MI-J7YMY [VICOR]
DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid, 2.280 X 2.400 INCH, 0.500 INCH HEIGHT, PLASTIC, MODULE-9;型号: | MI-J7YMY |
厂家: | VICOR CORPORATION |
描述: | DC-DC Regulated Power Supply Module, 1 Output, 50W, Hybrid, 2.280 X 2.400 INCH, 0.500 INCH HEIGHT, PLASTIC, MODULE-9 |
文件: | 总6页 (文件大小:180K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Data Sheet
MI-J00
Features
DC-DC Converters
10 to 50 Watts
• Inputs:
28 Vdc per MIL-STD-704D/E/F
155 Vdc per MIL-STD-1399A
270 Vdc per MIL-STD-704D/E/F
• Single output: 2 – 48 Vdc
• Up to 23 W/in3
• MIL-STD-810 environments
• Up to 90% efficiency
• Remote sense
• Current limit
• ZCS power architecture
• Low noise FM control
• Size: 2.28" x 2.4" x 0.5"
(57,9 x 61,0 x 12,7 mm)
Converter Selection Chart
MI-J
Semi-custom modules available, consult factory.
Product Highlights
The MI-J00 family of DC-DC converters is
designed for applications utilizing distributed
power architectures. Based on Vicor’s VI-200 /
VI-J00 family of zero-current switching,
component-level DC-DC converters, the MI-J00
family offers exceptional performance in terms of
power density, efficiency, noise, ease of use, and
reliability.
Input Voltage
Nominal
2 = 28 V
5 = 155 V
6 = 270 V
7 = 165 V
Range
Transient [a]
60 V
Notes
18 – 50 V [b]
100 – 210 V
125 – 400 V [c]
100 – 310 V
28 Vdc input per MIL-STD 704D/E/F
155 Vdc input per MIL-STD-1399A
270 Vdc input per MIL-STD-704D/E/F
230 V
475 V
n/a
The MI-J00 family meets all steady-state,
transient andunder/overvoltage requirements of
MIL-STD-704D/E/F for both 28 Vdc input
(MI-J2X) and 270 Vdc input (MI-J6X), and the
worst case envelope of MIL-STD-1399A for
155 Vdc input (MI-J5X).
[a]
Transient voltage for 1 second.
16 V operation at 75% load.
These units rated at 75% load from 125 – 150 Vin: MI-J6Z-xY, MI-J6Y-xY, MI-J60-xY
[b]
[c]
Output Voltage
Product Grade Temperatures (°C)
The output voltage can be externally trimmed or
programmed from 50% to 110% of nominal
output. Current limiting, remote sense, and an
inhibit pin all combine to offer a high degree of
protection, versatility, and reliability for power
systems.
Operating
Storage
Z = 2.0 V
Y = 3.3 V
0 = 5.0 V
X = 5.2 V
W = 5.5 V
V = 5.8 V
T = 6.5 V
R = 7.5 V
M = 10 V
1 = 12 V
I = –40 to +100
M = –55 to +100
I = –55 to +125
M = –65 to +125
P = 13.8 V
2 = 15 V
N = 18.5 V
3 = 24 V
L = 28 V
J = 36 V
K = 40 V
4 = 48 V
Fully encapsulated in Vicor’s industry standard
package, the MI-J00 family meets MIL-STD-810
environmental testing requirements for humidity,
fungus, salt-fog, explosive atmosphere,
Output Power/Current Vout
≥ 5 V
<5 V
A = 10 W
Z = 25 W
Y = 50 W
A = —
Z = 5 A
Y = 10 A
acceleration, vibration, and shock.
