MI-NC2L-IS-CC [VICOR]
DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid, PACKAGE-10;
| 型号： | MI-NC2L-IS-CC |
| 厂家： | 
VICOR CORPORATION |
| 描述： | DC-DC Regulated Power Supply Module, 1 Output, 300W, Hybrid, PACKAGE-10 |
| 文件： | 总6页 (文件大小：582K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MI-ComPAC™
DC-DC Switchers
50 – 300 Watts; 1 – 3 Outputs
Features & Benefits
Configuration Chart
Number of
Modules
• Inputs 28 and 270VDC
Configuration
Single Output
Output Power
Dimensions
• Transient protection: 28VDC designed
to meet MIL-STD-704A-F,
8.6 x 2.5 x 0.99in
[218,4 x 63,5 x 25,2mm]
–
–
–
MI-LC
50 – 100W
150 – 200W
300W
1
2
3
MIL-STD-1275A/B/D and DO-160E
8.6 x 4.9 x 0.99in
[218,4 x 124,5 x 25,2mm]
• One, two or three outputs
• Outputs: 2 – 48VDC
• Up to 5W/in3
MI-MC
8.6 x 7.3 x 0.99in
[218,4 x 185,4 x 25,2mm]
MI-NC
Dual Output
MI-PC
• High efficiency
8.6 x 4.9 x 0.99in
[218,4 x 124,5 x 25,2mm]
–
–
100 – 200W
200 – 300W
2
3
• Remote sense
8.6 x 7.3 x 0.99in
[218,4 x 185,4 x 25,2mm]
MI-QC
• ZCS power architecture
• Low noise FM control
• MIL-STD-461C/D/E EMI compliance
Triple Output
8.6 x 7.3 x 0.99in
[218,4 x 185,4 x 25,2mm]
–
MI-RC
150 – 300W
3
Input Voltage
Output Voltage
Product Description
Z = 2V[b]
1 = 12V
P = 13.8V
2 = 15V
N = 18.5V
3 = 24V
L = 28V
J = 36V
Input Range Brownout Transient
The MI-ComPAC is a complete single,
dual, or triple output DC-DC power supply
that delivers up to 300W from inputs
Y = 3.3V[b]
0 = 5V[b]
X = 5.2V
W = 5.5V
V = 5.8V
T = 6.5V[c]
R = 7.5V[c]
M = 10V
Nominal
Full Power Voltage[a]
(1s)
2 = 28V
18 – 50V
16
60
of 28 or 270VDC
.
6 = 270V
125 – 400V
N/A
475
The MI-ComPAC meets the conducted
emissions and conducted susceptibility
specifications of MIL-STD-461C/D/E and
designed to meet the input transient,
surge, and spike protection to the
most severe levels of MIL-STD-1275,
MIL-STD-704 and DO-160E.
Product Grade Case Temps. ºC
K = 40V
4 = 48V
Grade
I =
Operating
–40 to +85
–55 to +85
Storage
–55 to +100
–65 to +100
M =
Output Power / Current
Over/undervoltage lockout provides an
additional safeguard against potentially
damaging line conditions. The MI-ComPAC
also features a master disable.
V
OUT ≥ 5V
VOUT < 5V
V = 30A
U = —
Output Power / Current
V = 150W
U = 200W
S = 300W
VOUT ≥ 5V
VOUT < 5V
Y = 10A
X = 15A
W = 20A
V = 30A
Y = 50W
X = 75W
W = 100W
V = —
S = 60A
Packaging Options
Output Power / Current
Conduction Cooled Models Available.
Add “–CC” to the end of the part number.
(Consult factory for details.)
VOUT ≥ 5V
VOUT < 5V
S = —
S = 300W
P = —
P = 90A
Extended heat sink available add “–H1” to
end of part number.
[a] Brownout voltage for output power de-rated to 75% of maximum
[b] These units rated for 75% load from 125 to 150V: “V” power for “Z & Y” voltages,
“W power for “0” voltages
[c] 75W maximum module power for 28V input voltage
MI-ComPAC™ DC-DC
Page 1 of 6
Rev 1.5
02/2015
MI-ComPAC™ DC-DC Switchers
MI-ComPAC Specifications
Typical at TBP = 25°C, nominal line and 75% load, unless otherwise specified.
