|
|
元器件型号: |
MI-J2Z-IA-F2 |
生产厂家: |
VICOR CORPORATION
|
描述和应用: |
DC-DC Regulated Power Supply Module, 1 Output, 10W, Hybrid, 光电二极管 |
PDF文件: |
总6页 (文件大小:179K) |
下载文档: |
下载PDF数据表文档文件 |
型号参数:MI-J2Z-IA-F2参数 |
是否无铅 | 含铅 |
是否Rohs认证 | 不符合 |
生命周期 | Active |
IHS 制造商 | VICOR CORP |
包装说明 | , |
Reach Compliance Code | not_compliant |
ECCN代码 | EAR99 |
风险等级 | 5.85 |
其他特性 | REMOTE SHUTDOWN |
模拟集成电路 - 其他类型 | DC-DC REGULATED POWER SUPPLY MODULE |
认证 | CE |
效率(主输出) | 90% |
高度 | 12.7 mm |
最大输入电压 | 50 V |
最小输入电压 | 18 V |
标称输入电压 | 28 V |
JESD-30 代码 | R-PDMA-P9 |
JESD-609代码 | e0 |
长度 | 57.9 mm |
最大电网调整率 | 0.5% |
最大负载调整率 | 0.5% |
功能数量 | 1 |
输出次数 | 1 |
端子数量 | 9 |
最高工作温度 | 100 °C |
最低工作温度 | -40 °C |
最大输出电压 | 2.2 V |
最小输出电压 | 1 V |
标称输出电压 | 2 V |
封装主体材料 | PLASTIC/EPOXY |
封装形状 | RECTANGULAR |
封装形式 | MICROELECTRONIC ASSEMBLY |
峰值回流温度(摄氏度) | NOT SPECIFIED |
认证状态 | Not Qualified |
纹波电压(主输出) | 0.05304 Vrms |
子类别 | Power Supply Modules |
表面贴装 | NO |
技术 | HYBRID |
温度等级 | INDUSTRIAL |
端子面层 | TIN LEAD OVER COPPER |
端子形式 | PIN/PEG |
端子位置 | DUAL |
处于峰值回流温度下的最长时间 | NOT SPECIFIED |
最大总功率输出 | 10 W |
微调/可调输出 | YES |
宽度 | 61 mm |
Base Number Matches | 1 |
MAX34334CSE前5页PDF页面详情预览
Data Sheet
MI-J00
Features
• Inputs:
28 Vdc per MIL-STD-704D/E/F
155 Vdc per MIL-STD-1399A
270 Vdc per MIL-STD-704D/E/F
• Single output: 2 – 48 Vdc
• Up to 23 W/in
3
• MIL-STD-810 environments
• Up to 90% efficiency
• Remote sense
• Current limit
• ZCS power architecture
• Low noise FM control
• Size: 2.28" x 2.4" x 0.5"
(57,9 x 61,0 x 12,7 mm)
DC-DC Converters
10 to 50 Watts
Converter Selection Chart
MI-J
Semi-custom modules available, consult factory.
Product Highlights
The MI-J00 family of DC-DC converters is
designed for applications utilizing distributed
power architectures. Based on Vicor’s VI-200 /
VI-J00 family of zero-current switching,
component-level DC-DC converters, the MI-J00
family offers exceptional performance in terms of
power density, efficiency, noise, ease of use, and
reliability.
The MI-J00 family meets all steady-state,
transient and under/overvoltage requirements of
MIL-STD-704D/E/F for both 28 Vdc input
(MI-J2X) and 270 Vdc input (MI-J6X), and the
worst case envelope of MIL-STD-1399A for
155 Vdc input (MI-J5X).
The output voltage can be externally trimmed or
programmed from 50% to 110% of nominal
output. Current limiting, remote sense, and an
inhibit pin all combine to offer a high degree of
protection, versatility, and reliability for power
systems.
Fully encapsulated in Vicor’s industry standard
package, the MI-J00 family meets MIL-STD-810
environmental testing requirements for humidity,
fungus, salt-fog, explosive atmosphere,
acceleration, vibration, and shock.
Input Voltage
Nominal
2
= 28 V
5
= 155 V
6
= 270 V
7
= 165 V
[a]
[b]
[c]
Range
18 – 50 V
[b]
100 – 210 V
125 – 400 V
[c]
100 – 310 V
Transient
[a]
60 V
230 V
475 V
n/a
Notes
28 Vdc input per MIL-STD 704D/E/F
155 Vdc input per MIL-STD-1399A
270 Vdc input per MIL-STD-704D/E/F
Transient voltage for 1 second.