Packaging Options
Standard: Slotted baseplate
SlimMod: Flangeless baseplate, option suffix: - S
Example: MI - JXX - XX - S
FinMod: Finned heat sink, option suffix:
- F1, -F2, -F3 and - F4
Examples:
MI - JXX - XX -F1, 0.25" fins, longitudinal
MI - JXX - XX -F2, 0.50" fins, longitudinal
MI - JXX - XX -F3, 0.25" fins, transverse
MI - JXX - XX -F4, 0.50" fins, transverse
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
MI-200 DC-DC Converters 10 to 50 Watts
Rev. 1.0
Page 1 of 6
Set your site on VICOR at www.vicorpower.com
CONVERTER SPECIFICATIONS
(typical at T = 25°C, nominal line and 75% load, unless otherwise specified)
BP
INPUT SPECIFICATIONS
Parameter
Min
Typ
Max
Units
Test Conditions
Inrush charge
60 x10-6
100 x 10-6
Coulombs
Nominal line
Input reflected
ripple current – pp
10%
IIN
Nominal line, full load
Vin
30+20Log
(
(
)
)
dB
120 Hz, nominal line
2400 Hz, nominal line
Vout
Input ripple rejection
Vin
Vout
20+20Log
dB
No load power dissipation
1.35
2
Watts
OUTPUT CHARACTERISTICS
Parameter
Min
Typ
0.5
Max
1
Units
%VNOM
%VNOM
%VNOM
% / °C
Test Conditions
Setpoint accuracy
0.05
0.2
0.2
0.5
0.02
LL to HL, 10% to Full Load
LL to HL, No Load to 10%
Over rated temperature
Load/line regulation
Output temperature drift
Long term drift
0.01
0.02
100
%/1K hours
mV
150
1.5
Whichever is greater
20 MHz bandwidth
Output ripple – pp
1.0
%VNOM
%VNOM
Trim range[a]
50
110
Total remote
sense compensation
0.5
Volts
Current limit
105
105
125
130
%INOM
%INOM
Automatic restart
Short circuit current
[a]
10 V, 12 V and 15 V outputs, standard trim range 10%. Consult factory for wider trim range.
CONTROL PIN SPECIFICATIONS
Parameter
Min
Typ
50
Max
Units
Ω
Test Conditions
Gate out impedance
Gate in impedance
Gate in high threshold
Gate in low threshold
Gate in low current
1000
Ω
6
6
Volts
Volts
mA
Use open collector
0.65
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
MI-J00 DC-DC Converters 10 to 50 Watts
Rev. 1.0
Page 2 of 6
Set your site on VICOR at www.vicorpower.com
CONVERTER SPECIFICATIONS (cont.)
DIELECTRIC WITHSTAND CHARACTERISTICS
Parameter
Min
3,000
500
Typ
Max
Units
VRMS
VRMS
VRMS
pF
Test Conditions
Input to output
Baseplate earthed
Output to baseplate
Input to baseplate
Input to output capacitance
1,500
50
75
THERMAL CHARACTERISTICS
Parameter
Min
Typ
80 – 90%
0.14
Max
Units
Test Conditions
Efficiency
Baseplate to sink
°C/Watt
With thermal pads
ENVIRONMENTAL – MIL-STD-810D
Parameter
Min
70,000
88/240
9
Typ
Max
Units
Test Conditions
Procedure II
Altitude - method 500.2
Humidity - method 507.2
Acceleration - method 513.3
Vibration - method 514.3
Shock - method 516.3
feet
%/hours
Procedure I, cycle 1
Procedure II
g
g
g
20
Procedure I, category 6
Procedure I
40
RELIABILITY - MIL-HDBK-217F (MI-J2L-MY)
Parameter
Min
Typ
3,732
672
Max
Units
Test Conditions
25°C Ground Benign: G.B.
50°C Naval Sheltered: N.S.
1,000 hours
1,000 hours
65°C Airborne Inhabited
Cargo: A.I.C.
526
1,000 hours
MECHANICAL SPECIFICATIONS
Parameter Min
Weight
Typ
Max
Units
Test Conditions
3.0
(85)
Ounces
(Grams)
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
MI-200 DC-DC Converters 10 to 50 Watts
Rev. 1.0
Page 3 of 6
Set your site on VICOR at www.vicorpower.com
CONVERTER SPECIFICATIONS (cont.)
