VCC6-DLB-106M25 [VECTRON]
106M250/212M500 Dual Rate PECL and LVDS Oscillator; 106M250 / 212M500双速率PECL和LVDS振荡器型号: | VCC6-DLB-106M25 |
厂家: | Vectron International, Inc |
描述: | 106M250/212M500 Dual Rate PECL and LVDS Oscillator |
文件: | 总7页 (文件大小:186K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VCC6-D
106M250/212M500 Dual Rate PECL and LVDS Oscillator
Features
· 3.3V LVPECL or 3.3V LVDS
· Output frequency select
· Enable/Disable output for test and board debug
· Hermetically sealed ceramic SMD package
· Excellent Power Supply Noise Rejection
· Product is compliant to RoHS directive
and fully compatible with lead free assembly
The VCC6-D Crystal Oscillator
Applications
· 1Gbps, 2Gbps, 4 Gbps Fiber Channel
· Storage Area Network
· Host Bus Adapter
· RAID controller
Description
Vectron’s VCC6-D Crystal Oscillator (XO) is
quartz stabilized square wave generator with a
LV-PECL or LVDS output, operating off a 3.3 volt
supply.
The VCC6 uses high quality on-chip multiplier to
multiply a 26.5625 crystal to either 106M250 or
212M500.
Vectron International 267 Lowell Road, Hudson NH 03051
Tel: 1-88-VECTRON-1
e-mail: vectron@vectron.com
VCC6-D, Dual Rate 106.250/212.500 LVPECL or LVDS XO
Performance Characteristics
Table 1. Electrical Performance
Parameter
Symbol
fO
Min
Typical
106.250 / 212.500
Max
Units
MHz
V
Frequency
Supply Voltage
1
VDD
IDD
3.0
3.6
65
67
Supply Current, PECL
50
53
mA
LVDS
Output Logic Levels, 0/70°C
PECL Output Logic High2
PECL Output Logic Low2
LVDS Output High Voltage
LVDS Output Low Voltage
LVDS Differential Output Voltage
LVDS Change in Magnitude
LVDS Offset Output Voltage
LVDS Change in Magnitude of Output Offset
Transition Times
VOH
VOL
VOH
VOL
VDD-1.025
V
V
V
VDD-1.620
1.475
0.925
250
V
|VOD
|
400
25
1.275
25
mV
mV
V
delta|VOD
VOS
delta|VOS|
|
1.125
mV
Rise Time2
tR
tF
SYM
600
600
55
ps
ps
%
°C
ppm
pS
pS
V
Fall Time2
Symmetry or Duty Cycle3
Operating temperature
45
50
-10/70
Stability (ordering option)4
RMS Jitter, 12kHz to 20 MHz, fO<200MHz
Cycle-Cycle Jitter, rms
Output Enabled5 , Frequency Select
Output Disabled5, Frequency Select
Logic Input Current, High
Logic Input Current, Low
Package Size
+/-50 or +/-100
0.75
4
VIH
VIL
IIH
2
0.8
+10
+50
V
-10
-50
uA
uA
mm
IIL
5.0 x 7.5 x 1.8
1. A 0.01uF and a 0.1uF capacitor should be located as close to the supply as possible (to ground) is recommended.
2. Figure 1 defines these parameters. Figure 2 illustrates the operating conditions under which
these parameters are tested and specified.
3. Symmetry is measured defined as Vs, On Time/Period.
4. Includes calibration tolerance, operating temperature, supply voltage variations, aging (40 degreesC/10 years) and shock and
vibration (not under operation). Aging budget is +/-5 ppm.
5. Output w ill be enabled if enable/disable is left open. Output frequency=106M250 if FREQ is left open.
tF
tR
(>0.975V, Open)
(+2V)
1
2
3
6
5
4
%
80
COutput
Vs
(-0.5V)
Output
50
20%
On Time
W
W
50
Test Circuit Notes:
1) To Permit 50W Measurement of Outputs, all DC Inputs are Biased Down 0.5V.