16 V operation at 75% load.
These units rated at 75% load from 125 – 150 Vin: MI-J6Z-xY, MI-J6Y-xY, MI-J60-xY
Output Voltage
Z
= 2.0 V
Y
= 3.3 V
0
= 5.0 V
X
= 5.2 V
W
= 5.5 V
V
= 5.8 V
T
= 6.5 V
R
= 7.5 V
M
= 10 V
1
= 12 V
P
= 13.8 V
2
= 15 V
N
= 18.5 V
3
= 24 V
L
= 28 V
J
= 36 V
K
= 40 V
4
= 48 V
Product Grade Temperatures (°C)
Operating
I
= –40 to +100
M
= –55 to +100
Storage
I
= –55 to +125
M
= –65 to +125
Output Power/Current Vout
≥
5V
A
= 10 W
Z
= 25 W
Y
= 50 W
<5 V
A
= —
Z
=5 A
Y
= 10 A
Packaging Options
Standard:
Slotted baseplate
SlimMod:
Flangeless baseplate, option suffix:
- S
Example: MI - JXX - XX
- S
FinMod:
Finned heat sink, option suffix:
- F1, -F2, -F3
and
- F4
Examples:
MI - JXX - XX
-F1,
0.25" fins, longitudinal
MI - JXX - XX
-F2,
0.50" fins, longitudinal
MI - JXX - XX
-F3,
0.25" fins, transverse
MI - JXX - XX
-F4,
0.50" fins, transverse
Vicor Corp.
Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
MI-200 DC-DC Converters 10 to 50 Watts
Rev. 1.0
Page 1 of 6
Set your site on VICOR at www.vicorpower.com
CONVERTER SPECIFICATIONS
(typical at T
BP
= 25°C, nominal line and 75% load, unless otherwise specified)
INPUT SPECIFICATIONS
Parameter
Inrush charge
Input reflected
ripple current – pp
Min
Typ
60 x 10
10%
-6
Max
100 x 10
-6
Units
Coulombs
I
IN
Test Conditions
Nominal line
Nominal line, full load
120 Hz, nominal line
2400 Hz, nominal line
Input ripple rejection
( )
20+ 20 Log
(
Vin
)
30+ 20 Log Vin
Vout
Vout
dB
dB
2
Watts
No load power dissipation
1.35
OUTPUT CHARACTERISTICS
Parameter
Setpoint accuracy
Load/line regulation
Output temperature drift
Long term drift
Output ripple – pp
1.0
Trim range
[a]
Total remote
sense compensation
Current limit
Short circuit current
[a]
Min
Typ
0.5
0.05
0.2
0.01
0.02
100
Max
1
0.2
0.5
0.02
Units
%V
NOM
%V
NOM
%V
NOM
% / °C
%/1K hours
Test Conditions
LL to HL, 10% to Full Load
LL to HL, No Load to 10%
Over rated temperature
150
1.5
110
mV
%V
NOM
%V
NOM
Volts
Whichever is greater
20 MHz bandwidth
50
0.5
105
105
125
130
%I
NOM
%I
NOM
Automatic restart
10 V, 12 V and 15 V outputs, standard trim range ±10%. Consult factory for wider trim range.
CONTROL PIN SPECIFICATIONS
Parameter
Gate out impedance
Gate in impedance
Gate in high threshold
Gate in low threshold
Gate in low current
0.65
6
Min
Typ
50
1000
6
Max
Units
Ω
Ω
Volts
Volts
mA
Use open collector
Test Conditions
Vicor Corp.
Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
MI-J00 DC-DC Converters 10 to 50 Watts
Rev. 1.0
Page 2 of 6
Set your site on VICOR at www.vicorpower.com
CONVERTER SPECIFICATIONS (cont.)
DIELECTRIC WITHSTAND CHARACTERISTICS
Parameter
Input to output
Output to baseplate
Input to baseplate
Input to output capacitance
Min
3,000
500
1,500
50
75
Typ
Max
Units
V
RMS
V
RMS
V
RMS
pF
Test Conditions
Baseplate earthed
THERMAL CHARACTERISTICS
Parameter
Efficiency
Baseplate to sink
Min
Typ
80 – 90%
0.14
°C/Watt
With thermal pads
Max
Units
Test Conditions
ENVIRONMENTAL – MIL-STD-810D
Parameter
Altitude - method 500.2
Humidity - method 507.2
Acceleration - method 513.3
Vibration - method 514.3
Shock - method 516.3
Min
70,000
88/240
9
20
40
Typ
Max
Units
feet
%/hours
g
g
g
Test Conditions
Procedure II
Procedure I, cycle 1
Procedure II
Procedure I, category 6
Procedure I
RELIABILITY - MIL-HDBK-217F (MI-J2L-MY)
Parameter
25°C Ground Benign: G.B.
50°C Naval Sheltered: N.S.
65°C Airborne Inhabited
Cargo: A.I.C.
Min
Typ
3,732
672
526
Max
Units
1,000 hours
1,000 hours
1,000 hours
Test Conditions
MECHANICAL SPECIFICATIONS
Parameter
Weight
Min
Typ
3.0
(85)
Max
Units
Ounces
(Grams)
Test Conditions
Vicor Corp.
Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
MI-200 DC-DC Converters 10 to 50 Watts
Rev. 1.0
Page 3 of 6
Set your site on VICOR at www.vicorpower.com
CONVERTER SPECIFICATIONS (cont.)
