TX-0800-BAP-466 [VECTRON]

Temperature Compensated Crystal Oscillator; 温度补偿晶体振荡器
TX-0800-BAP-466
型号: TX-0800-BAP-466
厂家: Vectron International, Inc    Vectron International, Inc
描述:

Temperature Compensated Crystal Oscillator
温度补偿晶体振荡器

振荡器 晶体振荡器 温度补偿
文件: 总4页 (文件大小:289K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
TX-080  
Temperature Compensated Crystal Oscillator  
TX-080  
Description  
The TX-080 series o!ers performance for short-term stability, phase noise, aging and temperature stability normally only  
associated with Oven Controlled Crystal Oscillators, while consuming typically <20 mA.  
Features  
Applications  
• Severe Environmental Conditions  
• Stratum 3 option  
• “1 ppm Foreveroption (0° to 50°C and 0° to 70°C)  
• Frequency Range: 0.5 MHZ to 160 MHZ  
• Previous Model: TC-140  
Performance Speci!cations  
Parameter  
Min  
Typ  
Max  
Units  
Condition  
Frequency Stabilities1  
vs. operating temperature range  
(referenced to +25°C)  
-4.6  
-1.0  
-4.6  
-1.0  
-0.5  
STS3  
-4.6  
-1.0  
-0.2  
STS3  
+4.6  
+1.0  
+4.6  
+1.0  
+0.5  
STS3  
+4.6  
+1.0  
+0.2  
STS3  
ppm  
ppm  
ppm  
ppm  
ppm  
ppm  
ppm  
ppm  
ppm  
ppm  
-40… +85°C  
-40… +85°C  
0… +70°C  
0… +70°C  
0… +70°C  
0… +70°C  
0… +50°C  
0… +50°C  
0… +50°C  
0… +50°C  
vs. supply voltage change  
-0.05  
+0.05  
ppm  
Vs 5ꢀ  
Supply Voltage (Vs)  
Supply voltage (Standard)  
Supply voltage (Option)  
11.25  
4.75  
12.0  
5.0  
12.75  
5.25  
VDC  
VDC  
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com  
Performance Speci!cations  
Parameter  
Min  
Typ  
Max  
RF Output  
HCMOS  
Units  
Condition  
0.5 to 160 MHz  
Signal  
Load  
10 TTL  
100 k ohm // 10 pF  
+0.5  
Vdc  
V
V
Signal Level (Vol)  
Signal Level (Voh)  
0.8  
(Vdd)  
5
ns  
Rise/Fall Time  
Duty cycle  
Signal  
40  
60  
10 TTL  
0.5 to 160 MHz  
10 TTL  
Load  
+0.5  
Vdc  
VDC  
VDC  
Signal Level (Vol)  
Signal Level (Voh)  
+2.4  
Vdc  
10  
60  
ns  
Rise/Fall Time  
Duty cycle  
Signal  
40  
Sinewave  
50  
+3.0  
3.0 to 100 MHz  
50 ohm load  
ohm  
dBm  
dBc  
Load  
0.0  
+6.0  
-20  
Output Power (Standard)  
Harmonics  
Spurious  
-60  
dBc  
Sinewave  
3.0 to 100 MHz (+12 Vdc only)  
50 ohm load  
Signal (custom number required)  
Load  
50  
ohm  
dBm  
+7  
+13.0  
Output Power (Option)  
Harmonics  
-20  
-80  
dBc  
dBc  
Spurious  
Frequency Tuning (EFC)  
Fixed; No adjust  
ppm  
Tuning Range  
Tuning Range  
Tuning Range  
3.0  
3.0  
via internal mechanical adjust  
positive slope  
ppm  
via external voltage, 0 to +5 Vdc  
Additional Parameters1  
Phase Noise3 (10 MHz, +12 Vdc, J - Output)  
-110  
-135  
-150  
-155  
dBc/Hz  
dBc/Hz  
dBc/Hz  
dBc/Hz  
10 Hz  
100 Hz  
1 kHz  
10 kHz  
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com  
Outline Drawing / Enclosure  
Dimensions in inches  
Type A  
Height “H”  
15.494  
Code  
0
Pin Length “L”  
5.842  
Pin Connections  
Output  
1
2
3
4
5
Supply  
Ground (Case)  
Freq. Adjust  
Ground  
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com  
Ordering Information  
TX - 080 0 - D A T - 106 A - 10M0000000  
Frequency  
Product Family  
TX: TCXO  
Tuning Option  
A: No Tuning  
Package  
38 x 38 mm  
B: via internal mechanical  
C: via external voltage  
Height  
0: A15.494mm  
Stability Code  
466: 4.6ppm  
106: 1.0ppm  
507: 0.5ppm  
207: 0.2ppm  
STS: Stratum3  
Supply Voltage  
B: 12 Vdc  
D: 5 Vdc  
1PMF: 1.0ppm for 10 years  
RF Output Code  
A: HCMOS  
B: TTL  
E: Sinewave  
Temperature Range  
E: -40°C to +85°C  
T: 0°C to +70°C  
P: 0°C to +50°C  
Notes:  
1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all  
frequencies.  
2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency  
control voltage, load, temperature (25°C).  
3. Phase noise degrades with increasing output frequency.  
4. Subject to technical modi$cation.  
5. Contact factory for availability.  
For Additional Information, Please Contact  
USA:  
Europe:  
Vectron International  
Landstrasse, D-74924  
Neckarbischofsheim, Germany  
Tel: +49 (0) 3328.4784.17  
Asia:  
Vectron International  
1F-2F, No 8 Workshop, No 308 Fenju Road  
WaiGaoQiao Free Trade Zone  
Pudong, Shanghai, China 200131  
Tel: 86.21.5048.0777  
Vectron International  
267 Lowell Road  
Hudson, NH 03051  
Tel: 1.888.328.7661  
Fax: 1.888.329.8328  
Fax: +49 (0) 3328.4784.30  
Fax: 86.21.5048.1881  
Disclaimer  
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application.  
No rights under any patent accompany the sale of any such product(s) or information.  
Rev: 12/9/2008 daf  
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com  

相关型号:

TX-0800-BAP-507

Temperature Compensated Crystal Oscillator
VECTRON

TX-0800-BAT-106

Temperature Compensated Crystal Oscillator
VECTRON

TX-0800-BAT-207

Temperature Compensated Crystal Oscillator
VECTRON

TX-0800-BAT-466

Temperature Compensated Crystal Oscillator
VECTRON

TX-0800-BAT-507

Temperature Compensated Crystal Oscillator
VECTRON

TX-0800-BBE-106

Temperature Compensated Crystal Oscillator
VECTRON

TX-0800-BBE-207

Temperature Compensated Crystal Oscillator
VECTRON

TX-0800-BBE-466

Temperature Compensated Crystal Oscillator
VECTRON

TX-0800-BBE-507

Temperature Compensated Crystal Oscillator
VECTRON

TX-0800-BBP-106

Temperature Compensated Crystal Oscillator
VECTRON

TX-0800-BBP-207

Temperature Compensated Crystal Oscillator
VECTRON

TX-0800-BBP-466

Temperature Compensated Crystal Oscillator
VECTRON