Period
2) All VoltageSources Contain Bypass Capacitors to Minimize Supply Noise.
W
3) 50 Terminations are Within Test Equipment.
Figure 1. Output Waveform
Figure 2. Typical Output Test Conditions (25±5°C)
Vectron International 267 Lowell Rd, Hudson NH 03051 Tel: 1-88-VECTRON-1
e-mail: vectron@vectron.com
VCC6-D, Dual Rate 106.250/212.500 LVPECL or LVDS XO
Typical Phase Noise at 106.25MHz
Typical Phase Noise at 212.50MHz
Vectron International 267 Lowell Rd, Hudson NH 03051 Tel: 1-88-VECTRON-1
e-mail: vectron@vectron.com
VCC6-D, Dual Rate 106.250/212.500 LVPECL or LVDS XO
Outline Diagram and Pin Out
Contact pads are gold over nickel
Pin #
1
Symbol
E/D
Function
Output disabled when=logic 0, Output Enabled when=logic1
Device has an internal pull-up resistor.
Output=106M25 when = logic 1, 212M50 when = logic 0
Device has as an internal pull-up resistor.
Ground
2
FREQ
3
4
5
6
GND
fO
Cf o
VDD
Output Frequency
Complementary Output Frequency
Supply Voltage
Tape and Reel
J
F
G
D
C
B
A
I
L
E
H
K
Tape and Reel Dimensions (mm)
Tape Dimensions
Reel Dimensions
# Per
Product
A
B
C
D
E
F
G
H
I
J
K
L
Reel
12
5.5
1.5
4
8
1.78
20.6
13
55
6
12.4
178
VCC6
250
Vectron International 267 Lowell Rd, Hudson NH 03051 Tel: 1-88-VECTRON-1
e-mail: vectron@vectron.com
VCC6-D, Dual Rate 106.250/212.500 LVPECL or LVDS XO
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can permanently damage the device. Functional
operation is not implied at these or any other conditions in excess of conditions represented in the
operational sections of this data sheet. Exposure to absolute maximum ratings for extended periods may
adversely affect device reliability.
Table 2. Absolute Maximum Ratings
Parameter
Power Supply
Enable/Disable
Storage Temperature
Symbol
VDD
VIN
Tstorage
Ratings
-0.5 to +5.0
-0.5 to VDD+0.5
-55/125
Unit
Vdc
Vdc
°C
Reliability
The VCC6 qualification tests will include the following:
Table 3. EnvironnementalCompliance
Parameter
Conditions
Mechanical Shock
Mechanical Vibration
Solderability
Gross and Fine Leak
Resistance to Solvents
MIL-STD-883 Method 2002
MIL-STD-883 Method 2007
MIL-STD-883 Method 2003
MIL-STD-883 Method 1014
MIL-STD-883 Method 2016
Handling Precautions
Although ESD protection circuitry has been designed into the the VCC6, proper precautions should be taken
when handling and mounting. VI employs a Human Body Model and a Charged-Device Model (CDM) for
ESD susceptibility testing and design protection evaluation. ESD thresholds are dependent on the circuit
parameters used to define the model. Although no industry wide standard has been adopted for the CDM, a
standard HBM of resistance = 1.5kohms and capacitance = 100pF is widely used and therefore can be
used for comparison purposes.
Table 4. ESD Ratings
Model
Human Body Model
Charged Device Model
Minimum
1000
Conditions
MIL-STD-883 Method 3115
JESD 22-C101
1000
Vectron International 267 Lowell Rd, Hudson NH 03051 Tel: 1-88-VECTRON-1
e-mail: vectron@vectron.com
VCC6-D, Dual Rate 106.250/212.500 LVPECL or LVDS XO
Suggested IR profile
The VCC6 has been qualified to meet the JEDEC standard for Pb-Free assembly. The temperatures and
time intervals listed are based on the Pb-Free small body requirements and parameters are listed in Table 7.