Input Specifications
Parameter
Min
Typ
Max
Unit
Notes
28VDC Input Modules
Steady-State Input
Low-Line Lockout
Input Spike Limit
18
28
50
17.5
+250
100
80
VDC
VDC
VDC
VDC
VDC
VDC
A
Automatic recovery
–250
70µs, 15mJ per MIL-STD-1275A/B/D
50ms, 0.5Ω per MIL-STD-1275A/B/D
100ms per DO-160E, Section 16, Power Input, Category Z
100ms automatic recovery
Input Surge Limit
Overvoltage Shut Down
Recommended Fuse
270VDC Input Modules
Steady-State Input
50
10[d]
F03A type
125
270
400
125
VDC
VDC
VDC
VDC
VDC
VDC
A
Low-Line Lockout
Automatic recovery
10µs, 50Ω
+800
+600
500
Input Spike Limit
–600
–250
400
100µs, 15mJ
Input Surge Limit
Overvoltage Shut Down
Recommended Fuse
All Models
100ms, 0.5Ω
100µs automatic recovery
F03A type
2[d]
No Load Power Dissipation
1.5[d]
110
2[d]
W
Master Disable Input Current[e]
(Absolute Maximum, 20mA)
4
mA
Sink; disables all outputs
Steady state IIN, 10ms
Inrush Current
125
%, IIN
[d] Per internal module configuration.
[e] Multiply minimum x2 for 2-ups and x3 for 3-ups
Output Specifications
Parameter
Min
Typ
0.5
Max
1.0
Unit
%VNOM
%VNOM
%VNOM
% / ºC
%VNOM
mV
Notes
Set Point Accuracy
0.2
0.5
LL to HL, NL to 10%
LL to HL, 10% to FL
Load / Line Regulation
0.05
0.01
1.0
0.2
Output Temperature Drift
Output Noise, Peak-to-Peak
0.02
1.5
Whichever is greater; 20MHz BW
100
150
110
Output Voltage Trimming[f]
Remote Sense Compensation
OVP Set Point
50
0.5
115
105
20
%VNOM
VDC
125
135
125
130
%VNOM
%INOM
%INOM
Latching
Current Limit
Auto restart
Short-Circuit Current[g]
[f] 10, 12 and 15V outputs, standard trim range 10%. Consult factory for wider trim range.
[g] Output ranges of 5V or less incorporate foldback current limiting, outputs of 10V and above incorporate straight-line current limiting.
MI-ComPAC™ DC-DC
Page 2 of 6
Rev 1.5
02/2015
MI-ComPAC™ DC-DC Switchers
MI-ComPAC Specifications (Cont.)
Typical at TBP = 25°C, nominal line and 75% load, unless otherwise specified.
Thermal Characteristics
Parameter
Min
Typ
Max
Unit
%
Notes
Efficiency
81
Operating Temperature, Case
Storage Temperature
Shut-Down Temperature
+85
+100
+105
ºC
See product grade
ºC
See product grade
+90
+95
ºC
Cool and recycle power to restart
Isolation Characteristics
Parameter
Min
Typ
Max
Unit
Notes
Input to Output
Input to Case
4242
VRMS
1 minute
28VDC Input
2121
2500
500
VRMS
VRMS
VRMS
1 minute
1 minute
1 minute
270VDC Input
Output to Case
Mechanical Specifications
Parameter
Weight
1-Up
Min
Typ
Max
Unit
Notes
1.2 [544]
2.4 [1088]
3.6 [1633]
lbs [g]
lbs [g]
lbs [g]
2-Up
3-Up
EMC CHARACTERISTICS; MIL-STD-461C/D/E
Parameter
Notes
Input Power Leads
CE01, CE03, CE07
CE101, CE102
MIL-STD-461C — 1-up
MIL-STD-461D — 1-up
Conducted Emissions
CE101
MIL-STD-461E — 2-up & 3-up
MIL-STD-461C — 1-up
CS01, CS02, CS06
CS101, CS114, CS116
CS101, CS114, CS116
Conducted Susceptibility
MIL-STD-461D — 1-up
MIL-STD-461E — 2-up & 3-up
MI-ComPAC™ DC-DC
Page 3 of 6
Rev 1.5
02/2015
MI-ComPAC™ DC-DC Switchers
MI-ComPAC Specifications (Cont.)