PRODUCT GRADE SPECIFICATIONS
Parameter
Storage temperature
Operating temperature (baseplate)
Power cycling burn-in
Temperature cycled with power off
17°C per minute rate of change
Test data supplied at these temperatures
[a]
Warranty
Environmental compliance
Derating
[a]
I-Grade
-55°C to +125°C
-40°C to +100°C
12 hours, 29 cycles
12 cycles
-65°C to +100°C
-40°C, +80°C
2 years
MIL-STD-810
NAVMAT P-4855-1A
M-Grade
-65°C to +125°C
-55°C to +100°C
96 hours, 213 cycles
12 cycles
-65°C to +100°C
-55°C, +80°C
2 years
MIL-STD-810
NAVMAT P-4855-1A
Test data available for review or download from vicorpower.com
ENVIRONMENTAL QUALIFICATIONS
Parameter
Altitude
MIL-STD-810D, Method 500.2, Procedure II, 40,000 ft., 1000 – 1500 ft./ min. to 70,000 ft., unit functioning
Explosive Atmosphere
MIL-STD-810C, Method 511.1, Procedure I
MIL-STD-810D, Method 514.3, Procedure I, category 6, helicopter, 20 g
Vibration
MIL-STD-810D, Method 514.3 random: 10 – 300 Hz @ 0.02 g
2
/Hz, 2000 Hz @ 0.002 g
2
/ Hz, 3.9 total G rms
3 hrs /axis. Sine: 30 Hz @ 20 g, 60 Hz @ 10 g, 90 Hz @ 6.6 g, 120 Hz @ 5.0 g, 16.0 total G rms, 3 axes
MIL-STD-810E, Method 514.4, Table 514.4-VII, ±6 db/octave, 7.7 G rms, 1hr/axis
MIL-STD-810D, Method 516.3, Procedure I, functional shock, 40 g
MIL-STD-202F, Method 213B, 18 pulses, 60 g, 9 msec
Shock
MIL-STD-202F, Method 213B, 75 g, 11 ms saw tooth shock
MIL-STD-202F, Method 207A, 3 impacts / axis, 1, 3, 5 feet
Acceleration
Humidity
Solder Test
Fungus
Salt-Fog
MIL-STD-810D, Method 513.3, Procedure II Operational test, 9 g for 1 minute along 3 mutually perpendicular axes
MIL-STD-810D, Method 507.2, Procedure I, cycle I, 240 hrs, 88% relative humidity
MIL-STD-202, Method 208, 8 hr. aging
MIL-STD-810C, Method 508.1
MIL-STD-810C, Method 509.1
Qualification
MIL-STD-810D, Method 500.2, Procedure III, explosive decompression (40 K ft.).
Vicor Corp.
Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
MI-J00 DC-DC Converters 10 to 50 Watts
Rev. 1.0
Page 4 of 6
Set your site on VICOR at www.vicorpower.com
MECHANICAL DRAWING
.49
(12,4)
.30±.015
(7,6)±(0,38)
.65
(16,5)
2.28
(57,9)
1.30
(33,0)
Standard
0.080 Dia (2) places
Solder plate
over copper alloy
RoHS
0.080 Dia (2) places
Matte tin over copper
alloy
Pin #
1
4
3
2.10
(53,4)
2
1
9
8
2
3
1.40
1.00 (35,6)
(25,4)
4
5
6
.35± .015
(8,9)±(0,38)
Standard
0.040 (1,0) Dia (7) places
Solder plate
over copper alloy
Product ID
this surface
.22
(5,6) Min.
.30
(7,6) Min.
7
8
Function
+In
Gate In
Gate Out
-In
+Out
+Sense
Trim
–Sense
VI-J00
MI-J00
7
6
5
.70
.40 (17,8)
(10,2)
.15
(3,8)
FULL R
.15
(3,8)
9
–Out
RoHS
0.040 Dia (7) places
Matte tin over copper
alloy
2.40
(61,0)
1.75
(44,4) Max.
1.90
(48,3)
.50
(12,7)
.12
(3,0)
+.030 (0,76)
-.000 (0)
.01
Aluminum Base
Note: For alternate package options refer to the mechanical drawing page of vicorpower.com
Vicor Corp.
Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
MI-200 DC-DC Converters 10 to 50 Watts
Rev. 1.0
Page 5 of 6
Set your site on VICOR at www.vicorpower.com
相关元器件产品Datasheet PDF文档
MI-J2ZIA-F2
1-OUTPUT DC-DC REG PWR SUPPLY MODULE, 2.280 X 2.400 INCH, 0.500 INCH HEIGHT, PLASTIC, MODULE-9
4
VICOR
MI-J2ZIA-F3
1-OUTPUT DC-DC REG PWR SUPPLY MODULE, 2.280 X 2.400 INCH, 0.500 INCH HEIGHT, PLASTIC, MODULE-9
3
VICOR
4
VICOR
MI-J2Z-IA-S
DC-DC Regulated Power Supply Module, 1 Output, 10W, Hybrid,
0
VICOR
MI-J2Z-IJ
10-50 WATTS MILITARY COTS DC/DC CONVERTER
8
POWERBOX
0
XPPOWER