo
0.25
4.00
0.15
0.95
0.25
0.15
Pin 1
this corner
0.75
3 x 13 Array / 39 units per tray
Handling Precautions
Although protection circuitry has been designed into
this device, proper precautions should be taken to avoid
exposure to electrostatic discharge (ESD) during han-
dling and mounting. VI employs a human-body model
*HBM) and a charged-device model (CDM) for ESD-sus-
ceptibility testing and protection design evaluation. ESD
voltage thresholds are depending on the circuit parame-
ters used to define the mode.
Although no industry-wide standard has been adopt-
ed for the CDM, a standard HBM (resistance =1500
ohms, capacitance - 1000 pf) is widely used and therefore
can be used for comparison purposes. The HBM ESD
threshold presented here was obtained by using these cir-
cuit parameters.
ESD Threshold Voltage
Model
Human-Body (HBM)
Charged-Device
Threshold
Unit
500
500
V min
V min
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com
5
TC-350 Series Low Profile TCXO’s
Ordering Information
-
-
-
TC
350
D
A
G
256
A - 12.80 MHz
Product Family
TC = TCXO
Output Frequency
1.0 to 77.76 MHz
Package
350 = SMT package
Supply Voltage
C = 5.0 Vdc 5ꢀ
D = 3.3 Vdc 5ꢀ
Pin 1 Options
A = Standard, No Options
(Default)
Output Type
A = HCMOS / ACMOS
B = 10 TTL
Temperature Stability
B-507 = 5.0 x 10-7 over
B-106 = 1.0 x 10-6 over
C-507 = 5.0 x 10-7 over
C-106 = 1.0 x 10-6 over
0°C to +50°C
0°C to +50°C
0°C to +70°C
Note: Other
stabilities are
available upon
request.
0°C to +70°C
D-757 = 7.5 x 10-7 over -20°C to +70°C
D-156 = 1.5 x 10-6 over -20°C to +70°C
F-106 = 1.0 x 10-6 over -40°C to +85°C
F-206 = 2.0 x 10-6 over -40°C to +85°C
G-156 = 1.5 x 10-6 over -55°C to +85°C
G-256 = 2.5 x 10-6 over -55°C to +85°C
Visit our website at www.vectron.com
For additional information please contact:
USA: Vectron International • 267 Lowell Road, Hudson, NH 03051 . . . . . Tel: 1-88-VECTRON-1 • Fax: 1-888-FAX-VECTRON
EUROPE: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: 49 (0) 3328 4784 17 Fax: 49 (0) 3328 4784 30
ASIA: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tel: +86 21 28909740 / 41 /42 Fax: +86 21 28909240 / 2890999
www.vectron.com
Vectron International reserves the right to make changes to the product(s) and/or information contained herein without notice.
No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
©2001ꢀ Vectron International.
Rev.04Jan02, 19Aug02
TC-350-DBG-256A-12.80 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
TC-36.000MBD-T | ETC | OSC MEMS 36.000MHZ CMOS SMD | 获取价格 | |
TC-36.000MBE-T | ETC | OSC MEMS 36.000MHZ CMOS SMD | 获取价格 | |
TC-36.000MCD-T | ETC | OSC MEMS 36.000MHZ CMOS SMD | 获取价格 | |
TC-36.000MCE-T | ETC | OSC MEMS 36.000MHZ CMOS SMD | 获取价格 | |
TC-36.000MDD-T | ETC | OSC MEMS 36.000MHZ CMOS SMD | 获取价格 | |
TC-36.000MDE-T | ETC | OSC MEMS 36.000MHZ CMOS SMD | 获取价格 | |
TC-37.500MBD-T | ETC | OSC MEMS 37.50MHZ CMOS SMD | 获取价格 | |
TC-37.500MBE-T | ETC | OSC MEMS 37.50MHZ CMOS SMD | 获取价格 | |
TC-37.500MCD-T | ETC | OSC MEMS 37.50MHZ CMOS SMD | 获取价格 | |
TC-37.500MCE-T | ETC | OSC MEMS 37.50MHZ CMOS SMD | 获取价格 |
TC-350-DBG-256A-12.80 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6