MI-J7L-IA-S
更新时间：2024-09-18 15:42:26
品牌：VICOR
描述：DC-DC Regulated Power Supply Module, 1 Output, 10W, Hybrid,
概述
规格参数
数据手册MI-J7L-IA-S 概述
DC-DC Regulated Power Supply Module, 1 Output, 10W, Hybrid, 电源模块
MI-J7L-IA-S 规格参数
| 是否无铅： | 含铅 | 是否Rohs认证： | 不符合 |
| 生命周期： | Active | Reach Compliance Code： | not_compliant |
| ECCN代码： | EAR99 | 风险等级： | 5.85 |
| 其他特性： | REMOTE SHUTDOWN | 模拟集成电路 - 其他类型： | DC-DC REGULATED POWER SUPPLY MODULE |
| 认证： | CE | 效率（主输出）： | 90% |
| 高度： | 12.7 mm | 最大输入电压： | 310 V |
| 最小输入电压： | 100 V | 标称输入电压： | 165 V |
| JESD-30 代码： | R-PDMA-P9 | JESD-609代码： | e0 |
| 长度： | 57.9 mm | 最大电网调整率： | 0.5% |
| 最大负载调整率： | 0.5% | 功能数量： | 1 |
| 输出次数： | 1 | 端子数量： | 9 |
| 最高工作温度： | 100 °C | 最低工作温度： | -40 °C |
| 最大输出电压： | 30.8 V | 最小输出电压： | 14 V |
| 标称输出电压： | 28 V | 封装主体材料： | PLASTIC/EPOXY |
| 封装形状： | RECTANGULAR | 封装形式： | MICROELECTRONIC ASSEMBLY |
| 峰值回流温度（摄氏度）： | NOT SPECIFIED | 认证状态： | Not Qualified |
| 纹波电压（主输出）： | 0.05304 Vrms | 子类别： | Power Supply Modules |
| 表面贴装： | NO | 技术： | HYBRID |
| 温度等级： | INDUSTRIAL | 端子面层： | TIN LEAD OVER COPPER |
| 端子形式： | PIN/PEG | 端子位置： | DUAL |
| 处于峰值回流温度下的最长时间： | NOT SPECIFIED | 最大总功率输出： | 10 W |
| 微调/可调输出： | YES | 宽度： | 61 mm |
| Base Number Matches： | 1 |
MI-J7L-IA-S 数据手册
通过下载MI-J7L-IA-S数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载DC-DC Converters
MI-J00
10 to 50 Watts
Features & Benefits
Packaging Options
• Inputs:
Standard: Slotted baseplate
28VDC per MIL-STD-704D/E/F
155VDC per MIL-STD-1399A
270VDC per MIL-STD-704D/E/F
SlimMod: Flangeless baseplate, option suffix: - S
Example: MI - JXX - XX - S
• Single output: 2 – 48VDC
• Up to 23W/in3
FinMod: Finned heat sink, option suffix:
- F1, -F2, -F3 and - F4
• MIL-STD-810 environments
• Up to 90% efficiency
• Remote sense
Examples:
MI - JXX - XX -F1, 0.25” fins, longitudinal
MI - JXX - XX -F2, 0.50” fins, longitudinal
MI - JXX - XX -F3, 0.25” fins, transverse
MI - JXX - XX -F4, 0.50” fins, transverse
• Current limit
• ZCS power architecture
• Low noise FM control
Converter Selection Chart
• Size: 2.28” x 2.4” x 0.5”
(57,9 x 61,0 x 12,7mm)
MI-J
Semi-custom modules available, consult factory.
Product Highlights
Input Voltage
The MI-J00 family of DC-DC converters is
designed for applications utilizing distributed
power architectures. Based on Vicor’s VI-200
/ VI-J00 family of zero-current switching,
component-level DC-DC converters, the MI-J00
family offers exceptional performance in terms
of power density, efficiency, noise, ease of use,
and reliability.
