TFS817 [VECTRON]

Filter specification; 过滤器规格


型号：	TFS817
厂家：	Vectron International, Inc
描述：	Filter specification 过滤器规格过滤器 LTE
文件：	总5页 (文件大小：242K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Filename: tfs 817.doc

Version 1.1

23.05.2006

VI TELEFILTER

Filter specification

TFS 817

1/5

Measurement condition

Ambient temperature:

Input power level:

Terminating impedance: *

Input:

°C

dBm

357 Ω || -2,5 pF

231 Ω || -3,2 pF

Output:

Characteristics

Remark:

The reference level for the relative attenuation a of TFS 817 is the minimum of the pass band attenuation a

. This value is defined as the insertion loss

rel

a . The centre frequency f is the arithmetic mean value of the upper and lower frequencies at the 1 dB filter attenuation level relative to the insertion loss

min

a . The given values for the relative attenuation a

and the group delay ripple have to be reached at the frequencies given below, even if the centre

rel

frequency f is shifted due to the temperature coefficient of frequency TC in the operating temperature range and due to a production tolerance for the

centre frequency f .

D a t a

typ. value

tolerance / limit

Insertion loss

12,8

max.

(reference level)

Nominal frequency

Centre frequency

Passband

f_N

817

MHz

f_C

817

MHz

f_N

MHz

Pass band ripple

0,6

0,2

max.

Amplitude ripple within any 150 kHz in PB

Bandwidth

0,5

118

MHz

min.

106

MHz

Relative attenuation

rel

500

910

1150

3000

MHz

MHz … 1150

MHz … 3000

MHz … 5000

…

500

715

MHz

min.

Absolute group delay within PB

Group delay ripple within any 150kHz in PB

Input return loss

115

100

max.

min.

max.

Output return loss

IP3 **

OTR

Intermodulation

+10

dBm

Input power level

Permissible DC voltage

Operating temperature range

Storage temperature range

- 35 °C ... + 85°C

- 40 °C ... + 85°C

Temperature coefficient of frequency

TC ***

-92

ppm/K

*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values

only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.

**) Two tones +5dBm, 100kHz apart

***) ∆ f(Hz) =TC_f(ppm/K) x(T-T₀) x f_To(MHz)

Generated:

Checked / Approved:

Tele Filter GmbH

Potsdamer Straße 18

D 14 513 TELTOW / Germany

Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30

E-Mail: tft@telefilter.com

VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is

assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Filename: tfs 817.doc

Version 1.1

23.05.2006

VI TELEFILTER

Filter specification

TFS 817

2/5

Filter characteristic

-0.4

-0.8

-1.2

-1.6

-2

0.65

0.59

0.53

0.47

0.41

0.35

0.29

0.23

0.17

0.11

-6

-12

-18

-24

-30

-36

-42

-48

-54

-60

-2.4

-2.8

-3.2

-3.6

-4

0.05

545.5

599.5

653.5

707.5

761.5

815.5

869.5

923.5

977.5

1031.5

1085.5

747.5

761.1

774.7

788.3

801.9

815.5

829.1

842.7

856.3

869.9

883.5

frequency in MHz

Construction and pin connection

(All dimensions in mm)

Input

Input RF Return

Ground

Output

Output RF Return

Ground

817

● U20

Date code

Ground

Date code: Year + week

...

2006

2007

2008

1,1

2,54

50 Ohm Test circuit

SAW

3, 4, 7, 8

Tele Filter GmbH

Potsdamer Straße 18

D 14 513 TELTOW / Germany

Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30

E-Mail: tft@telefilter.com

VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is

assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Filename: tfs 817.doc

Version 1.1

23.05.2006

VI TELEFILTER

Filter specification

TFS 817

3/5

Stability characteristics

After the following tests the filter shall meet the whole specification:

1. Shock:

500g, 1 ms, half sine wave, 3 shocks each plane;

DIN IEC 68 T2 - 27

2. Vibration:

10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;

DIN IEC 68 T2 - 6

3. Change of

temperature:

-55 °C to 125°C / 30 min. each / 10 cycles

DIN IEC 68 part 2 – 14 Test N

4. Resistance to

solder heat (reflow):

reflow possible: twice max.;

for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;

This filter is RoHS compliant (2002/95/EG, 2005/618/EG)

Packing

Tape & Reel:

IEC 286 – 3, with exception of value for N and minimum bending radius;

tape type II, embossed carrier tape with top cover tape on the upper side;

max. pieces of filters per reel:

reel of empty components at start:

reel of empty components at start including leader:

trailer:

3000

min. 300 mm

min. 500 mm

min. 300 mm

Pull Off Direction

Tape (all dimensions in mm)

: 12,00 ± 0,3

PIN Marker

4,00 ± 0,1

1,50 +0,1/-0

1,75 ± 0,1

5,50 ± 0,05

0,75

2,00 ± 0,05

8,00 ± 0,1

1,50

G(min)

D1(min)

Typ

Date Code

5,30 ± 0,1

9,5 ± 0,1

Reel (all dimensions in mm)

:330

: 12,4 +2/-0

W2(max) : 18,4

N(min)

: 50

: 13,0 +0,5/-0,2

The minimum bending radius is 45 mm.

Tele Filter GmbH

Potsdamer Straße 18

D 14 513 TELTOW / Germany

Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30

E-Mail: tft@telefilter.com

VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is

assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Filename: tfs 817.doc

Version 1.1

23.05.2006

VI TELEFILTER

Filter specification

TFS 817

4/5

Air reflow temperature conditions

Conditions

Exposure

Average ramp-up rate (30°C to 217°C)

> 100°C

less than 3°C/second

between 300 and 600 seconds

> 150°C

> 217°C

Peak temperature

between 240 and 500 seconds

between 30 and 150 seconds

max. 260°C

Time within 5°C of actual peak temperature

Cool-down rate (Peak to 50°C)

Time from 30°C to Peak temperature

between 10 and 30 seconds

less than 6°C/second

no greater than 300 seconds

Chip-mount air reflow profile

Temperature / °C

max. 260°C

217°C

Time / s

max. 300 s

10 ... 30 s

30 ... 150 s

Tele Filter GmbH

Potsdamer Straße 18

D 14 513 TELTOW / Germany

Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30

E-Mail: tft@telefilter.com

VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is

assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Filename: tfs 817.doc

Version 1.1

23.05.2006

VI TELEFILTER

Filter specification

TFS 817

5/5

History

Version

1.0

Reason of Changes

Generation of development specification

Name

Date

Strehl

Chilla

09.05.2005

23.05.2006

1.1

- generated filter specification

- added terminating impedances

- added typical values

- added filter characteristic

- added test circuit

Tele Filter GmbH

Potsdamer Straße 18

D 14 513 TELTOW / Germany

Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30

E-Mail: tft@telefilter.com

Filter specification

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-

VECTRON