TFS160G [VECTRON]
Filter specification; 过滤器规格
| 型号： | TFS160G |
| 厂家： | 
Vectron International, Inc |
| 描述： | Filter specification |
| 文件： | 总5页 (文件大小：269K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Filename: tfs 160g.doc
Version 1.2
09.12.2005
VI TELEFILTER
Filter specification
TFS 160G
1/5
Measurement condition
Ambient temperature:
Input power level:
Terminating impedance: *
Input:
25
0
°C
dBm
29 Ω || -6,0 pF
78 Ω || 0 pF
Output:
Characteristics
Remark:
The nominal frequency f is fixed at 160 MHz. The insertion loss a is defined as loss value determined at f Reference level for the relative attenuation
N
e
N.
a
of the TFS 160G is the insertion loss a . The centre frequency f is the arithmetic mean value of the upper and lower frequencies at the 35 dB filter
rel
e
c
attenuation level relative to the insertion loss a . All specified data are met within the operating temperature range.
e
D a t a
typ. value
tolerance / limit
a
22,8
dB
max.
24
dB
Insertion loss
(reference level)
e
fN
-
160,0
-
160,0
MHz
kHz
MHz
dB
Nominal frequency
Centre frequency
Passband
fC **
PB
MHz
dB
max.
fC
± 120
± 9,4
1
0,5
max.
Pass band ripple (p-p)
Bandwidth
BW
1
3
35
50
dB
dB
dB
dB
19,2
19,7
21,6
21,9
MHz
MHz
MHz
MHZ
min.
min.
max.
max.
18,8
MHz
MHz
MHz
MHz
19,5
21,7
22,0
a
Relative attenuation
rel
fC
… fC
±
±
±
-
9,4
9,7
11
11
400
MHz
0,5
2
38
54
52
dB
dB
dB
dB
dB
max.
max.
min.
min.
min.
1
3
35
50
48
dB
dB
dB
dB
dB
fC
fC
fC
fC
±
±
-
9,4
10,8
140
11
MHz … fC
MHz … fC
MHz … fC
MHz … fC
MHz
MHz
MHz
MHz
+
+
40
ns
max.
200
ns
Group delay ripple within PB (p-p)
OTR
-
-
- 25 °C ... + 80°C
Operating temperature range
Storage temperature range
- 40 °C ... + 85°C
-
TC ***
f
-75
ppm/K
Temperature coefficient of frequency
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference
values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.
**) at ambient temperature
***) ∆f (Hz) = Tcf(ppm/K) x (T - TA) x fCAT (MHz)
c
Generated:
Checked / Approved:
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 160g.doc
Version 1.2
09.12.2005
VI TELEFILTER
Filter specification
TFS 160G
2/5
Filter characteristic
0
0
-1
2.56
2.41
2.26
2.11
1.96
1.81
1.66
1.51
1.36
1.21
-8
-16
-24
-32
-40
-48
-56
-64
-72
-80
-2
-3
-4
-5
-6
-7
-8
-9
-10
1.06
135.8
140.66
145.52
150.38
155.24
160.1
164.96
169.82
174.68
179.54
184.4
150.1
152.1
154.1
156.1
158.1
160.1
162.1
164.1
166.1
168.1
170.1
frequency in MHz
frequency in MHz
Construction and pin connection
(All dimensions in mm)
13,6Max.
1
2
3
4
Ground
Ground
Ground
Ground
Output
5
6
7
Output RF Return
Ground
TFS 160G
8
9
10
11
12
Ground
Ground
Ground
Input
●
T50
1
Input RF Return
Date code
2,54 ±0,15
1,5
Date code: Year + week
T
2005
2006
2007
2
1
3 4
U
V
...
12
11
5
6
9 8
10
7
0,1
0,8
50 Ω Test circuit
11
5
L
L
SAW
L
C
C
C
2
1, 2, 3, 4, 6, 7, 8, 9, 10, 12
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 160g.doc
Version 1.2
09.12.2005
VI TELEFILTER
Filter specification
TFS 160G
3/5
Stability characteristics, reliability
After the following tests the filter shall meet the whole specification:
1. Shock:
500g, 1 ms, half sine wave, 3 shocks each plane;
DIN IEC 68 T2 - 27
2. Vibration:
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;
DIN IEC 68 T2 - 6
3. Change of
temperature:
-55 °C to 125°C / 30 min. each / 10 cycles
DIN IEC 68 part 2 – 14 Test N
4. Resistance to
solder heat (reflow):
reflow possible: twice max.;
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;
This filter is RoHS compliant (2002/95/EG, 2005/618/EG)
Packing
Tape & Reel:
IEC 286 – 3, with exeption of value for N and minimum bending radius;
tape type II, embossed carrier tape with top cover tape on the upper side;
max. pieces of filters peer reel:
reel of empty components at start:
reel of empty components at start including leader:
trailer:
1700
min. 300 mm
min. 500 mm
min. 300 mm
Pull Off Direction
P1
Tape (all dimensions in mm)
Date Code
W
: 24,00 +0,30/-0,10
Po
P2
t
Do
Po
Do
E
:
:
:
4,00 ± 0,1
1,50 +0,1/-0
1,75 ± 0,10
F
: 11,50 ± 0,10
G(min)
P2
:
:
0,60
2,00 ± 0,1
P1
: 12,00 ± 0,1
D1(min)
Ao
:
:
1,50
7,10 ± 0,10
Ko
Typ
PIN Marker
D1
Ao
Bo
Ct
: 13,90 ± 0,10
: 21,5 ± 0,1
W
2
Reel (all dimensions in mm)
A
:330
W1
: 24,4 +2/-0
W2(max) : 30,4
N(min)
C
: 60
: 13,0 +0,5/-0,2
C
A
N
W
1
The minimum bending radius is 45 mm.
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 160g.doc
Version 1.2
09.12.2005
VI TELEFILTER
Filter specification
TFS 160G
4/5
Air reflow temperature conditions
Conditions
Exposure
Average ramp-up rate (30°C to 217°C)
> 100°C
less than 3°C/second
between 300 and 600 seconds
> 150°C
> 217°C
Peak temperature
between 240 and 500 seconds
between 30 and 150 seconds
max. 260°C
Time within 5°C of actual peak temperature
Cool-down rate (Peak to 50°C)
Time from 30°C to Peak temperature
between 10 and 30 seconds
less than 6°C/second
no greater than 300 seconds
Chip-mount air reflow profile
Temperature / °C
max. 260°C
217°C
Time / s
max. 300 s
10 ... 30 s
30 ... 150 s
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Filename: tfs 160g.doc
Version 1.2
09.12.2005
VI TELEFILTER
Filter specification
TFS 160G
5/5
History
Version
1.0
Reason of changes
- Generation of development specification
Name
Strehl
Date
24.05.2005
28.10.2005
1.1
- terminating impedance, typical values, filter characteristic and matching configuration added Pfeiffer
- limits for relative attenuation in fC + 11 MHz… fC+ 400 MHz changed to 48dB
1.2
- limits of insertion loss, centre frequency and relative attenuation changed
- stability characteristics modified
Pfeiffer
09.12.2005
Tele Filter GmbH
Potsdamer Straße 18
D 14 513 TELTOW / Germany
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30
E-Mail: tft@telefilter.com
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
相关型号：
©2020 ICPDF网 联系我们和版权申明