Nominal
2 = 28V
Range
Transient [a]
60V
Notes
[b]
18 – 50V
28VDC input per MIL-STD 704D/E/F
155VDC input per MIL-STD-1399A
270VDC input per MIL-STD-704D/E/F
5 = 155V
6 = 270V
7 = 165V
100 – 210V
125 – 400V
100 – 310V
230V
[c]
475V
n/a
The MI-J00 family meets the steady-state input
voltage requirements of MIL-STD-704D/E/F for
the 28VDC (MI-J2X) and 270VDC input (MI-J6X).
The 155VDC input (MI-J5X) meets MIL-STD-1399A.
When used with the MI-IAM input attenuator
module, the 28V or 270V input MI-J00 converter
meets the transient and spike requirements of
MIL-STD-704, MIL STD-1275, and DO-160. Please
refer to the MI-IAM data sheet for details.
[a] Transient voltage for 1 second.
[b] 16V operation at 75% load.
[c] These units rated at 75% load from 125 – 150VIN: MI-J6Z-xY, MI-J6Y-xY, MI-J60-xY
Output Voltage
Product Grade Temperatures (°C)
Operating
Storage
Z = 2.0V
1 = 12V
P = 13.8V
2 = 15V
N = 18.5V
3 = 24V
L = 28V
J = 36V
K = 40V
4 = 48V
I
= –40 to +100
= –55 to +100
I = –55 to +125
M = –65 to +125
Y = 3.3V
0 = 5.0V
X = 5.2V
W = 5.5V
V = 5.8V
T = 6.5V
R = 7.5V
M = 10V
The output voltage can be externally trimmed
or programmed from 50% to 110% of nominal
output. Current limiting, remote sense, and an
inhibit pin all combine to offer a high degree of
protection, versatility, and reliability for
power systems.
M
Output Power/Current VOUT
≥5V
<5V
Fully encapsulated in Vicor’s industry standard
package, the MI-J00 family meets MIL-STD-810
environmental testing requirements for humidity,
fungus, salt-fog, explosive atmosphere,
A = 10W
Z = 25W
Y = 50W
A = —
Z = 5A
Y = 10A
acceleration, vibration, and shock.
MI-J00 DC-DC Converters
Page 1 of 7
Rev 1.4
06/2017
vicorpower.com
800 927.9474
MI-J00
Converter Specifications
(Typical at TBP =25°C, nominal line and 75% load, unless otherwise specified)
Input Specifications
Parameter
Min
Typ
Max
Units
Test Conditions
Inrush charge
60 x10-6
100 x10-6
Coulombs
Nominal line
Input reflected
10%
IIN
Nominal line, full load
ripple current – pp
VIN
VOUT
30+20Log
(
(
)
)
dB
120Hz, nominal line
2400Hz, nominal line
Input ripple rejection
VIN
VOUT
20+20Log
dB
No load power dissipation
Output Characteristics
1.35
2
Watts
Parameter
Min
Typ
0.5
Max
1
Units
%VNOM
%VNOM
%VNOM
% / °C
Test Conditions
Setpoint accuracy
0.05
0.2
0.2
0.5
0.02
LL to HL, 10% to Full Load
LL to HL, No Load to 10%
Over rated temperature
Load/line regulation
Output temperature drift
Long term drift
0.01
0.02
100
%/1K hours
mV
150
1.5
Whichever is greater
20MHz bandwidth
Output ripple – pp
1.0
%VNOM
%VNOM
[a]
Trim range
50
110
Total remote
0.5
Volts
sense compensation
Current limit
105
105
125
130
%INOM
%INOM
Automatic restart
Short circuit current
[a] 10V to 15V outputs, standard trim range 10%. Consult factory for wider trim range.
Note: The permissible load current must never be exceeded during normal, abnormal or test conditions. For additional output related application information,
please refer to output connections on page 5.
Control Pin Specifications
Parameter
Min
Typ
50
Max
Units
Ω
Test Conditions
Gate out impedance
Gate in impedance
Gate in high threshold
Gate in low threshold
Gate in low current
1000
Ω
6
6
Volts
Volts
mA
Use open collector
0.65
MI-J00 DC-DC Converters
Page 2 of 7
Rev 1.4
06/2017
vicorpower.com
800 927.9474
MI-J00
Converter Specifications (Cont.)