Thermal Considerations
Standard Units
2-Up
With Optional Heat Sink[h]
Parameter
1-Up
3-Up
1-Up
2-Up
3-Up
Thermal Impedance — Case-to-Air (ºC / W)
Free Air (Horizontal)
3.6
1.7
1.4
2.1
1.3
1.0
Forced Convection Through Heat-Sink Fins
50LFM
2.7
2.3
1.6
1.2
0.9
0.8
1.4
1.3
1.0
0.7
0.5
0.4
1.3
1.1
0.8
0.6
0.5
0.4
1.5
1.2
0.7
0.4
0.3
0.2
1.1
0.9
0.5
0.3
0.2
0.2
0.9
0.7
0.4
0.3
0.2
0.2
100LFM
250LFM
500LFM
750LFM
1000LFM
• Thermal impedance, chassis-to-air, is provided for 1-up, 2-up and 3-up MI-ComPAC package configurations as a function of airflow.
• Case temperature = (total power dissipated • thermal impedance) + ambient temperature.
• Watts dissipated per output = (output power ÷ efficiency) – output power.
[h] To order optional heat sink add –H1 to part number.
20mA Max
Disable Current
Disable
+
• 4mA DC minimum for 1-up ComPAC
• 8mA DC minimum for 2-up ComPAC
• 12mA DC minimum for 3-up ComPAC
V
DIS+
DIS–
Figure 1 — Disable circuit; The MI-ComPAC incorporates an optically isolated master disable input which will shut down the MI-ComPAC
when a current is driven through the disable terminals
28VDC Input
270VDC Input
600
500
400
300
200
100
0
-100
-200
-300
-400
-500
-600
Ratings Exceeded
Ratings Exceeded
800
600
400
200
0
200
400
600
500V
400V
OVP
OVP
50V
-6
10
-5
10
-4
10
-3
-2
10
-1
10
0
-6
10
-5
10
-4
10
-3
-2
10
-1
10
0
10
10
1s
10
10
1ms
10ms
100ms
1ms
10ms
100ms
1s
TIME (SECONDS)
TIME (SECONDS)
Figure 2 — Long term safe operating area curves; 1% duty cycle maximum, for short duration transient capability refer to specifications
MI-ComPAC™ DC-DC
Page 4 of 6
Rev 1.5
02/2015
MI-ComPAC™ DC-DC Switchers
Mechanical Drawings
All Models
INPUTS
Measure case temperature on this surface.
1
Ground
–Input
2
0.99
0.5
3
4
5
+Input
(25,15)
(12,57)
Standard Heat sink
Disable–
Disable+
8.63.025
(219,2
,64)
0.41
(10,4)
OUTPUTS
+Output
+Sense
Trim
A
1.37
(34,80)
1.12
B
C
D
E
0.5
Optional heat sink (H1)
(28,4)
(12,57)
–Sense
–Output
9.25 .120
(235,03,05)
LC Series
0.18
(4,6)
6.00
2.76
(152,4)
(70,1)
0
0.91
(23,1)
5
3
.41 (10,41)
.75 (19,05)
L
0.19
(4,8)
4
2
B
2.156
1.14 (28,96)
1.53 (38,86)
2.54
(64,5)
A
(54,76)
0.20
D
(5,1)
2.11 (53,59)
1
C
.25 ꢀYꢁ
ø.150 .005 ꢀTHR 4 ꢁPLACE
(ø3,81 0,13)
0.20
(5,1)
#8-32 EꢀRD
2 ꢁPLACE
MC, PC Series
6.00
2.76
(70,1)
0.18
(4,6)
(152,4)
0
.41 (10,41)
.75 (19,05)
1.14 (28,96)
1.53 (38,86)
L
B
L
B
0.19
(4,8)
2.281
A
3.04
(77,2)
(57,94)
3.58
D
C
L
B
A
D
(90,9)
2.11 (53,59)
4.562
4.96
(126,0)
5
3
1
(115,87)
2.83 (71,88)
3.17 (80,52)
3.56 (90,42)
3.95 (100,33)
4
A
2
D
C
0.20
(5,1)
4.53 (115,06)
C
.25 ꢀYꢁ
#8-32 EꢀRD
4 ꢁPLACE
ø.150 .005 ꢀTHR 5 ꢁPLACE
(ø3,81 0,13)
#10-32 EꢀRD
2 ꢁPLACE
NC, QC, RC Series
0.18
(4,6)
2.76
6.00
#8-32 EꢀRD
(70,1)
(152,4)
2 ꢁPLACE
0
.41 (10,41)
L
B
L
L
B
.75 (19,05)
1.14 (28,96)
1.53 (38,86)
0.19
(4,8)
2.288
A
(58,12)
D
C
L
B
A
D
D
C
4.42
2.11 (53,59)
4.96
(112,3)
(126,0)
2.83 (53,59)
3.17 (80,52)
3.56 (90,42)
3.95 (100.33)
L
7.380
(187,45)
7.00
2.420
(61,47)
5
3
1
(177,8)
4
2
4.53 (115,06)
C
5.25 (133,35)
5.59 (141,99)