PRODUCT GRADE SPECIFICATIONS
Parameter
I-Grade
M-Grade
Storage temperature
Operating temperature (baseplate)
Power cycling burn-in
-55°C to +125°C
-40°C to +100°C
12 hours, 29 cycles
-65°C to +125°C
-55°C to +100°C
96 hours, 213 cycles
Temperature cycled with power off
17°C per minute rate of change
12 cycles
-65°C to +100°C
12 cycles
-65°C to +100°C
Test data supplied at these temperatures[a]
-40°C, +80°C
2 years
-55°C, +80°C
2 years
Warranty
Environmental compliance
Derating
MIL-STD-810
NAVMAT P-4855-1A
MIL-STD-810
NAVMAT P-4855-1A
[a] Test data available for review or download from vicorpower.com
ENVIRONMENTAL QUALIFICATIONS
Parameter
Qualification
MIL-STD-810D, Method 500.2, Procedure III, explosive decompression (40 K ft.).
Altitude
MIL-STD-810D, Method 500.2, Procedure II, 40,000 ft., 1000 – 1500 ft./min. to 70,000 ft., unit functioning
MIL-STD-810C, Method 511.1, Procedure I
Explosive Atmosphere
MIL-STD-810D, Method 514.3, Procedure I, category 6, helicopter, 20 g
MIL-STD-810D, Method 514.3 random: 10 – 300 Hz @ 0.02 g2/Hz, 2000 Hz @ 0.002 g2/Hz, 3.9 total G rms
3 hrs/axis. Sine: 30 Hz @ 20 g, 60 Hz @ 10 g, 90 Hz @ 6.6 g, 120 Hz @ 5.0 g, 16.0 total G rms, 3 axes
Vibration
Shock
MIL-STD-810E, Method 514.4, Table 514.4-VII, 6 db/octave, 7.7 G rms, 1hr/axis
MIL-STD-810D, Method 516.3, Procedure I, functional shock, 40 g
MIL-STD-202F, Method 213B, 18 pulses, 60 g, 9 msec
MIL-STD-202F, Method 213B, 75 g, 11 ms saw tooth shock
MIL-STD-202F, Method 207A, 3 impacts / axis, 1, 3, 5 feet
MIL-STD-810D, Method 513.3, Procedure II Operational test, 9 g for 1 minute along 3 mutually perpendicular axes
MIL-STD-810D, Method 507.2, Procedure I, cycle I, 240 hrs, 88% relative humidity
MIL-STD-202, Method 208, 8 hr. aging
Acceleration
Humidity
Solder Test
Fungus
MIL-STD-810C, Method 508.1
Salt-Fog
MIL-STD-810C, Method 509.1
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
MI-J00 DC-DC Converters 10 to 50 Watts
Rev. 1.0
Page 4 of 6
Set your site on VICOR at www.vicorpower.com
MECHANICAL DRAWING
2.28
(57,9)
1.30
(33,0)
.49
(12,4)
0.080 Dia (2) places
Solder plate
.65
(16,5)
over copper alloy
.30±.015
(7,6)±(0,38)
Pin #
Function
+In
1
2
3
4
5
6
7
8
4
3
9
Gate In
Gate Out
-In
8
7
6
2.10
(53,4)
1.40
MI-J00
(35,6)
1.00
+Out
.70
(17,8)
(25,4)
2
1
.40
(10,2)
+Sense
Trim
5
.35± .015
(8,9)±(0,38)
–Sense
–Out
9
FULL R
.15
(3,8)
0.040 (1,0) Dia (7) places
Solder plate
.15
(3,8)
over copper alloy
2.40
(61,0)
Product ID
this surface
1.90
(48,3)
1.75
(44,4) Max.
.30
(7,6) Min.
.22
(5,6) Min.
+.030 (0,76)
-.000 (0)
.50
(12,7)
.01
.12
(3,0)
Aluminum Base
Note: For alternate package options refer to the mechanical drawing page of vicorpower.com
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
MI-200 DC-DC Converters 10 to 50 Watts
Rev. 1.0
Page 5 of 6
Set your site on VICOR at www.vicorpower.com
Warranty
Vicor products are guaranteed for two years from date of shipment against defects in material or workmanship when in normal
use and service. This warranty does not extend to products subjected to misuse, accident, or improper application or maintenance.