(Typical at TBP =25°C, nominal line and 75% load, unless otherwise specified)
Dielectric Withstand Characteristics
Parameter
Min
3,000
500
Typ
Max
Units
VRMS
VRMS
VRMS
pF
Test Conditions
Input to output
Baseplate earthed
Output to baseplate
Input to baseplate
Input to output capacitance
1,500
50
75
Thermal Characteristics
Parameter
Efficiency
Min
Typ
80 – 90%
0.14
Max
Units
Test Conditions
Baseplate to sink
°C/Watt
With thermal pads
Enviornmental – MIL-STD-810D
Parameter
Min
Typ
Max
Units
Test Conditions
Procedure II
Altitude - method 500.2
Humidity - method 507.2
Acceleration - method 513.3
Vibration - method 514.3
Shock - method 516.3
70,000
88/240
9
feet
%/hours
Procedure I, cycle 1
Procedure II
g
g
g
20
Procedure I, category 6
Procedure I
40
Reliability – MIL-HDBK-217F (MI-J2L-MY)
Parameter
Min
Typ
3,732
672
Max
Units
Test Conditions
25°C Ground Benign: G.B.
50°C Naval Sheltered: N.S.
1,000 hours
1,000 hours
65°C Airborne Inhabited
Cargo: A.I.C.
526
1,000 hours
Mechanical Specifications
Parameter
Min
Typ
Max
Units
Test Conditions
3.5
3.7
3.8
Ounces
Grams
Weight
101
107
109
MI-J00 DC-DC Converters
Page 3 of 7
Rev 1.4
06/2017
vicorpower.com
800 927.9474
MI-J00
Converter Specifications (Cont.)
Product Grade Specifications
Parameter
I-Grade
M-Grade
Storage temperature
Operating temperature (baseplate)
Power cycling burn-in
-55°C to +125°C
-40°C to +100°C
12 hours, 29 cycles
-65°C to +125°C
-55°C to +100°C
96 hours, 213 cycles
Temperature cycled with power off
17°C per minute rate of change
12 cycles
12 cycles
-65°C to +100°C
-65°C to +100°C
Test data supplied at these temperatures[a]
-40°C, +80°C
2 years
-55°C, +80°C
2 years
Warranty
Environmental compliance
MIL-STD-810
MIL-STD-810
Derating
NAVMAT P-4855-1A
NAVMAT P-4855-1A
[a] Test data available for review or download from vicorpower.com
Maximum Capacitance, Rated Output Voltage <5V
Rated VOUT (V)
2 to <3
IOUT Rating (A)
CMAX (µF)
1500
IOUT Rating (A)
>10 to 20
CMAX (µF)
5000
≤10
≤10
3 to <5
1000
>10 to 20
5000
Maximum Capacitance, Rated Output Voltage ≥5V
Rated VOUT (V)
5 to <7.5
7.5 to <10
10 to <28
>28
POUT Rating (W)
CMAX (µF)
1000
400
POUT Rating (W)
>50 to 100
CMAX (µF)
1500
700
≤50
≤50
≤50
≤50
>50 to 100
400
>50 to 100
500
150
>50 to 100
250
Enviornmental Qualifications
Parameter
Qualification
MIL-STD-810D, Method 500.2, Procedure III, explosive decompression (40K ft.).