The VCC6 is hermetically sealed so an aqueous wash is not an issue.
Table 7. Reflow Profile
Parameter
PreHeat Time
Ramp Up
Symbol
t S
Value
60 sec Min, 180 sec Max
3 oC/sec Max
RUP
t L
o
Time Above 217 C
Time To Peak Temperature
Time At 260 oC (max)
Time At 240 °C (max)
Ramp Down
60 sec Min, 150 sec Max
480 sec Max
t AMB-P
t P
10 sec Max
tp2
60 sec Max
6 oC/sec Max
RDN
Vectron International 267 Lowell Rd, Hudson NH 03051 Tel: 1-88-VECTRON-1
e-mail: vectron@vectron.com
VCC6-D, Dual Rate 106.250/212.500 LVPECL or LVDS XO
Frequencies (MHz) which are being developed
106.25/212.50
Other frequencies may be available upon request. Standard frequencies are frequencies which the crystal
has been designed and does not imply a stock position.
Ordering Information
VCC6-Dxx – 106M25
Product Family
Crystal Oscillator
Supply Voltage, Output
D= Dual Rate
Frequency MHz
example: 106M250= 106.25/212.50MHz
Stability Options/Temperature
A: +/-100ppm/ -10 to 70 C
B: +/-50ppm/-10 to 70 C
PECL/LVDS
Q: 3.3volt, LVPECL
L: 3.3volt, LVDS
Also available is a VCC6-1091 which is fixed at 212.500MHz, LVPECL, 50ppm over -10 to 70C, and a VCC6-
1121 which is fixed at 212.500MHz, LVPECL and is 100ppm over -10 to 70C.
For Additional Information, Please Contact:
USA: Vectron International · 267 Lowell Road, Hudson, NH 03051 · Tel: 1-88-VECTRON-1 ·
Fax: 1-888-FAX-VECTRON
EUROPE: VI Telefilter · Potsdamer Straße 18, 14513 Teltow, Germany
Tel: 49 (0) 3328 4784 17 · Fax: 49 (0) 3328 4784 30
ASIA: Vectron Asia Pacific Sales Office
Unit 3119 31st Floor, Jin Mao Tower, 88 Century Boulevard, Shanghai, P.R. China 200120
Tel: +86 21 28909740 / 41 / 42 · Fax: +86 21 28909240 / 2890999
www.vectron.com
Vectron International reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed
as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
VCC6-D (REVISION DATE: April18 2005)
Vectron International 267 Lowell Rd, Hudson NH 03051 Tel: 1-88-VECTRON-1
e-mail: vectron@vectron.com
相关型号:
VCC6-LAA-100M00000
LVDS Output Clock Oscillator, 100MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-6
MICROSEMI
VCC6-LAA-105M0000
LVDS Output Clock Oscillator, 105MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-6
MICROSEMI
VCC6-LAA-106M2500
LVDS Output Clock Oscillator, 106.25MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-6
MICROSEMI
VCC6-LAA-10M0000
LVDS Output Clock Oscillator, 10MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-6
MICROSEMI
VCC6-LAA-110M00000
LVDS Output Clock Oscillator, 110MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-6
MICROSEMI
VCC6-LAA-112M00000
LVDS Output Clock Oscillator, 112MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-6
MICROSEMI
VCC6-LAA-112M5000
LVDS Output Clock Oscillator, 112.5MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-6
MICROSEMI
VCC6-LAA-120M0000
LVDS Output Clock Oscillator, 120MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-6
MICROSEMI
VCC6-LAA-122M88000
LVDS Output Clock Oscillator, 122.88MHz Nom, ROHS COMPLIANT, HERMETIC SEALED, CERAMIC PACKAGE-6
MICROSEMI
©2020 ICPDF网 联系我们和版权申明