Vicor shall not be liable for collateral or consequential damage. This warranty is extended to the original purchaser only.
EXCEPT FOR THE FOREGOING EXPRESS WARRANTY, VICOR MAKES NO WARRANTY, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.
Vicor will repair or replace defective products in accordance with its own best judgement. For service under this warranty, the
buyer must contact Vicor to obtain a Return Material Authorization (RMA) number and shipping instructions. Products returned
without prior authorization will be returned to the buyer. The buyer will pay all charges incurred in returning the product to the
factory. Vicor will pay all reshipment charges if the product was defective within the terms of this warranty.
Information published by Vicor has been carefully checked and is believed to be accurate; however, no responsibility is assumed
for inaccuracies. Vicor reserves the right to make changes to any products without further notice to improve reliability, function,
or design. Vicor does not assume any liability arising out of the application or use of any product or circuit; neither does it con-
vey any license under its patent rights nor the rights of others. Vicor general policy does not recommend the use of its compo-
nents in life support applications wherein a failure or malfunction may directly threaten life or injury. Per Vicor Terms and
Conditions of Sale, the user of Vicor components in life support applications assumes all risks of such use and indemnifies Vicor
against all damages.
Vicor s comprehensive line of power solutions includes high density AC-DC
and DC-DC modules and accessory components, fully configurable AC-DC
and DC-DC power supplies, and complete custom power systems.
Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its
use. Vicor components are not designed to be used in applications, such as life support systems, wherein a failure or malfunc-
tion could result in injury or death. All sales are subject to Vicor’s Terms and Conditions of Sale, which are available upon
request.
Specifications are subject to change without notice.
Intellectual Property Notice
Vicor and its subsidiaries own Intellectual Property (including issued U.S. and Foreign Patents and pending patent
applications) relating to the products described in this data sheet. Interested parties should contact Vicor's Intellectual
Property Department.
Vicor Corporation
25 Frontage Road
Andover, MA, USA 01810
Tel: 800-735-6200
Fax: 978-475-6715
email
Customer Service: custserv@vicorpower.com
Technical Support: apps@vicorpower.com
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
MI-J00 DC-DC Converters 10 to 50 Watts
Rev. 1.0
3/07
Set your site on VICOR at www.vicorpower.com
相关型号:
MI-J7YMY-F1
1-OUTPUT DC-DC REG PWR SUPPLY MODULE, 2.280 X 2.400 INCH, 0.500 INCH HEIGHT, PLASTIC, MODULE-9
VICOR
MI-J7YMY-F2
1-OUTPUT DC-DC REG PWR SUPPLY MODULE, 2.280 X 2.400 INCH, 0.500 INCH HEIGHT, PLASTIC, MODULE-9
VICOR
MI-J7YMY-F3
1-OUTPUT DC-DC REG PWR SUPPLY MODULE, 2.280 X 2.400 INCH, 0.500 INCH HEIGHT, PLASTIC, MODULE-9
VICOR
MI-J7YMZ
DC-DC Regulated Power Supply Module, 1 Output, 25W, Hybrid, 2.280 X 2.400 INCH, 0.500 INCH HEIGHT, PLASTIC, MODULE-9
VICOR
MI-J7YMZ-F1
1-OUTPUT DC-DC REG PWR SUPPLY MODULE, 2.280 X 2.400 INCH, 0.500 INCH HEIGHT, PLASTIC, MODULE-9
VICOR
MI-J7YMZ-F3
1-OUTPUT DC-DC REG PWR SUPPLY MODULE, 2.280 X 2.400 INCH, 0.500 INCH HEIGHT, PLASTIC, MODULE-9
VICOR
MI-J7YMZ-F4
1-OUTPUT DC-DC REG PWR SUPPLY MODULE, 2.280 X 2.400 INCH, 0.500 INCH HEIGHT, PLASTIC, MODULE-9
VICOR
MI-J7YMZ-S
1-OUTPUT DC-DC REG PWR SUPPLY MODULE, 2.280 X 2.400 INCH, 0.500 INCH HEIGHT, PLASTIC, MODULE-9
VICOR
©2020 ICPDF网 联系我们和版权申明