Altitude
MIL-STD-810D, Method 500.2, Procedure II, 40,000ft., 1000 – 1500ft./min. to 70,000ft., unit functioning
MIL-STD-810C, Method 511.1, Procedure I
Explosive Atmosphere
MIL-STD-810D, Method 514.3, Procedure I, category 6, helicopter, 20g
MIL-STD-810D, Method 514.3 random: 10 – 300Hz @ 0.02g2/Hz, 2000Hz @ 0.002g2/Hz, 3.9 total Grms
3 hrs/axis. Sine: 30Hz @ 20g, 60Hz @ 10g, 90Hz @ 6.6g, 120Hz @ 5.0g, 16.0 total Grms, 3 axes
Vibration
Shock
MIL-STD-810E, Method 514.4, Table 514.4-VII, 6db/octave, 7.7Grms, 1hr/axis
MIL-STD-810D, Method 516.3, Procedure I, functional shock, 40g
MIL-STD-202F, Method 213B, 18 pulses, 60g, 9ms
MIL-STD-202F, Method 213B, 75g, 11ms saw tooth shock
MIL-STD-202F, Method 207A, 3 impacts / axis, 1, 3, 5 feet
MIL-STD-810D, Method 513.3, Procedure II Operational test, 9g for 1 minute along 3 mutually perpendicular axes
MIL-STD-810D, Method 507.2, Procedure I, cycle I, 240hrs, 88% relative humidity
MIL-STD-202, Method 208, 8hr. aging
Acceleration
Humidity
Solder Test
Fungus
MIL-STD-810C, Method 508.1
Salt-Fog
MIL-STD-810C, Method 509.1
MI-J00 DC-DC Converters
Page 4 of 7
Rev 1.4
06/2017
vicorpower.com
800 927.9474
MI-J00
Basic Module Operation
C2a
C2b
C1a
C1b
F1
C3
+IN
–IN
ZeSrwoitCcuhrinregnt+OUT
Converter
–OUT
400
C3 (µF) =
VIN Minimum
Figure 1 — Basic module operation requires fusing, grounding, bypassing capacitors.* See Design Guide & Applications Manual.
Output Connections and Considerations
The permissible load current[e] must never be exceeded during
normal, abnormal or test conditions. Converters subject to
dynamic loading exceeding 25% of rated current must be
Storage
Vicor products, when not installed in customer units, should
be stored in ESD safe packaging in accordance with
ANSI/ESD S20.20, “Protection of Electrical and Electronic
reviewed by Vicor Applications Engineering to ensure that the
Parts, Assemblies and Equipment” and should be maintained
converter will operate properly.
in a temperature controlled factory/warehouse environment
Under dynamic load, light load, or no load conditions, the
converter may emit audible noise. Converters that utilize remote
sense may require compensation circuitry to offset the phase
lag caused by the external output leads and load impedance.
Remote Sense leads must be protected for conditions such as
lead reversal, noise pickup, open circuit, or excessive output lead
resistance between the sense point and the converters output
terminals. For applications that may draw more than the rated
current, a fast acting electronic circuit breaker must be utilized
to protect the converter. Under no circumstance should the
rated current be exceeded. Utilizing or testing of current limit or
short circuit current will damage the converter. Ensure that the
total output capacitance connected to the converter does not
exceed the limits on Page 4.
not exposed to outside elements controlled between the
temperature ranges of 15ºC and 38ºC. Humidity shall not be
condensing, no minimum humidity when stored in an ESD
compliant package.
Nominal Power Rating
[e] Permissible load current:
Nominal VOUT
MI-J00 DC-DC Converters
Page 5 of 7
Rev 1.4
06/2017
vicorpower.com
800 927.9474
MI-J00
Mechanical Drawing
2.28
(57,9)
Standard
1.30
.49
0.080 Dia (2) places
(33,0)
(12,4)
.65
Solder plate
(16,5)
over copper alloy
.30±.015
(7,6)±(0,38)
Pin #
Function
+In
Gate In
Gate Out
-In
+Out
+Sense
Trim
–Sense
–Out
1
2
3
4
5
6
7
8
4
3
9
8
7
6
2.10
1.40
MI-J00
(53,4)
(35,6)
1.00
.70
(17,8)
(25,4)
2
1
.40
(10,2)
5
.35± .015
(8,9)±(0,38)
9
RoHS
FULL R
.15
0.040 (1,0) Dia (7) places
Solder plate
(3,8)
.15
(3,8)
over copper alloy
2.40
Product ID
this surface
(61,0)
1.90
(48,3)
1.75
(44,4) Max.
