TX-3090-DEB-13SX [VECTRON]
Hi-Rel Temperature Compensated Crystal Oscillator; 高可靠性温度补偿晶体振荡器型号: | TX-3090-DEB-13SX |
厂家: | Vectron International, Inc |
描述: | Hi-Rel Temperature Compensated Crystal Oscillator |
文件: | 总6页 (文件大小:306K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TX-309
Hi-Rel Temperature Compensated Crystal Oscillator
TX-309
Features
Applications
• Reference clock for space and satellite
• Military airborne and mobile systems
• Radiation Tolerant
• Small footprint
• Frequency Range: 0.3 MHZ to 150 MHZ
• Previous Model: C2501
Performance Speci!cations
Parameter
Min
Typ
Max
Units
Condition
Frequency Stabilities1
vs. operating temperature range
(referenced to +25°C)
-10
-4
+10
+4
ppm
ppm
ppm
ppm
-55… +105°C
-40… +85°C
-20… +70°C
0… +50°C
-2
+2
+1
-1
vs. aging / 1 year
vs. aging / 10 years
-1
-5
+1
+5
ppm
ppm
Short Term Stability
-1
+1
ppb/sec
Supply Voltage (Vs)
Supply voltage
Supply voltage
Supply voltage
Current
14.25
4.75
15.0
5.0
15.75
5.25
VDC
VDC
VDC
3.135
3.3
3.465
50
35
mA
mA
ACMOS output
Sinewave output
RF Output
CMOS
60
Signal
Duty Cycle
Rise\Fall time
Logic Level “0”
40
%
ns
V
+5
(10% to 90%) with 2CMOS Loads
+0.5
Vcc
-0.5V
V
Logic Level “1”
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Performance Speci!cations
Parameter
Min
Typ
Max
Units
Condition
Signal
Sinewave
+7
+3
dBm
dBm
Output Power
standard
-20
-20
-70
dBc
dBc
dBc
(>75 MHz)
Harmonics
Sub-Harmonics
Spurious
(>75 MHz)
Frequency Tuning (EFC)
Sufficient to tune to nominal frequency for 10 years
Additional Parameters
Tuning Slope
Phase Noise (10MHz)
-95
-125
dBc/Hz
dBc/Hz
10 Hz
100 Hz
1 KHz
-145
-150
-150
dBc/Hz
dBc/Hz
dBc/Hz
10 KHz
100 KHz
Phase Noise (>75MHz)
-75
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
10 Hz
100 Hz
1 KHz
-105
-135
-145
-145
10 KHz
100 KHz
Weight
30
g
Absolute Maximum Ratings
Supply voltage (Vs)
-0.5
-0.5
+7.0
+20
V
V
(ACMOS)
(Sinewave)
DC Input Current
+50
300
mA
°C
Lead Temperature (Soldering, 10 seconds)
Operable temperature range
Storage temperature range
-55
-62
+125
+125
°C
°C
Environmental Characteristics
Mil-STD-202, Method 204, TC “D”
Sine Vibration
Random Vibration
Shock
Mil-STD-202, Method 214 TC “I-K”(15 minutes per axis)
Mil-STD-202, Method 213, TC “F”
Acceleration
Altitude
Mil-STD-883, Method 2001, TC “A”
50,000 feet minimum to deep space
Radiation testing is not performed at the oscillator level, but these TCXOs have
been acceptable for use in environments of up to 100K rads total dose, by analysis
of the components used. The TTL Output TCXOs are assembled with all bipolar
semiconductors. The CMOS Output TCXOs are assembled with all bipolar
semiconductors with the exception of the ACMOS chip used to provide the CMOS
output. A CMOS chip that is from a radation tested, certi" ed wafer lot can be provided
if speci"ed on the Purchase Order. A copy of the parts list and materials can be
provided for customer review.
Radiation
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Performance Speci!cations
Parameter
Min
Typ
Max
Units
Condition
Manufacturing Information
QUARTZ CRYSTAL
For the # ight models, swept quartz shall be used in the manufacture of the crystals. For the Engineering models, non-swept quartz
shall be used.
TRAVELLERS
Travellers or Process Cards are used in the manufacturing and testing of all Hi-Rel TCXOs and are available for customer review. Copies
of these Travellers can be provided with the TCXOs at time of shipment if so speci" ed on the purchase order.
TRACEABILITY and HOMOGENEOUS MATERIAL
Option Codes ‘S’& ‘R’only
Manufacturing lot and date code information shall be recorded, by TCXO serial number, of every component and all materials used in
the manufacture of that TCXO. Also all semiconductors used in the manufacture of any given Production Lot of TCXOs, shall be from
the wafer and have the same manufacturing lot date code. A Production Lot, as de" ned by Corning, is all oscillators that have been
kitted and assembled as a single group. After the initial kitting and assembly, this Production Lot may be divided into multiple sublots
to facilitate alignment and test capacity and may be sealed at multiple times within a 13 week window.
TEST DATA
All Test Data is recorded by TCXO serial number. Copies of this data can be provided with the TCXOs at time of shipment if so speci"ed
on the purchase order.
REWORK
All rework follows the requirements of Mil-PRF-55310 Class ‘S’for Option Code ‘S’and Class ‘B’for Option Codes ‘R’, ‘B’and ‘C’. The only
exception is the Select-At-Test components may be replaced up to four times.