5.98 (151,89)
6.37 (161,80)
L
B
B
A
D
0.20
(5,1)
B
A
A
D
D
C
6.95 (176,53)
C
C
.25 ꢀYꢁ
#8-32 EꢀRD
6 ꢁPLACE
ø.150 .005 ꢀTHR 6 ꢁPLACE
(ø3,81 0,13)
#10-32 EꢀRD
2 ꢁPLACE
#10-32 EꢀRD
2 ꢁPLACE
MI-ComPAC™ DC-DC
Page 5 of 6
Rev 1.5
02/2015
MI-ComPAC™ DC-DC Switchers
Vicor’s comprehensive line of power solutions includes high density AC-DC and DC-DC modules and
accessory components, fully configurable AC-DC and DC-DC power supplies, and complete custom
power systems.
Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its use. Vicor
makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication. Vicor reserves
the right to make changes to any products, specifications, and product descriptions at any time without notice. Information published by
Vicor has been checked and is believed to be accurate at the time it was printed; however, Vicor assumes no responsibility for inaccuracies.
Testing and other quality controls are used to the extent Vicor deems necessary to support Vicor’s product warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
Specifications are subject to change without notice.
Visit http://www.vicorpower.com/mil-cots-power-systems/mi-compac_dc_power_supply for the latest product information.
Vicor’s Standard Terms and Conditions and Product Warranty
All sales are subject to Vicor’s Standard Terms and Conditions of Sale, and Product Warranty which are available on Vicor’s webpage
(http://www.vicorpower.com/termsconditionswarranty) or upon request.
Life Support Policy
VICOR’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF VICOR CORPORATION. As used
herein, life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and
whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to
result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform
can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. Per Vicor Terms
and Conditions of Sale, the user of Vicor products and components in life support applications assumes all risks of such use and indemnifies
Vicor against all liability and damages.
Intellectual Property Notice
Vicor and its subsidiaries own Intellectual Property (including issued U.S. and Foreign Patents and pending patent applications) relating to the
products described in this data sheet. No license, whether express, implied, or arising by estoppel or otherwise, to any intellectual property
rights is granted by this document. Interested parties should contact Vicor’s Intellectual Property Department.
Contact Us: http://www.vicorpower.com/contact-us
Vicor Corporation
25 Frontage Road
Andover, MA, USA 01810
Tel: 800-735-6200
Fax: 978-475-6715
www.vicorpower.com
email
Customer Service: custserv@vicorpower.com
Technical Support: apps@vicorpower.com
©2018 Vicor Corporation. All rights reserved. The Vicor name is a registered trademark of Vicor Corporation.
All other trademarks, product names, logos and brands are property of their respective owners.
MI-ComPAC™ DC-DC
Page 6 of 6
Rev 1.5
02/2015
相关型号：
©2020 ICPDF网 联系我们和版权申明