.30
(7,6) Min.
.22
(5,6) Min.
+.030 (0,76)
.50
-.000 (0)
(12,7)
.01
.12
(3,0)
Aluminum Base
Note: For alternate package options refer to the mechanical drawing page of vicorpower.com
MI-J00 DC-DC Converters
Page 6 of 7
Rev 1.4
06/2017
vicorpower.com
800 927.9474
MI-J00
Vicor’s comprehensive line of power solutions includes high density AC-DC and DC-DC modules and
accessory components, fully configurable AC-DC and DC-DC power supplies, and complete custom
power systems.
Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its use. Vicor
makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication. Vicor reserves
the right to make changes to any products, specifications, and product descriptions at any time without notice. Information published by
Vicor has been checked and is believed to be accurate at the time it was printed; however, Vicor assumes no responsibility for inaccuracies.
Testing and other quality controls are used to the extent Vicor deems necessary to support Vicor’s product warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
Specifications are subject to change without notice.
Visit http://www.vicorpower.com/vi-200_vi-j00 for the latest product information.
Vicor’s Standard Terms and Conditions and Product Warranty
All sales are subject to Vicor’s Standard Terms and Conditions of Sale, and Product Warranty which are available on Vicor’s webpage
(http://www.vicorpower.com/termsconditionswarranty) or upon request.
Life Support Policy
VICOR’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF VICOR CORPORATION. As used
herein, life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and
whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to
result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform
can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. Per Vicor Terms
and Conditions of Sale, the user of Vicor products and components in life support applications assumes all risks of such use and indemnifies
Vicor against all liability and damages.
Intellectual Property Notice
Vicor and its subsidiaries own Intellectual Property (including issued U.S. and Foreign Patents and pending patent applications) relating to the
products described in this data sheet. No license, whether express, implied, or arising by estoppel or otherwise, to any intellectual property
rights is granted by this document. Interested parties should contact Vicor’s Intellectual Property Department.
Vicor Corporation
25 Frontage Road
Andover, MA, USA 01810
Tel: 800-735-6200
Fax: 978-475-6715
email
Customer Service: custserv@vicorpower.com
Technical Support: apps@vicorpower.com
MI-J00 DC-DC Converters
Page 7 of 7
Rev 1.4
06/2017
vicorpower.com
800 927.9474
MI-J7L-IA-S 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| MI-J7L-IY | VICOR | Military DC-DC Converters 10 to 50W | 获取价格 |
|
| MI-J7L-IY | POWERBOX | 10-50 WATTS MILITARY COTS DC/DC CONVERTER | 获取价格 |
|
| MI-J7L-IY-F1 | VICOR | CONVERT DC/DC 165VIN 28VOUT 50W | 获取价格 |
|
| MI-J7L-IY-F2 | VICOR | CONVERT DC/DC 165VIN 28VOUT 50W | 获取价格 |
|
| MI-J7L-IY-F3 | VICOR | 暂无描述 | 获取价格 |
|
| MI-J7L-IY-F4 | VICOR | DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid, | 获取价格 |
|
| MI-J7L-IY-S | VICOR | CONVERT DC/DC 165VIN 28VOUT 50W | 获取价格 |
|
| MI-J7L-IZ | VICOR | Military DC-DC Converters 10 to 50W | 获取价格 |
|
| MI-J7L-IZ | POWERBOX | 10-50 WATTS MILITARY COTS DC/DC CONVERTER | 获取价格 |
|
| MI-J7L-IZ-F1 | VICOR | CONVERT DC/DC 165VIN 28VOUT 25W | 获取价格 |
|
MI-J7L-IA-S 相关文章
Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
- 2024-09-20
- 5
Bourns 精密环境传感器产品选型手册(英文版)
- 2024-09-20
- 8
Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
- 2024-09-20
- 8
Bourns GMOV 混合过压保护组件产品选型手册(英文版)
- 2024-09-20
- 6