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Performance Speci!cations
CONSTRUCTION, SCREENING & TESTING OPTIONS
NOTE: For Engineering or Prototype TCXOs requiring basic electrical testing only and no Screening, or Groups ‘A’and ‘B’Testing, use
the code letter ‘E’.
Operation \ Code
“S”
“R”
“C”
“B”
Design, Construction
& Component Screen
(see Mfging Section)
Mil-PRF-55310 Class ‘S’
Mil-PRF-55310 Class ‘B’
Mil-PRF-55310 Class ‘B’
Mil-PRF-55310 Class ‘B’
M883, Method
2017 for Class ‘S’
M883, Method
2017 for Class ‘B’
M883, Method
2017 for Class ‘B’
M883, Method
2017 for Class ‘B’
Workmanship
Screening
Mil-PRF-55310 Class ‘B’
modi"ed
Mil-PRF-55310 Class ‘S’
100%
Mil-PRF-55310 Class ‘S’
100%
Mil-PRF-55310 Class ‘B’
N/A
Non-Destruct Wire
Bond Pull
N/A
M883, Method
2017 for Class ‘S’
M883, Method
2017 for Class ‘B’
M883, Method
2017 for Class ‘B’
M883, Method
2017 for Class ‘B’
Internal Visual
48 hrs minimum @
+150°C
48 hrs minimum @
+150°C
48 hrs minimum @
+150°C
48 hrs minimum @
+150°C
Stabilization Bake
Thermal Shock
M883, Method
1011, TC ‘A’
M883, Method
1011, TC ‘A’
N/A
N/A
M883, Method
2001, TC ‘A’(5000
gs, Y1 Axis only)
M883, Method
2001, TC ‘A’(5000
gs, Y1 Axis only)
M883, Method
2001, TC ‘A’(5000
gs, Y1 Axis only)
M883, Method
2001, TC ‘A’(5000
gs, Y1 Axis only)
Constant Acceleration
Seal Test ("ne & gross)
PIND
100%
100%
100%
100%
N/A
M883, Method
2020, TC ‘B’
M883, Method
2020, TC ‘B’
M883, Method
2020, TC ‘B’
Electrical Test Frequency,
Output levels, Input
Current
@ +25°C only
@ +25°C only
@ +25°C only
@ +25°C only
Burn-In
(Powered with load)
+125°C for 240 hours
+125°C for 240 hours
+125°C for 160 hours
+125°C for 160 hours
Electrical Test Frequency, @ +25°C & Temp
Extremes speci" ed
in Table II
@ +25°C & Temp
Extremes speci" ed
in Table II
@ +25°C & Temp
Extremes speci" ed
in Table II
@ +25°C & Temp
Extremes speci" ed
in Table II
Output levels, Input
Current
2% applies to Input
Current @ +25°C
2% applies to Input
Current @ +25°C
10% applies to Input
Current @ +25°C
10% applies to Input
Current @ +25°C
PDA
Radiographic
Group ‘A’
M883, Method 2012
100%
M883, Method 2012
100%
N/A
N/A
Sample per
Mil-PRF-55310
Sample per
Mil-PRF-55310
Group ‘B’(30 day Aging
@ +70°C)
Sample per
Mil-PRF-55310
Sample per
Mil-PRF-55310
100%
100%
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Outline Drawing / Enclosure
Pin Connections
Ground
Dimensions in [inches] mm
1,3,7,12,14
2
Supply
Type B
4,5,9,10,11
No Connection
External Frequency Control
RF Output
Code
0
Height “H”
0.5”
Pin Length “L”
0.65”
6
13
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
Ordering Information
TX - 309 0 - D E E - 13S X - 10M0000000
Frequency
Product Family
TX: TCXO
Platform Code
X: Not Used
Package
20 x 20 mm
Height
0: B0.5”
Platform Code
Output Power (1st digit)
0: +3 dBm
1: +7 dBm
Supply Voltage
A: 15 Vdc
D: 5 Vdc
E: 3.3 Vdc
Stability (2 digit)
0: 1ppm
1: 2ppm
RF Output Code
A: CMOS
E: Sinewave
2: 4ppm
3: 10ppm
Temperature Range
Screening (3 digit)
B: -55°C to +105°C
E: -40°C to +85°C
J: -20°C to +70°C
P: 0°C to +50°C
S: Class “S”Level Screening
R: Class “S”, Class B components
C: “C”Class B modi"ed
B: Class “B”Level Screening
E: Engineering Model
Notes:
1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all
frequencies.
2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency
control voltage, load, temperature (25°C).
3. Phase noise degrades with increasing output frequency.
4. Subject to technical modi"cation.
5. Contact factory for availability.
For Additional Information, Please Contact
USA:
Europe:
Vectron International
Landstrasse, D-74924
Neckarbischofsheim, Germany
Tel: +49 (0) 3328.4784.17
Asia:
Vectron International
1F-2F, No 8 Workshop, No 308 Fenju Road
WaiGaoQiao Free Trade Zone
Pudong, Shanghai, China 200131
Tel: 86.21.5048.0777
Vectron International
267 Lowell Road
Hudson, NH 03051
Tel: 1.888.328.7661
Fax: 1.888.329.8328
Fax: +49 (0) 3328.4784.30
Fax: 86.21.5048.1881
Disclaimer
Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application.
No rights under any patent accompany the sale of any such product(s) or information.
Rev: 2/23/2009 daf
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
相关型号:
©2020 ICPDF网 联系我们和版权申明